I've been so stressed with what to buy.

I didnt buy the SLP's because of clearance issues.

I went with Edelbrock TES can somebody tell me how much

of a difference in horespower an 1 5/8 are compared to 1 3/4

and what can I expect from these headers running comp cam

set up or better yet what 3"in exhaust setup should I run with

this?

prowler
"Floor it till it blows"

 

Building some good amt of HP on a 350 is best with 1 3/4. Other than that you should be fine.

 

The problem I have with the edelbrock headers is that they are stepped down to an 1 1/2 in places to broaden the low end torque, Or atleast they used to be, My car has way too much low end power, so I opted for the 1 3/4 to try to move the power band farther up the rpm range.

nick

 

Used to be, but current ones aren't. My Edels are 1-5/8" all the way back to the collector.