hawksthirdgen

Shipping is only $10 to anywhere in the continental US. (AK, HI, Canada and other international address' will need to have a shipping quote) Include your other parts at same time and receive additional discounts! THESE ARE IN STOCK AND READY TO SHIP!! Kit takes about 30 minutes to install, comes with instructions. Kit is a 10,000k blueish/white color. Normal retail is $129.95 plus shipping. We will need to have 10 orders $104.95 set, that will save you each individual order $25.00. Need to have 10 orders to do group purchase price. Must call 864-915-4637 or email heather@hawksthirdgenparts.com to place order at this special. Special is good until August 31, 2012.

http://www.hawksthirdgenparts.com/pr...%252d1992.html

Thank you!
Heather

BlueZee28

iTrader: (30)

you guys ought to come out with a retro set, I'd be all over that.

Impaqt

iTrader: (1)

any more installed pics? Would like to see some light pattern and/or before and after shots.

1fas92

iTrader: (1)

Hello,
Rocky just bought a set on Monday & got them Friday! Hopefully he will have them installed by today or tomorrow, We should be able to post pics soon........

loneroad

iTrader: (3)

Email sent for 2 sets

1fas92

iTrader: (1)

I am in for 2 sets , I got to get with heather ...

hawksthirdgen

Hey Guys, I am getting closer and closer....those of you wanting to order, you need to send me an email to heather@hawksthirdgenparts.com or call me at 864-915-4637 to get your orders in Let me know what else you want to include in your orders so I can work on your shipping discounts as well!

Thanks,
Heather

Cat Amanigh

You have anything for the high beams, too?? I'm interested but I'd really like to be able to do all four at once.

BlackenedBird

iTrader: (5)

10k is gonna be more blue than white & not very good light output compared to what it could & should be. Drop them down to a 5k (6k at the highest) & you've got a good product.

hawksthirdgen

Hi,
Give Heather a call and place a order and I can get a 5 or 6K for you it will take two weeks longer to get them in s I only have the 10K in stock
Thanks,Bruce
www.hawkshirdgenparts.com

hawksthirdgen

Hi,
You can just order two kits and put them on low and high beam , but it will be SUPER BRIGHT
Thanks,Bruce

BlueZee28

iTrader: (30)

Any chance you guys would make these?

hawksthirdgen

Hi,
YEs email me a pic of the style you are looking for and Iw ill see what Ic an come up with .
Thanks,Bruce

BlueZee28

iTrader: (30)

Sending a PM now!

jas2730

iTrader: (7)

Are these glass or plastic?

hawksthirdgen

Hey Everyone, go ahead and get your orders in, there's about 2 weeks left on this deal. There should be pics coming soon, will post as soon as they are ready. Please do not hesitate to contact me if you have any questions or need any additional information at 864-915-4637 or heather@hawksthirdgenparts.com.

Thanks!

Heather

hawksthirdgen

These are glass. Let me know if you have any other questions.

Heather

BOTTLEDZ28

iTrader: (9)

I would be all over a kit like this is the light output wasnt so blue. I just want a pure white output.

hawksthirdgen

I believe we also can get the more white output bulbs....I am checking on it and will post another reply as soon as I find out. I think they may take a little longer to get.

Thanks,
Heather

AKATDOG

iTrader: (1)

+1

BlackenedBird

iTrader: (5)

Refer back to https://www.thirdgen.org/forums/post...73-post10.html

Cat Amanigh

One other concern comes to mind... There appear to only be two wires on these kits. Correct me if I'm wrong, but aren't the factory low beams a dual filament bulb? How does this affect their behavior for lowbeam vs highbeam use? Do they stay on at normal brightness when the highbeams are on, or do they only work on the lowbeam setting?

hawksthirdgen

The kit comes with an H4 HID bulb, you are correct in saying the factory has 3 wires as it does. When changing over to the HID kit they only use a power and a ground. If you want high beams you simply have to use 2 kits and both will come on at the same time. From experience you should only need the low beams as they are bright enough unless you just want the high beams for the looks.

Thanks, Steven

1fas92

iTrader: (1)

Hello Heather,

When I order my hid light kit from you I will be needing the 5k or 6k white light as well...

Impaqt

iTrader: (1)

Anyone got pics yet?

1fas92

iTrader: (1)

here are some from Rocky Diaz
He got his installed on his camaro last Friday...

1fas92

iTrader: (1)

3 more

BlueZee28

iTrader: (30)

Did you get a chance to check out that PM I sent about getting retros made?

Rockyd

Hey blue I'd like to see what ur asking for just curious. Also the light output is way better than I had yes it was ur yellow from autozone lights. I am very pleased with them as it took me about 15 mins to install them full plug and play and when try are off you couldnt even tell they are aftermarket. Not bad at all for price and I'm going to have to get with Bruce on those brighter bulbs before the darker months come in. Thanks hawks!!!

BlueZee28

iTrader: (30)

Retrofitting is when you take OEM projectors and attach them to a 4x6 housing and use real xenon HID lighting. You get the cutoff also because of the projectors. You woukd typically use the afermarket plastic housings on ebay since you have to cut the back side off and fiberglass the prohectors into them.

hawksthirdgen

I will check on the retrofits again with Bruce. Steven, thank you for the input on the wires.

Everyone, we can get a 6k bulb with a white light and an 8k bulb with more of a blueish light. These take 2-3 weeks to ship but will be at the same price as the Group Purchase price. Let me know when you place your orders which bulb you would prefer.

Let me know if you have any other questions. Call me at 864-915-4637 or email me at heather@hawksthirdgenparts.com.

Thanks,
Heather

hawksthirdgen

I would also like to say THANK YOU TO ROBBIE for posting the pics of Rocky's Car! I really appreciate it!

Heather

loneroad

iTrader: (3)

Personally... I want the blue . It will fit with the "theme" of my car. I built a custom gauge setup with autometer cobalts. And the interior lights are all blue leds. I've been wanting to change headlights for awhile. The dull yellow bulbs just looked out of place.

hawksthirdgen

OK Guys, I got one more order today....getting closer and closer!!

Get me those orders if you want to get the kits soon!

Thanks,
Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on facebook: Hawks Heather

AKATDOG

iTrader: (1)

Cmon guys! Let's get these orders in for an awesome kit!

energycontacts

iTrader: (1)

how many more you need to complete this order?

hawksthirdgen

I need 3-4 sets as of right now. GET THOSE ORDERS IN GUYS (and gals out there) IN THE ORIGINAL THREAD I ADDED 3 THUMBNAIL PICTURES!!!

You have until the 31st to get me the billing info, send an email to heather@hawksthirdgenparts.com or call me at 864-915-4637!

Thanks!
Heather

hawksthirdgen

Just a few more days left!! Those of you that want this deal that have not contacted me to place your order, now is THE TIME!!! Email me or call me ASAP!!! I need these orders to start shipping out----I need my first group purchase to be a success

Thanks,
Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on facebook: Hawks Heather

hawksthirdgen

TOMORROW IS THE LAST DAY!!! GET THOSE ORDERS IN EVERYONE!!!

Thanks!
Heather

hawksthirdgen

Any last takers on this deal???????

Get those orders in!

Thanks,
Heather

MotorMouth

I've been busy and just checked the site to see this. I would like a set of white for low and high beam.

hawksthirdgen

Email me or call me to place your order and I will make it happen

Thanks,
Heather
8t64-915-4637
heather@hawksthirdgenparts.com
Find me on Facebook: Hawks Heather

1fas92

iTrader: (1)

My two set are ordered & paid for ..........

Thanks Heather !

I will REMIND the guys at www.nttga.net on Sunday, We have our monthly meet then !

Scamo-2.8

iTrader: (16)

My order is in, we gotta be close now. Come on guys!

hawksthirdgen

THANKS EVERYONE!! TWO MORE ORDERS IS ALL I NEED!! GET ME THOSE ORDERS, DON'T LET ME DOWN ON MY FIRST GROUP PURCHASE! LETS MAKE IT A SUCCESS


Heather

energycontacts

iTrader: (1)

I will be ordering one set tomorrow. Heather, you might just be successful on the first group purchase. I hope you make the 5" spoiler successful too.

hawksthirdgen

THANK YOU!!!! Please call or email me to place your order! THIS IS AWESOME!!! Now if you were ordering two sets, that would be even better

Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on Facebook: Hawks Heather

Scamo-2.8

iTrader: (16)

Hey Heather, what's the status of this GP?

hawksthirdgen

All the orders began shipping this week to the purchases that were invoiced and paid for

Heather
heather@hawksthirdgenparts.com
864-915-4637

RS Reaper

Would like to see some pictures of the light pattern. While they look nice so were, for the most part, the H4 conversion you see on ebay, but they pretty much sucked as headlights. Also would like to see if they are going to be blinding the on coming traffic like a lot of the ricers around town do. Overall I need performance headlights not show lights.

I would like to see Hawks make the retro headlight with projector like BlueZee28 was talking about. I would see the projector better distributing the HID higher output of light then the simple housing.

Last question is for Hawks, Are these legal on the road? I'm not going to get a pair and see "Off roading only" stamped across them, am I?