Need some wiring help!
Thread Starter
Junior Member
Joined: May 2006
Posts: 70
Likes: 0
From: FT. Collins/Loveland
Car: 1989 IROCz
Engine: 5.3l LM7 Gen3
Transmission: 4l60
Axle/Gears: 10bolt auburn posi 3.42
Need some wiring help!
So I think I have most everything figured out but am stuck on the TCC lockup solenoid. I am doing a LM7 swap and using my 700r4 for now. Question is do i use Pin#42 tan/BLK wire to command it or the Pin#2 to command it (from the new pcm) also what about the top gear signal wire from the 700r4, what do i hook that too? Any help would be great thanks.
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Need some wiring help!
https://www.thirdgen.org/forums/ltx-lsx/
with a heading that gets attention like LM7 TCC lockup or similar
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
3
Jan 9, 2017 04:06 PM