Dyno results after engine swap to 350 TPI

 

Cool almost Stock LS1 area

 

have you taken it to the track?

 

No I have not run the car at a track. But it is a strong street car with nice Torque at 3300 RPM's.

 

Stock LS1 territory? Im seeing 210hp and 280ft/lbs.. Stock LS1 is around 290-300hp 295-305ft/lbs at the rear wheels. Stock L98s made at best 200rwhp and 280ft/lbs, so it looks like you're doing a bit better. Mid 14s I'd say.

Edit.. Get new rear end gears! =)

 

Nice numbers. I bet the rwhp and rwtq would be even better with less restrictive intake track.

FWIW:

Stock LT1's are in the 240-260 rwhp , 280-295 rwtq range
Stock LS1's are in the 280-310 rwhp, 290-320 rwtq range

The 01-02 LS1 cars tend to be the highest stock.

 

91 RS
May be the numbers COULD HAVE or SHOULD HAVE been
better. But I did not install every part someone said I SHOULD
Have. This engine is up and running with a Dyno Chart to prove its numbers and not like most of the Posts. Anyways thanks for your comment on the numbers.