i got a deal on a 1994 LT1 with an auto transmission,wiring harness,PCM.

i have been looking over the LT1 swaps done here. and still have a few questions.

what wires from the old harness do i need to graft onto the 94 harness.

and what would be a good fuel pump to put into the tank. any TPI?

thanks for the help.
RS

 

I did the swap about 6 months ago and, if I remember correctly, you have to splice:
-a number of 12v lines
-tach
-oil pressure
-fuel enable
-VATS if you plan to keep it
-water temp?

I think thats about it, but I know it took quite a while to do all of the splicing and tracing of wires. Any TPI fuel pump will work.


------------------
-'92 RS with self-installed '95 LT1
-Heddman Headers
-TPIS throttle body airfoil
-MSD 6-AL Ignition
Kills
-'97 Mustang Cobra
-'98 V6 Camaro
-'89 5.0 ****stang
-'97 Sebring
-'96 ****stang Cobra

Losses
-'99 Mustang GT
-'96 Mustang Cobra
-'95 Z28 (good race)
-'96(?) Turbo Eclipse (d*mn good race, heavily modified)

 

TexasLT1: do you have any pics of you swap.
also you would not happen to have a wiring diagram of the 94'95 pcm would you.

thanks,
RS