Hey guys I bought a drop out from a 2011 Camaro SS from my work that will be going into my 84 z28 this summer. I have the swap mounts figured out and all the cross members and custom harnesses figured out and everything else right down to the driveshaft. The only thing I'm still stuck on is getting a shifter setup to work.

For those who might not know, the tr6060 uses a remote shifter mounted on a hinging bracket on the back of the transmission. If I leave this setup where it is the shifter will be back almost to the pocket of the center console, and this is obviously no bueno. I have looked around and haven't found a provider who makes a shifter kit for this swap, although I have seen a few people who fabricate their own. This isn't an issue, but I would rather buy something that I know will work and save myself the headache. Any suggestions? Thanks.

 

Also, if anyone here is looking for odds and ends for their own LSanything swaps then feel free to message me. I see all kinds from trucks to camaros to the occasional gto pass through my plant at LKQ.