2.8 to 350 rv cam
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 86
Likes: 0
Car: 84' camaro SC
Engine: 2.8l carb
Transmission: 700r4
2.8 to 350 rv cam
next week i start on my 350 build i could never be mor excited im 16 and im buying a 350 out of an old chevy truck it only has 47,xxx miles on it and it has an rv cam so im not gonna keep my tires that long lol but its only $150 for the motor radiator fuel pump and mounts and my 84 camaro v6 already has 700r4 so all i have to do is put it in put the new fuel pump in and radiator and it should start then i have to get a new accelerator pump but its all good ill post pics of the motor asap
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: 2.8 to 350 rv cam
Sorry bud ... You cannot use a V6 tranny with a V8 motor! You'll have to get a V8 tranny as well!
Also, an RV cam is just that ... a cam designed for a RV (ie Recreational Vehicle, ie WeenieBago). An RV cam is a small peanut cam to provide torque not hp. But any 350 will be a step up from a V6, and cams are easy to swap later.
Also, an RV cam is just that ... a cam designed for a RV (ie Recreational Vehicle, ie WeenieBago). An RV cam is a small peanut cam to provide torque not hp. But any 350 will be a step up from a V6, and cams are easy to swap later.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
The radiator won't fit, either.
Not sure on the fuel pump, but I'd be replacing it with a new 3rd gen carb V8 type when installing the engine.
I would guess you did not read the V6 to V8 swap sticky. You might want to do that now.
Not sure on the fuel pump, but I'd be replacing it with a new 3rd gen carb V8 type when installing the engine.
I would guess you did not read the V6 to V8 swap sticky. You might want to do that now.
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 86
Likes: 0
Car: 84' camaro SC
Engine: 2.8l carb
Transmission: 700r4
Re: 2.8 to 350 rv cam
I have read it and it said itl work it just wont be as strong but i thought the 700r4 is mostly for a v8 like for example doesnt the iroc use a 700r4
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: 2.8 to 350 rv cam
It does... not the same one as a V6 though.
Might want to check the sticky again.
Might want to check the sticky again.
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 24, 2015 09:01 PM






