Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
04-10-2008, 12:25 AM
#201
Junior Member
Join Date: Oct 2002
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS Convertible
Engine: 10:1 355 L98
Transmission: 700R4
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
I'm thinking of sending in my down payment, I just don't know if I'll like it with my paint color.
Would anyone be willing to do some Photoshopping for me?
Would anyone be willing to do some Photoshopping for me?
04-10-2008, 04:13 PM
#202
Supreme Member
iTrader: (3)
Join Date: Sep 2007
Location: St.cloud fl.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90RS Conv.
Engine: 383 w/ small shot
Transmission: th400
Axle/Gears: moser 9in
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
your car would look good with the all clear
04-10-2008, 08:54 PM
#203
Junior Member
Join Date: Oct 2002
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS Convertible
Engine: 10:1 355 L98
Transmission: 700R4
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
You think so?
I was leaning towards a Smoked or Dark Smoked since I've never really liked the all clear look (except on silver or white cars).
Thanks for the input.
I don't want to derail so if anyone would we willing to Photoshop the picture I posted above I would really appreciate it. Just PM me with a picture once you're done. If not, I understand.
Thanks guys
I was leaning towards a Smoked or Dark Smoked since I've never really liked the all clear look (except on silver or white cars).
Thanks for the input.
I don't want to derail so if anyone would we willing to Photoshop the picture I posted above I would really appreciate it. Just PM me with a picture once you're done. If not, I understand.
Thanks guys
Last edited by Feniks9174; 04-10-2008 at 09:08 PM.
04-11-2008, 12:27 AM
#204
Member
iTrader: (3)
Join Date: Aug 2002
Location: Austin, TEXAS
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2x1991 & 2000 Camaros
Engine: 350, 305 & LS1
Transmission: TH-700R4 and 4l60E
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
I would go with smoked or dark smoked.
Clear would look out of place with the red rear brake light so close.
Clear would look out of place with the red rear brake light so close.
04-11-2008, 04:18 PM
#205
Junior Member
iTrader: (1)
Join Date: Apr 2003
Location: Oshawa
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 5.7 TPI
Transmission: 700R4 w/2600 stall
Axle/Gears: 3.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
So what's going on w/this, is it just the lens that's getting made or is it going to be the entire housing??
04-11-2008, 06:54 PM
#206
Supreme Member
iTrader: (3)
Join Date: Sep 2007
Location: St.cloud fl.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90RS Conv.
Engine: 383 w/ small shot
Transmission: th400
Axle/Gears: moser 9in
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
good point. The only reason i said clear is the al. rims and no tint or anything dark.
I have the 90rs vert im going for the all black look,I want the all red,dark smoked. And for the spoiler light ill nightshade it
04-11-2008, 07:47 PM
#207
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
LENSES ONLY
We could possibly have the full housing and lens made for $400 total...give or take. But I feel most here wont pay the $400 so they probably wont be looked into much.
04-12-2008, 04:32 PM
#208
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
im a lil confused by some of the posts.
are these going to be made all clear, or is there a color choice?
id call them, but its saturday evening, and im ancy.
are these going to be made all clear, or is there a color choice?
id call them, but its saturday evening, and im ancy.
04-12-2008, 10:05 PM
#209
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Single color lenses, any basic color.
04-13-2008, 10:16 PM
#210
Member
Join Date: Mar 2004
Location: Holland, MI
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Black IROC 'vert
Engine: 305 TPI
Transmission: 700-R4
Axle/Gears: 2.73 posi
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
What is the production status on these? I emailed them a few days ago and haven't gotten a repsonse yet. Getting ready to get the car out for the season and would like to have a set to replace my stock scuffed up lenses.
04-14-2008, 08:15 AM
#211
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
*Sigh*
As long as it takes...I dont know anything about molds for lenses so Im waiting...they'll e-mail all those who have sent a DP so when they do then you can start asking when will the full production run be made....until then we're waiting for them (as they recently had a bad product run...chemicals or something of the other). So they're getting new chemicals and will be getting back to them ASAP...
PLEASE BE PATIENT EVERYONE. I am as anxious as everyone of you, so give it some time and let them do they're thing, yes this does seem to be taking longer than expected but thats a good thing, ensuring all those with their DP's in and those without can save a little $$$ on the side for these in the future....and allow them to make the best runs possible.
As long as it takes...I dont know anything about molds for lenses so Im waiting...they'll e-mail all those who have sent a DP so when they do then you can start asking when will the full production run be made....until then we're waiting for them (as they recently had a bad product run...chemicals or something of the other). So they're getting new chemicals and will be getting back to them ASAP...
PLEASE BE PATIENT EVERYONE. I am as anxious as everyone of you, so give it some time and let them do they're thing, yes this does seem to be taking longer than expected but thats a good thing, ensuring all those with their DP's in and those without can save a little $$$ on the side for these in the future....and allow them to make the best runs possible.
04-16-2008, 09:14 PM
#212
Supreme Member
iTrader: (7)
Join Date: Nov 2000
Location: michigan
Posts: 13,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
chemicals typically aren't bad but if you send them a bad light to pull molds then that's a problem. i wouldn't be surprised if you don't see anything until mid or late summer... hope that i'm proven wrong though.
04-20-2008, 02:35 PM
#213
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Here is an update guys...
Originally Posted by Jason @ KLEARZ
Hello Chris,
I just want to give you an updated on how things are coming. Its been a nitemare of a last month and a half trying figure out what was causing the molds to breakdown after just a couple castings. I ruined over a grand of mold rubber, and wasted a wholle lot of time before I finally figured out my scale was giving me bad measurements. Anyway, it seams like we have the problem solved now, and I can finally pour the molds for the Camaro tails. I'm sorry it took awhile, but I just couldn't pour them until I was sure the problem was solved given how expensive the molds will be and the massive amount of labor involved in making them. I'll hopefully have some pictures of finished tails in the next couple weeks. Thanks again for your patience,... as well as all the other people waiting on these tails. We'll make sure it was worth the wait.
Have a good one,
Jason
I just want to give you an updated on how things are coming. Its been a nitemare of a last month and a half trying figure out what was causing the molds to breakdown after just a couple castings. I ruined over a grand of mold rubber, and wasted a wholle lot of time before I finally figured out my scale was giving me bad measurements. Anyway, it seams like we have the problem solved now, and I can finally pour the molds for the Camaro tails. I'm sorry it took awhile, but I just couldn't pour them until I was sure the problem was solved given how expensive the molds will be and the massive amount of labor involved in making them. I'll hopefully have some pictures of finished tails in the next couple weeks. Thanks again for your patience,... as well as all the other people waiting on these tails. We'll make sure it was worth the wait.
Have a good one,
Jason
04-21-2008, 10:48 AM
#214
Member
iTrader: (1)
Join Date: Oct 2004
Location: Munford, TN
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 z
Engine: Chevy 383
Transmission: 700R4
Axle/Gears: 9 bolt 3.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Thats good to hear they have figured out the problem. I feel better knowing they aren't rushing things along.
05-13-2008, 11:12 AM
#215
Supreme Member
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
It's good that their not rushing the procces and taking the time to do it right but man I want a set already... any idea of when these will be ready for sale?
05-13-2008, 12:05 PM
#216
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
They gave us a 2week announce that they would have pictures up, so when pictures are up I feel they will be ready for mass production a week or so afterwards...
Believe me guys I have all my buddies YELLING at me to get my IROC going already, so your not the only ones yearning to get these ASAP...haha.
05-16-2008, 01:02 PM
#217
Supreme Member
Join Date: Oct 2001
Location: Olean NY USA
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Can't wait to see these. I have been waiting for an alternative to my GTS blackouts.
05-16-2008, 03:22 PM
#218
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Hopefully soon....
05-22-2008, 10:35 PM
#219
Member
iTrader: (1)
Join Date: Nov 2007
Location: Surrey, BC, Canada
Posts: 312
Likes: 0
Received 4 Likes
on
2 Posts
Car: 1991 Z28 Convertible
Engine: 305 TPI
Transmission: 5-speed
Axle/Gears: 10 bolt, 3.08
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
I want smoked rear lights too but have I not already seen them on Camaros? Could swear people already do.
05-23-2008, 10:53 AM
#220
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
BUT
With the KLEARZ lenses these lenses are CLEARED then filled with black to give the smoked look, thus ridding any type of red or amber in the lens as you get when you nite-shade or even paint with the transparent paints.
06-12-2008, 12:01 PM
#222
Supreme Member
iTrader: (3)
Join Date: Sep 2007
Location: St.cloud fl.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90RS Conv.
Engine: 383 w/ small shot
Transmission: th400
Axle/Gears: moser 9in
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
bump:: any new info?
06-12-2008, 01:51 PM
#223
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Just sent an e-mail. Hopefully they have something for us.
Does anyone know of VHT's new product SMOKE. Its to tint your windows...I havent tried it but if someone has let me see the finished window....thanks.
P.S. They are banning VHT products where I live because of all the junkies huffing that ****...so I have to go out of town to get some nite-shades for my 300zx and smoke if I plan to tint that way....its BS I swear...but I guess it makes it a safer town???? Yeah right...now they'll be asking us walkers for money and stealing shyt instead of killing themselves...ah well.
You all take care and please dont huff our automotive products.
Does anyone know of VHT's new product SMOKE. Its to tint your windows...I havent tried it but if someone has let me see the finished window....thanks.
P.S. They are banning VHT products where I live because of all the junkies huffing that ****...so I have to go out of town to get some nite-shades for my 300zx and smoke if I plan to tint that way....its BS I swear...but I guess it makes it a safer town???? Yeah right...now they'll be asking us walkers for money and stealing shyt instead of killing themselves...ah well.
You all take care and please dont huff our automotive products.
06-12-2008, 04:01 PM
#224
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
UPDATE
Originally Posted by Jason @ KLEARZ
Hello Chris,
Sorry I've been out of touch for a bit. I am STILL fighting with my supplier over the product they are sending me. Basically in a nutshell, the product I have used to make my molds for the past six years has went to crap. Once I make a mold with it, I "HAVE" to do a lens pour every 12 hours without exception or else the molds completley break down. I am currently experiementing with other products,... and I am pretty sure I've found a new "good one". Again, I just have to be sure before I make $1500+ worth of molds for the Camaro tails.
Also, there is something else I wanted to discuss. I think I am going to make the camaro tails in at least two pieces. The rounded outside end will be seperate and then the flat back will be seperate as well. I will make a flange on the two halves and then epoxy them cleanly together. I made one mold out of the crap material I am using now (and it brokedown allready). The mold is SOOO heavy that it was killing me to move it. I had a spinal chord injury a year and a half ago, and I have to be super careful with my back now. So yeah, long story short... breaking the tail into two sections will make the mold much much lighter, and will even give people a little more choice in color variations. There is a SMALL possibility that I will further break the lens into 4 pieces, so people can choose individual color combinations for the entire lens. Maybe see if you can get some feedback on that idea and what kind of interest there is.
NOTE: IT WILL BE MADE INTO A SINGLE MOLD ONCE COLOR IS FINISHED, THESE WILL NOT COME TO YOU IN 4 PIECES BUT A COMPLETE 1 PIECE LENS...SO DONT THINK YOUR GETTING PIECES YOU NEED TO GLUE TOGETHER BECAUSE YOU'RE NOT.
Once again, please pass my apologies along to everyone on this project for the delay. I am really excited to get them into production as I was/am a BIG fan of the camaros. To this day, my uncles 88 white Iroc with the Daytona hood is one of my favorite cars. We've had SUCH a huge response t our waiting list, that it is going to be a big seller for us. Just give us a little more time and we'll have them into production. Hopefully within a month, we'll be able to start sending out the first few sets.
Let me know if you have any questions.
Have a good one,
Jason
Sorry I've been out of touch for a bit. I am STILL fighting with my supplier over the product they are sending me. Basically in a nutshell, the product I have used to make my molds for the past six years has went to crap. Once I make a mold with it, I "HAVE" to do a lens pour every 12 hours without exception or else the molds completley break down. I am currently experiementing with other products,... and I am pretty sure I've found a new "good one". Again, I just have to be sure before I make $1500+ worth of molds for the Camaro tails.
Also, there is something else I wanted to discuss. I think I am going to make the camaro tails in at least two pieces. The rounded outside end will be seperate and then the flat back will be seperate as well. I will make a flange on the two halves and then epoxy them cleanly together. I made one mold out of the crap material I am using now (and it brokedown allready). The mold is SOOO heavy that it was killing me to move it. I had a spinal chord injury a year and a half ago, and I have to be super careful with my back now. So yeah, long story short... breaking the tail into two sections will make the mold much much lighter, and will even give people a little more choice in color variations. There is a SMALL possibility that I will further break the lens into 4 pieces, so people can choose individual color combinations for the entire lens. Maybe see if you can get some feedback on that idea and what kind of interest there is.
NOTE: IT WILL BE MADE INTO A SINGLE MOLD ONCE COLOR IS FINISHED, THESE WILL NOT COME TO YOU IN 4 PIECES BUT A COMPLETE 1 PIECE LENS...SO DONT THINK YOUR GETTING PIECES YOU NEED TO GLUE TOGETHER BECAUSE YOU'RE NOT.
Once again, please pass my apologies along to everyone on this project for the delay. I am really excited to get them into production as I was/am a BIG fan of the camaros. To this day, my uncles 88 white Iroc with the Daytona hood is one of my favorite cars. We've had SUCH a huge response t our waiting list, that it is going to be a big seller for us. Just give us a little more time and we'll have them into production. Hopefully within a month, we'll be able to start sending out the first few sets.
Let me know if you have any questions.
Have a good one,
Jason
Last edited by I H8 WWD; 06-12-2008 at 04:08 PM.
06-12-2008, 08:05 PM
#225
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
That's great news for me. Now it looks like they may be able to do clear revearse with red or amber turns, and the rest red.
I think they will be able to sell more units having the ability to do this.
I think they will be able to sell more units having the ability to do this.
06-12-2008, 08:33 PM
#226
Supreme Member
iTrader: (3)
Join Date: Sep 2007
Location: St.cloud fl.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90RS Conv.
Engine: 383 w/ small shot
Transmission: th400
Axle/Gears: moser 9in
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
it could be easier to put LEDS back there to. Maybe he could not seal them just send them seperate.but with the epoxy. just a thought
06-12-2008, 09:28 PM
#227
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
this is really dragging out.
while they are doing taillights, how bout some nice clear tag lens?
id buy a set of those for a spare too!
while they are doing taillights, how bout some nice clear tag lens?
id buy a set of those for a spare too!
06-13-2008, 06:05 PM
#229
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
They are doing the tag lights!! And dragging out, come on you guys. Obviously he is having difficulties with the molds, I'm sure he is also keeping his business up with the other products he currently offers. Do you really expect this happen quickly? Do you guys realize what he has to do in order to make these? I would say he is still in the "R&D" stage. I'd be happy to have them by next summer. And I am the one who donated the set of taillights that he is using to make the molds. I am really excited that he is willing to take this project on.
06-13-2008, 07:01 PM
#230
Senior Member
iTrader: (4)
Join Date: May 2006
Location: Beloeil, Quebec
Posts: 704
Likes: 0
Received 2 Likes
on
2 Posts
Car: IROC-Z
Engine: LSx
Transmission: T56
Axle/Gears: Fabbed 9"
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Bah, at least its good news. I cant wait to see the finished product tho!
06-17-2008, 10:50 AM
#231
Member
Join Date: Mar 2005
Location: cleveland
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro z28
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
If somebody has made molds like this on other cars and such I don't see why this would be such a problem that it is. I mean come on feels like its been years... I mean its not like we need these lenses to drive our cars but you get what I am saying.
07-05-2008, 11:34 AM
#233
07-06-2008, 09:48 AM
#235
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
i hope not, but how much time and money can you invest before you see a return?
07-06-2008, 10:27 AM
#237
Supreme Member
iTrader: (12)
Join Date: Aug 2005
Location: M.D
Posts: 1,923
Likes: 0
Received 2 Likes
on
1 Post
Car: 1987 Camaro
Engine: 350 hsr
Transmission: 700R4(blown)
Axle/Gears: 3:73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
I am chilled out, all i wanted to know was if there is an update...what they are up to ( if its good or bad) just wanted to know whats going on. I dont mind waiting like ive been doing.
07-06-2008, 09:46 PM
#239
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: p'cola FL
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
how much money would you dump on something before you went broke or gave up?
im all for them..... dont get me wrong. its just all the hype and no results.
i dont know the 1st thing about setting plastic in molds, so im not saying anything derogatory towards the company.
07-11-2008, 06:32 PM
#240
Member
iTrader: (4)
Join Date: Jun 2007
Location: Rock Falls, Illinois
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 and 91 Camaro RS
Engine: 350ci TPI and 305ci TBI
Transmission: 700R4
Axle/Gears: 2.73 One-wheel wonder
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
Ok so if they are able to do multiple pieces then epoxy them together it will be possible to get lenses with clear reverse lights?
I photo shopped examples below. If they can do em like that then I'm most likely in if they are around $200.
and has there been any update as to where they're at in production? Any teaser proto-type pics yet?
I photo shopped examples below. If they can do em like that then I'm most likely in if they are around $200.
and has there been any update as to where they're at in production? Any teaser proto-type pics yet?
07-11-2008, 09:55 PM
#241
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
UPDATE
I emailed today and here is the response:
I emailed today and here is the response:
Hi,
Thanks for the email. I know we've been keeping people waiting for awhile now. We have to make sure we have good material before we produce these as the molds will be VERY expensive and time consuming to make for such a big tail light. We've pretty much got our problem with bad mold materials solved. Basically,... I am waiting for a shipment of material coming from the US which we will have as of August 22nd. As of that date, I will begin making all the molds, and the first units will be available about 1-2 weeks later. Everyone has been very patient, and I appreciate it. I am going to make sure everyone gets the high quality lenses that the 80's camaros deserve after 20+ years of use. I've been a big fan of the Camaro's since I was a teenager, and cannot wait to see the impact these tails make on all those Camaros still left out there. Just try to be a little more patient,... and I can promise it will be worth your while. Thanks again for the email,... and we'll be in touch as soon as they are in production
Jason
www.klearz.com
Thanks for the email. I know we've been keeping people waiting for awhile now. We have to make sure we have good material before we produce these as the molds will be VERY expensive and time consuming to make for such a big tail light. We've pretty much got our problem with bad mold materials solved. Basically,... I am waiting for a shipment of material coming from the US which we will have as of August 22nd. As of that date, I will begin making all the molds, and the first units will be available about 1-2 weeks later. Everyone has been very patient, and I appreciate it. I am going to make sure everyone gets the high quality lenses that the 80's camaros deserve after 20+ years of use. I've been a big fan of the Camaro's since I was a teenager, and cannot wait to see the impact these tails make on all those Camaros still left out there. Just try to be a little more patient,... and I can promise it will be worth your while. Thanks again for the email,... and we'll be in touch as soon as they are in production
Jason
www.klearz.com
07-11-2008, 11:50 PM
#242
Supreme Member
iTrader: (3)
Join Date: Sep 2007
Location: St.cloud fl.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90RS Conv.
Engine: 383 w/ small shot
Transmission: th400
Axle/Gears: moser 9in
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
i gotta say that besides the fact that I have 20 bucks invested in this, this company def. has my bus. Personally i would rather wait for a great product, verses getting something flashy that poops out in a year or 2.
JASON AT KLEARZ.. take your time, get it perfect,dont rush anything.
JASON AT KLEARZ.. take your time, get it perfect,dont rush anything.
07-12-2008, 02:00 AM
#243
Supreme Member
iTrader: (7)
Join Date: Nov 2000
Location: michigan
Posts: 13,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
wish you guys the best. the material he needs is easily available in under a week. the type of mold he's doing though will yellow so those going clear might want to pick up an extra set and vaccum pack them somehow for a rainy day.
07-17-2008, 02:50 AM
#246
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
so not to sound like im complaining or anything (im really not) but when he said the molds will be "VERY" expensive, does that mean we take the hit as far as money goes? Im definitely for this if it works out well but i couldnt help but wonder about that, cant wait to see the results
07-17-2008, 08:58 AM
#247
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
These WILL NOT YELLOW, but will become darker over time...THATS IT
NO YELLOW
JUST DARKER COLOR.
Originally Posted by KLEARZ HOME PAGE
At Klearz, we specialize in making clear and colored reproductions of virtually any vehicle lens. We can also produce housings or any other plastic parts.
We can duplicate any stock lens in clear or any basic color including black for a smoked effect.
Our lenses are made with UV resistant material and will not yellow overtime but may darken like all stock lenses.
We only have a few products available now but we are growing very fast.
If you have a particular lens that you would like reproduced in another color or clear, email us and we will get back to you as soon as possible, usualy within the same day.
We can duplicate any stock lens in clear or any basic color including black for a smoked effect.
Our lenses are made with UV resistant material and will not yellow overtime but may darken like all stock lenses.
We only have a few products available now but we are growing very fast.
If you have a particular lens that you would like reproduced in another color or clear, email us and we will get back to you as soon as possible, usualy within the same day.
so not to sound like im complaining or anything (im really not) but when he said the molds will be "VERY" expensive, does that mean we take the hit as far as money goes? Im definitely for this if it works out well but i couldnt help but wonder about that, cant wait to see the results
Some or those who have sent in a $20 Down Payment will only pay $180 (Plus shipping of course) and $10 if color is wanted...
Right now he/she/KLEARZ is making 4 separate molds for each GRID COLUMN SO WE CAN HAVE CUSTOM COLOR COMBINATIONS.
This is so we can have CLEAR REVERSE and DARK SMOKED RED turn and brake lens. Instead of one single color throughout the full lens.
Give this some time as they are doing their best to get these HOW WE WANT.
Last edited by I H8 WWD; 07-17-2008 at 09:02 AM.
07-17-2008, 03:59 PM
#249
Supreme Member
Thread Starter
iTrader: (5)
Join Date: Aug 2006
Location: Cleveland, Ohio
Posts: 2,491
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89' IROC-Z
Engine: LO3
Transmission: 700R4
Axle/Gears: 10-Bolt/2.73
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
No problem, just trying to get more products out there for us...
07-19-2008, 12:42 AM
#250
Supreme Member
Join Date: Sep 2000
Location: Chicago, IL
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 305
Transmission: 700r4
Axle/Gears: TBD
Re: Group Buy: www.KLEARZ.com Camaro Tail Lights ( Clear, Smoked, Red, DARK Smoked )
this is great!