Boosted357

Hey guys i just picked up a 4th gen washer tank reservoir for my 3rd gen and the install seems pretty simple. The question i had is about the pump that is located on the 4th gen reservoir. I was wondering do i keep that mounted and run a longer hose to that pump or do i remove that pump and just run the hose inside the reservoir? If i do in fact use that pump how do i wire it. I havent looked to much at my stock reservoir but from what i recall there isnt a pump located on the stock tank, it just has the hose going into the cap and a hose pickup on the inside? Any clearification would be great. Thanks in advance

Boosted357

Alright well i figured it out myself. I ended up removing the pump from the 4th gen tank and running a hose into where the pump was at. Everything is working great and it looks so much better then a big tank sitting on the fender.

Tibo

iTrader: (15)

The wheel arches really can look nice, removing the tanks is just the first step.

Camaromac24

This is what i did for mine, i do agree it looks so much cleaner when they are not there.

https://youtu.be/Ju9B3ngJW7M

bholmes

When you guys remove the plastic air dam, did.you have any cooling issues!? Could you post/send pics of your install! I'm wanting to.do.as well!!TIA

91banditt2

iTrader: (1)

Most people have issues with their temps running higher without the front air dam, you may get more traction with this on the Cooling board?
Cooling - Third Generation F-Body Message Boards