timmy87iroc

how much for the door panels and to ship to 47834?

lessthanhadley

Just to clarify... You will do Front and back reveibers for $100? These are free of scratches/markings, etc and also the buttons aren't faded out? Also no rust at all on the t-roof which you want $45 for? If this is the case I can probably make that work. WHere exactly in NJ are you?

firehawk95

The following is what I currently need for restoration projects. 2-rear GTA/TA wrap-around style rear spoilers, 2-rear hatch pull-down motors, 85 drivers side headlight motor, drivers side front hood grill? You may call Perry at (954)649-6960. THANKS

ted gerlach

iTrader: (28)

to everyone looking or inquiring about parts there will be a delay, had neck surgery,

allgood, will need to check on black but i might have a good pair.

The Shock Doc, i normally dont take them off but i due have a 91 rs camaro hardtop parts car currently in my driveway, i cant do anything but i might be able to have a friend come and take them off for me. let me know if interested

timmy87iroc , hows $120 shipped and i can get the wife to take some pics if needed just need e-mail address,

lessthanhadley $80 if just looking for the buckles front and rear, they are not perfect thay all get scratched, but they are not broken on chunks of plastic missing like most, the is some fade to the buttons. no rust on the t-top center bar. i am located in toms river.

firehawk95, sorry i dont have an spoiler that have been worth saving all / 99% are shot, i should have 2 good working pull down motors i check them before i sell them to make sure they are still good, since they have been sitting and moved arround, i should have a good headlight motor but is it a 2 or 3 wire motor for the driverside, and i would guess your looking for the big grill on the front of the hood for the driverside, i would have that

firehawk95

Hi Ted, I sincerely hope you dont have a serious neck injury, take care of that!!! Yes, a tough one on the Aero spoiler, they are usually cracked. One pull down motor will be for an 85, the other an 89, but I believe they are both the same. Drivers side headlight motor has a single 3-wire connector. Yes, the big drivers side front hood grill. PLEASE provide prices so I can make payment if they are reasonablly priced, and shipping could be UPS ground service to 32034 in the N. Florida Jax area. Thanks, Perry

Caveman305

iTrader: (8)

hey ted, im back to ask if you have a few parts, im looking for more of your price on them if you have them, so PM me a price shipped to 20705

first piece i need would be the pass side GFX for my 89 preferably black, but its going to paint so i dont mind if its another color(i dont need a badge, so if it doesnt have it or you want to keep it to sell thats fine) it has to be in pretty good condition, I don't mind scratches and what not, but mine is cracked from the P.O. not knowing how to jack it up properly, so i need it with all mounting points intact

the second piece i need is a Grille, i want a z style without fog lights if you have it, and i would prefer the style with the bow tie, but if you have a "Camaro" one i might sway towards that

send pics to Rcave89@gmail.com if you have either piece and please PM a price

hope you recover fast from your surgery! and there is no rush on the pics as im not ready to buy just yet(and my car will be a few months before paint), gotta wait for the next paycheck

and P.S. to Firehawk95 Ted is great on the pull downs, i bought one from him and haven't had a single problem with it(and i got to add a hatch popper to my camaro lol)

buymytransam

I need the brake lines that go from the master cylinder to the prop valve, the late style. Let me know if you have a pair.

Thanks,
Lenny

ted gerlach

iTrader: (28)

firehawk95, had to have 2 discs removed and a plate put in with some screws, to fuse it, also had to have hand and shoulder surgery was due to a car accident back in 08, as soon as i am able i will check the pull downs i have but its going to be about 2 weeks, i have a good driverside headlight 3 wire motor just went through all of them, last month and i will get the hood vent out and get you some pics also of everything, but like i said give me about 2 weeks to heal up a bit,

CaveCock , will check on the ground effect i know i have 3 of them 1 blue, 1 black, and 1 silver but i think the blue one and the black one both have some kind of damage, but the silver one is mint, just give me some time to get them out and check them out, so you looking for a fog light grill with the bowtie off a 91-92 z-28 i should one but will need to check i know i have the one that says camaro on it,

buymytransam, i have a mastercycliner with the prop valve and brake booster all together its from a 91 z28 camaro, will check to see if the lines on that will work for you.

FirenScuba

any iroc rims? rear ends with disc?

Caveman305

iTrader: (8)

sounds good, if the silver GFX is mint i could work with it, ive gotta prep the whole car anyways so it doesn't matter and yes a bowtie grill would be awesome, but if the price is right i think i could work with the "camaro" one

pics to my email and Price w/shipping to 20705 when ever you are feeling up to it, no rush on my end, i have a long way to go before the car goes to paint

just PM me whenever you get feeling good enough to check everything out


Ron

lessthanhadley

So $80 for the buckles and $45 for the t-top bar.... That sounds good to me. Could you check on shipping to 19464? I'm not too far away but it may be awhile til I get a chance to make it out that way. If it can't happen instantly no big deal. Best of luck on your recovery.

ted gerlach

iTrader: (28)

FirenScuba, are you looking for single or double stripe rims, i dont have any rears at this time but i due have an iroc comming in to settle a debt, not sure of the rear or if its disc or not, will hopefullty have it here before the end of the week,

CaveCock, e-mail sent reply back so i can send you pics as soon as it stops raining

lessthanhadley, i got a quick estimate its $23.67 to ship. going to have the wife take some pics of the parts for you

firehawk95

Hi Ted, NO problem on the wait!!!! Go ahead and get yourself better, as you've just had some very serious surgery. I was hit by a 30-ton firetruck back in 2001 and have 2-herniated discs in my neck and 1 in my low back and had to just get used to living with the pain w/o medication, but my injury is in no way as bad as yours is!!!!! P.S. Possibly you might come across an Aero spoiler in that time... Sincerely, Firehawk95

resinlake

Good afternoon Ted! Just stumbled in on your thread here, sorry to hear about neck surgery, hope you mend up fast, good weather coming! No hurry here but do you have any black bezel camaro window switches?

Thanks,
-Res

ted gerlach

iTrader: (28)

firehawk95, thanks for understanding, and just to give you a second ouch, i have a 6 inch rod in my back i was struck at a red light by loaded mack truck 80k pounds in my dad GN 14 years ago, hope you feel better, also i know this just sucks to be hirt, will keep my eye out for a rear spoiler,

resinlake, me too i think i might have 2but will need to check them,

resinlake

much appreciated on the response, and i really mean it no hurry, mend your neck. Ive been broadsided and took a car in a pond and lost a tie rod once leading to a guard rail on April Fools day, but I cant imagine a dump truck, wish the best to you.

firehawk95

Hi Ted, I hope your feeling better today. Would you happen to know if there is any way to check production numbers for different colors(namely, bright blue metallic)of a 1990 model IROC Z convertable on this SITE or any other? I do know this color was only available for the 1990 model year. Thanks for any possible HELP... Sincerely, Firehawk95

ted gerlach

iTrader: (28)

resinlake, my back surgery was on april fools day, but for me it was no joke, but i was not hit by a dump truck but a truck with a 50 foot trailer,

firehawk95, not sure but there has got to be info like that out there on the web somewhere, your car is the best of both worlds, old body style, aka ground effects and rims with the new style interior. yellow dash and air bag, and in that blue to boot thats so awsome, blue [ aka medium quazar blue metalic] was used as far back as 85 on camaros, but in 91 and 92 is where you got one 1 year only odd colors,

lessthanhadley

So $80 for the receivers, $45, for the t-bar and roughly $25 for shipping? If you wouldn't mind the pics when your wife can and either pm them or pm me for my email I should be good to go assuming that all is in the level of shape I'm looking for (doesn't have to be perfect).

Thanks

firehawk95

Hi Ted, the only Camaro I currently own is a 100,000 mile bright red w/black stripes 92 25th Anniv. Heritage Edition RS T-top LO3 305 EFI with a rare 5-speed that I bought for $500 that needed the front cap replaced from being spun out in the rain by my friends 16-yr old son in St. Augustine. I am considering buying a 90-92 IROC Z or Z/28 convertable and I was curious about color production #'s for them to start my hunt. I have wanted a conv, but being they only came with the 305 TPI, I never bought 1 in the past. Sincerely, Firehawk95

ted gerlach

iTrader: (28)

lessthanhadley, hope to have pics up soon,

firehawk95, pm sent with some info, i can help and where are you located? i could be interested in the wrecked car also

firehawk95

Just before I bought the wrecked car, I bought a local non-running 91 Camaro R/S w/a blown 6-cyl engine and a mint body, 4-brand new tires, good 16-inch wheels, and a good interior for $200 on Craigslist. I put the front cap on the wrecked car, stripped the other good parts off it, then had the scrap-yard pick it up afterwards for $150. So, SORRY, its not wrecked anymore and I drive it on occasion now, and I have only $800 into the car now w/cold A/C.... Sincererly, Firehawk95

ted gerlach

iTrader: (28)

no problem understood, well when you get a chance e-mail me or call me, i have a 91 z-28 convert with 92k on it, its the wifes car and since we are expection our 4th child she has been thinking about putting it up for sale

88FormulaKiller

iTrader: (8)

i know im pushin my luck and saw someone ask already but im looking for BOTH front hood vents for a GTA / Trans am Hood, preferably in Black shipped to MA if you have a set. need the larger ones in the front, dont need the smaller vents in rear. thanks

86transam.man

iTrader: (3)

Do you have a non groundfx front bumper cover like one that would have come on a 86 base model Firebird? If so what would it be shipped to Oklahoma City? Thanks

ted gerlach

iTrader: (28)

88FormulaKiller, i only found one so far and its the passanger side still in the hunt for the driverside,

86transam.man, yes i have one hows $130 shipped e-mail me at
wtg3575@aol.com if you would like some pics.,

rdhanded2

iTrader: (3)

I am looking for a taillight wiring harness for an 85-90 Trans Am

89RSTBI

iTrader: (5)

hey I also need pas side ground effect for a 89 RS and I noticed you said you have 3, 1 without damage that is already spoken for and 2 with a little damage, what type of damage are we talking about? Mine had the same problem where someone had jacked the car up at the wrong spot and cracked mine. I do not need any badges either so just as above you can remove them if you like. Just wondering what the damage is on the parts you have and if they can be worked with that will be fine for me because I am not building a show car or anything just want something that looks better than what i have. My car is black as well but that doesn't matter because I hope to get it painted as soon as I get the engine finished for it

Speedfreak391

iTrader: (1)

Do you have any sub frame connectors?

ted gerlach

iTrader: (28)

rdhanded2, what year is you car, 89 harness is a little different,

89RSTBI, mine is not cracked but does have a scrape in it, that what i ment by damage, if interested i could take some pics for you just need your e-mail address

Speedfreak391, sorry no i dont,

89RSTBI

iTrader: (5)

message sent with email address also my zip code is 28016

fatam05

Hey ted you wouldn't happen to have a front bumper cover that will fit an 89 formula would ya. Paint doesnt matter but I would really like one without cracks in it. let me know what you want for it.

lessthanhadley

Hey Ted... No real rush but I was just checking on the status of the pictures for the t-bar and the grey seatbelt receivers.

Thanks

FirenScuba

got any iroc wheels? or red drivers seat?(not torn)

ncussans

I need ground effects for both sides 89 Camaro

ted gerlach

iTrader: (28)

89RSTBI, got your e-mail will send the pics tomorrow

fatam05, yes i have a front cover hows $50 plus shipping

lessthanhadley, yes i have the pics for you will get them to you tomorrow

FirenScuba, i have a set of 88-89 double strype irocs in gray tires are shot will have them removed asking $300 o.b.o. plus shipping, sorry no red seats,

ncussans, rocker and door ground effetcs

ncussans

I need sideskirts, z28 both sides. Really want leather seats

ted gerlach

iTrader: (28)

ncussans, what year side skirts, sorry but i dont have and leather seats

1Broke_camaro

any convertable pieces?

ted gerlach

iTrader: (28)

1Broke_camaro, what parts are you looking for i have some convert parts

1Broke_camaro

ermmm its hard to explain but the button that you press to pop open the tonneau cover. a new top and a piece on the right side of the frame that snapped on me. lol if you have a spare frame ill snap a pic of what i need. possibly just a whole new frame



ill be back in MD/PA area in about a week or so, so if you have a frame then i can just stop over and check out and grab what i need so you dont have to worry about shipping

Bobby Suth

iTrader: (2)

how about passanger door panel cap(black)for 90 firebird.and if so how much shipped to 38220

ted gerlach

iTrader: (28)

1Broke_camaro, if you bring the broken button i can try to rebuild it for other parts buttons i have, thats fine and i have a compete frame as well as a parts one,

Bobby Suth, i have some door panels with the caps on them will see if they are good and try to get one off first.

Bowtiebruiser

Looking for a dash pad and non grid style tail lights

ted gerlach

iTrader: (28)

Bowtiebruiser , i am guessing for a camaro, yes i have the stock non grid taillights, and i have 2 dash pads , one thats very nice and one the has a small crack from me,

Bobby Suth

iTrader: (2)

Might need drivers door lock button.no I do need drivers door lock button

Bowtiebruiser

How much for the Tail lights and dash pad shipped to 13603?

ted gerlach

iTrader: (28)

Bobby Suth, i have a door lock button,

Bowtiebruiser, pm me i need complete address for shipping charges

1Broke_camaro

i ahve the switch i just need the little thing on the outside that you actually push mine fell out. i just need the little piece lol i can put it back in. and ill get a pic of the piece i need on the frame or ill just come up to NJ next week when i come home

Bobby Suth

iTrader: (2)

how much total part and ship to 38220,atwood,TN.