opinion's on 350 HO
Thread Starter
Senior Member
Joined: Dec 2001
Posts: 559
Likes: 0
From: Leander, Tx
opinion's on 350 HO with TPI
i did seach and everybody use this motor with the TBI but what about TPI
i know i will have to get the scogin dickey TPI base plate but how strong will this motor be with a TPI on it. it's rated at 330hp 380ft lb's of torque but i'm sure the hp will go down with a TPI on it but how much.
i know i will have to get the scogin dickey TPI base plate but how strong will this motor be with a TPI on it. it's rated at 330hp 380ft lb's of torque but i'm sure the hp will go down with a TPI on it but how much.
Last edited by 87 B4Z; Mar 9, 2002 at 08:24 PM.
Joined: Mar 2000
Posts: 43,187
Likes: 46
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
See this thread https://www.thirdgen.org/techbb2/sho...threadid=91073 .
Not a direct test of the 330 HP, but should give you an idea.
Not a direct test of the 330 HP, but should give you an idea.
Thread
Thread Starter
Forum
Replies
Last Post
Billy Decker
Engine/Drivetrain/Suspension Wanted
0
Sep 4, 2015 03:46 PM