Prostreet87Z

hey i need a torque arm mount and bracket for a 700r4 lemme know what its gunna cost shipped to 85708 tucson az. thanks much

M&M_GTA88

iTrader: (2)

Looking for an electric Driver's side mirror. Shipped to 19348.

Ready to buy.

Mike

jjskibbs

looking for auto shifter plate w/ gear selector, and console lid with arm and spring. in good to mint condition.

ted gerlach

iTrader: (28)

84z350crate, as per our conversation i will due my best to find it today and will also let you know about a fender,

M&M_GTA88, sure hows $35 shipped

Street Lethal, trust me i know i have been plowing it for my job everytime it snows, this is insane and there is another one on its way, your very colse,, 6th to george, and your there,

ted gerlach

iTrader: (28)

Prostreet87Z, will need to check i know i have a 5-speed one just need to check on the 700r4 if there is one there,

jjskibbs, i have a good shift plate but only a ok used center console thats good for a car that missing one,

Blew-By-You

Hi Ted,

Was curious if you had any 90-92 leather steering wheels in good shape. . Also curious about any LS1 front brake parts or adaptors. I'm in New Brunswick so it'd be possible for pick-up. Thanks!

M&M_GTA88

iTrader: (2)

Sounds good for the Driver's Side electric mirror.

I'll PM you for payment.

david_beast

Do u have the both of the headlight motors?

Pistol Pete

iTrader: (2)

I think you replied to the wrong guy my friend.
You want to reply to third kid on the way.

david_beast

lol i thought i did?

evilemokid94

iTrader: (6)

do you have a radiator shroud for a 1990 camaro 3.1?

ted gerlach

iTrader: (28)

Blew-By-You, sorry no good stearing wheel, or ls1 brakes ,

M&M_GTA88, ok i will reply to your pm,

david_beast, yes i have 2 headlight motors, but are you looking for a 2 wire or 3 wire motor,

evilemokid94, upper, lower or everything with the fan,

blairva122

sorry not to have gotten back sooner. my work takes me all over the map without much down time. now i am looking for a t/a drivers side fender, door and 2 headlight motors. the motors are the 3 connection type out of an 85 t/a. i would like to get the door and fender in blue but it is not imparitive as the car is going to paint anyways. i'm in upstate ny so picking them up won't be a problem also looking for the external retainer for the t-tops the one that is in the center. i'm not exactly sure what they call it. you don't happen to have any 4th gen interior pieces also? in particular a center console complete for a manual trans? i know i'm looking for a lot, anything you could help with i'd appreciate. let me know how much you would like to get for a package deal. thanks in advance

HOTROD82CAMARO

I need a non power drivers door for camaro. My name is Robert and you can contact me at 248 481 0887.

Almo the Pirate

got a pair of rear, double stripe irocs?
preferably without tires but whatever.
how much would you take shipped to CA?

ted gerlach

iTrader: (28)

blairva122, yes i have the 3 wire headlight motors, sorry but no driver side fenders, have only one door and it has some dammage to the front edge, opened up into the fender, but the good side of it is no rust at all, yes i have a good center t-top bar, i have a center console from an 96 ta its an auto one but its not all busted up, and i might take the 02 camaro ss 6 speed console out of my formula since i am going to sell the car,

HOTROD82CAMARO, all i have is the one dor that has the dammage to the front edge of it,

Almo the Pirate, sorry no iroc rims at all.

jbucago

PM sent!

ikeepitreelz

What's up Ted? do you have any red GTA passenger fender?

ted gerlach

iTrader: (28)

jbucago, pm replyed to

ikeepitreelz, only fender i have in red is off a 91 trans am so you would have to make the holes to mount the ground effects

evilemokid94

iTrader: (6)

upper

ted gerlach

iTrader: (28)

evilemokid94, yes i have that part whats you e-mail address so i can send you a pic

chevychez

Hi, would you have the front turn signal lights for a 91 firebird, and would you ship to the UK? If so how much? Many thanks

49F1

I have a 350 out of a 88 trans am and a t5, I need a flywheel and bell housing, will go to New Jersey to pick up.

2kflhr

iTrader: (1)

Wow... this thread has been around awhile. Seems we did some business 4-5 years ago.

Ted, take the time to enjoy those kids. It seems like yesterday mine was wheeling around on his battery powered 4 wheeler and now he's in the Air Force learning to wrench B1B bomber engines.

He's in dire need of and trying to find a set of posi spider gears for a 3:42 26 spline carrier for his '91 RS (Z clone w/RS emblems). I'm trying to get the car fixed to take it to him from North Carolina to Texas. It was tore it down to replace the carrier bearing and noticed the spider gears are pitted and I hate to take it all the way out there and it break on him when he's torquing it up. The AF doesn't pay a whole lot so his funds are limited.

Do you mind taking a look to see if you have any? Or a 26 spline 3 series carrier. As you probably know it must be from a posi carrier, an open carrier has larger spider gears.

Thanks,
2kflhr

Thanks,

evilemokid94

iTrader: (6)

mitchell.sloan@hotmail.com

ted gerlach

iTrader: (28)

chevychez, asking $40 plus the shiping, whats your e-amil address to send you some pics,

49F1, i have a flywheel just need to check and see if its a one piece rear main seal or 2 piece. i have a lakewood bellhousing but no stock ones.

2kflhr, will try my best to help but sa of now i have no rear or rear end parts.

evilemokid94, e-mail sent reply back to get pics

lysol106

iTrader: (1)

Hey. I'm looking for a rear bumper cover for a 91 T/A or GTA. Let me know if you have one.

Thanks.

megaspl

do you still have any type of aftermarket suspension parts left? im looking for about everything but would like to start from the rear up

ted gerlach

iTrader: (28)

lysol106, yes i have one asking $40 plus shipping

megaspl, what are you looking for?

Almo the Pirate

Do you have the secondary AIR hose thy goes from the pump to the converter? From later model TPI motor, including check valve. Even if you just have from the check valve and most of the way to the cat.

BlueChevyZ

iTrader: (1)

you wouldnt happen to have a a/c delete panel laying around, would you?

Guest

any power antennas? if so im in

ted gerlach

iTrader: (28)

Almo the Pirate, what year are you looking for? and is it a single or duel cat set-up

BlueChevyZ, if you looking to the ac delete firewall box then sorry no i dont.

autodynamics, i might have one need to check

49F1

Hi, How much for the Lakewood bell housing, it's not going into my Camaro so stock don't matter. Have you checked that flywheel yet?
Joe

guzzler355

iTrader: (1)

Hey Ted. I am looking for a piece of weatherstripping for a 91 vert. It is the piece that is at the back of the driver window, and seals the vertical part of the window to the convertible top. Mine flew off on the highway...--Rob I can drive down and pick up.

FoodStampsz

Need a wrap around spoiler for an 86 F-bird trans am. Rear black honeycomb taillights in black, GTA wheels in black if you have them, full seat belts, rear hatch motor.

ted gerlach

iTrader: (28)

49F1, asking $230, due you knoe the difference i found it,

guzzler355, yes i have it pm me for my address and #

FoodStampsz, sorry no wrap arround spoiler, i have the taillights, at this time i only have 2 rear rims, i have all balck seat belts, and a rear hatch motor.

49F1

Thanks for looking but a friend showed up with a bellhousing yesterday and I think I'm going to just get a new flywheel

ted gerlach

iTrader: (28)

ok not a problem

2kflhr

iTrader: (1)

Thanks!

Hey, if any of you other guys know of any 26 spline posi carriers or spider gears available shoot me a PM. PLEASE

2kflhr

91rscammie

iTrader: (2)

You happen to have a 90-92 Z28 145mph cluster. If so how much to 13667?

ted gerlach

iTrader: (28)

91rscammie, sorry no 145mph clusters

lessthanhadley

Sorry if this has been covered before but it is a massive thread to go through. DO you have a trans am/gta hood for an 87? Color doesn't matter as long as its in great shape. Also a t-top black center bar and gray seat belts for an 87 gta with no cracks in the female ends and if possible buttons which aren't faded too badly. I could pick up.

Thanks,
Andrew

ted gerlach

iTrader: (28)

lessthanhadley, sorry no hood. all i have is a harwood cowl hood, and a flat hood, but my friend might have a hood i will check with him for you,
yes i have a t-top center bar asking $45
yes i have the frnt seat belt buckles/recevers asking $60
i know this has gone on for years and i try toreply to all inquires into parts, and i still have a bunch. was collecting parts for years before i even knew about here

lessthanhadley

Do you have a pic of the t-top bar? Is it rust free and in good shape?

Also is that for just the front receivers or the entire sets? How much would it be for back as well if they're available? Do you know if there were different colors of grey? I believe I've read before that there is so I want to make sure they'd be the right ones.

timmy87iroc

have any red door panels?

allgood

do you have any door stills for a 92 trans am

ted gerlach

iTrader: (28)

lessthanhadley, no pics but if needed i can get you some, thats just for the front recevers, and $40 if you want the back and yes they are from an 87, 82-84 had a lighter gray

timmy87iroc, i have red door panels from a leather interior in a 91 z-28 if interested

allgood, what color are you looking for?

allgood

black perferred but any color as long as they not crack

The Shock Doc

How about the metal retainers for the weatherstripping for a hardtop? They screw to the roofrail.