hawksthirdgen

REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED REPOSTED


Now offering a group purchase for 5" Camaro Fiberglass Rear Spoiler. This is for model years 82-86 and 91-92. The price is $299.00 per spoiler WITH FREE SHIPPING to the continental United States. Please call or email for shipping quotes outside the continental US. These go fast and are VERY popular! This deal is good until JUNE 30th, 2013. We need 10 orders to get the deal! GET THOSE ORDERS IN!!

http://www.hawksthirdgenparts.com/pr...r-Spoiler.html


Please call or email me to place your orders! Add in other parts and get discounted shipping!

Thanks,
Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on facebook: Hawks Heather

Orr89RocZ

iTrader: (20)

In for one. Need 9 more

energycontacts

iTrader: (1)

Hawks, cant you do a little better on the price? I think if you offered it for $250 plus free shipping, more people would be in. I doubt 10 people would order for just free shipping. I might be wrong. I will definetly wait on this part until.... if anything, changes.

tonys91rs

iTrader: (17)

I would consider $250.00 as well.

hawksthirdgen

This is a very labor intensive part and we have kept our price from going up to $350.00 for quite some time now. We have tried to stay competitive at the $299.00 price. The free shipping alone saves a good bit......

Thank you for the thoughts and they will be taken into consideration. I take the suggestions seriously.

If you have any questions or need anything else, please do not hesitate to let me know.

Thanks,
Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on Facebook: Hawks Heather

energycontacts

iTrader: (1)

This is the only group purchase that seems like it could get serious and meet the quota. Let's lower the price to $250, you know there is at least 3 that would be interested. How much can shipping be anyways? This is not that large wrap around spoiler, probably be able to pack these in a large cylinder poster container.

UnderCover89TBI

iTrader: (25)

I am deffinately in for 250.00 w/ free shipping...make it happen hawks! show us how great you are!

BumpaD82

I dunno if the price will change though

~DaVe

energycontacts

iTrader: (1)

potentially 5 so far. can we get any more member to chime in?

FSTFBDY

iTrader: (33)

Can I buy just the center section? Id be interested if so. I have a vert and would need to modify my side caps. No big deal. Just dont want to buy a setup when id just be tossing the end caps out anyways.

jersyboyy

iTrader: (8)

Im IN!! Let me know if this goes through iv been DIEING for a 5" spoiler deal!


Oh I thought it was for $250. Ill def be in for 250, not to sure at 299

mygta87

iTrader: (4)

250 here as well

energycontacts

iTrader: (1)

thats 6....maybe 7 so far.

hawksthirdgen

The price of $299.00 with the free shipping is the best that we can do. This spoiler is VERY labor intensive. It is physically made to the back of a camaro, and takes longer to make than the hoods we currently retail for $500. We have not risen the price of these to keep them selling good and keeping the fiberglass company busy with orders. We also want to stay competitive. We have never offered free shipping on these, which saves on average about $45. You can get other items shipped in the massive box and save on shipping that way....I will definitely help out and do better on pricing when I can...but this product we are already cutting down to the nuts and bolts. Let me know if I can help with any other questions. We may not be offering another group purchase on these, so get it while you can

Thanks,
Heather

hawksthirdgen

It is one whole piece

Heather

Orr89RocZ

iTrader: (20)

Come on fellas saving on shipping is still a deal.

hotrodjames

I would buy one also. will these fit an 89 iroc? why isnt 89 listed?

Orr89RocZ

iTrader: (20)

It doesnt have the third brake light which 89's have in the trunk lid spoiler. Not sure if you can adapt it or not

energycontacts

iTrader: (1)

assume the order doesnt meet the 10 minimum, will the ones that order anyways get free shipping?

hawksthirdgen

We will get the 10 orders It may not be as soon as you would like, but we will get them.

Heather

FSTFBDY

iTrader: (33)

How can it be one whole piece? the hatch wouldnt open if so.
Or do you just mean No sorry you cant buy just a center because your fiberglass manufacture wont do it that way?

hawksthirdgen

What my response should have said is that we will not sell the one center piece by itself. It is sold all together. I am sorry for the confusion.

Heather

trafficlightguy

I will go in for 250.00 plus free shipping

hotrodjames

Hawks, will this fit an 89 iroc? I dont need the third brakelight let me know thanks

hawksthirdgen

It will fit, but the holes in the hatch are different. To get it to fit, you will have to drill new holes and fill some in.

Let me know if you have any other questions.

Thanks,
Heather

energycontacts

iTrader: (1)

the holes are different? does that mean drilling into the read deck lid? i didnt know this, not really wanting to drill. cant these be made to fit 87-90 irocs since they are all custom made? not interested if it has that much work involved to get them to work.

hawksthirdgen

Bruce explained this to me and I get the idea, I am not exactly sure how to relay this in a message to come across clear enough to where you get the idea. If you make a 5" spoiler to fit a 3rd brake light it will be very fat at the base and not normal looking for the car. It might be a good idea to call the shop and speak to either Kyle, Steven or Bruce to get the whole idea...being as how I have not physically put one on myself, I have just seen them on the cars.
The number for the shop is 864-855-2694.

Sorry I do not have the technical expertise on this.

Heather

energycontacts

iTrader: (1)

not really concerned about the third brake light, i understand that your spoiler was not meant for cars that has the third brake light in the spoiler. i thought all the deck lids had the same holes drilled from the factory, with the exception of an extra hole for the years that had the third brake light for the wires to run thru. can you just verify this for me?

hawksthirdgen

I am checking for you

Heather

UnderCover89TBI

iTrader: (25)

anyway I am deffinately in.

87CIZ

iTrader: (8)

You have to drill new holes for it to fit. the side pieces you can egg out if i remember right, but the middle is different.

Maybe we could all meet in the middle at $275? I know Bruce said $300 and everyone else is saying $250. Maybe?

87CIZ

iTrader: (8)

The spoiler sides and center piece have different locations for holes. The 87-90 is physically taller than the other years due to the third brake light. I bought a notchback and tried to put my spoiler on it, but couldn't due to hole locations. It was drilled for up to 86 and 91-92 rs's

hawksthirdgen

The holes are different in the quarter panels and the deck lid.

Heather

energycontacts

iTrader: (1)

looks like im out since it wont fit my 1990. heather, why dont you start designing this spoiler for 87-90 with an integrated led third brake light? make it affordable and as a group purchase since no one that has an 87-90 car has one. good thing i never purchased the one you make now, glad i found out the easy way.

UnderCover89TBI

iTrader: (25)

I know people who have bought one. You have to slightly elongate the holes on your deck lid to mount it they say.

hawksthirdgen

Hey Everyone! We have looked into making them for the 87-90 models and the cost and labor involved for the mold process far outweighs the demand...at this point.....

If anyone is serious about ordering, please call me or email me as soon as possible to get the orders in and placed so I can tally up the serious buyers to know how many I have for the group purchase. I appreciate everyone's feedback....but I need the orders to know where I stand on the group purchase.

Thanks,
Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on facebook: Hawks Heather

gbeaird

iTrader: (1)

I'm in! This will probably go on our B4C when we restore it.

It sounded like I was No. 6, or so. Get your orders in!!!!

jersyboyy

iTrader: (8)

Just my two cents not bashing or trying to start drama BUT
Bro its tough times and as a group purchase of 10 or more youd think more than a shipping discount would be waved around. Its $19.45 to ship to my door on hawksthirdgen. Just saying if your trying to entice a mass order to pull in some big revenue of an item that probably isnt being sold left and right you might want to make it a DEAL.

hawksthirdgen

Thank you for the opinion.....Not everyone is as lucky to have such inexpensive shipping. Most of the time, the size of the box alone makes it more expensive and shipping is usually around $40 to $45.

Thank you everyone for all the feedback

Heather

hawksthirdgen

I will be extending this group purchase through the end of October 2012. Get your orders in now!

Heather
864-915-4637
heather@hawksthirdgenparts.com
Find me on Facebook: Hawks Heather

BumpaD82

I'm still tryin to wrap my head around $299 instead of $250 ... But I'm getting closer

~DaVe

project89

iTrader: (1)

id love to buy one but money is tight atm.

for those who want to put one of these on a car that is not listed (87-90) for i can supply u pics of the necasary mods needed to mount this on ur car.

iirc i had to drill 2/3 new holes in the decklid and i was able to file the holes for the side pieces

now i didnt install a 5inch spoiler but i did go from the factory spoiler which had the brakelight to the one without it , which is what these 5 inch spoilers bolt onto so the mods will be identical

gbeaird

iTrader: (1)

Yep. Should have started this one off as '$350 and free shipping, saving you about $45-$50'. Then when everyone moaned about the $350 price, saying they could do $300, this would be a done deal.

Gene Beaird,
Pearland, Texas
85 C Prepared Firebird,
92 B4C 1LE ex-TxDPS Camaro

jersyboyy

iTrader: (8)

You missing a few screws or are they just loose? Regular price is $300 bumping that up $50 bucks just to offer free shipping as an insentive is shady as ****. Really guy??

Orr89RocZ

iTrader: (20)

Regardless you are either in or out at the current offer. 250-275 would be awesome but doesnt seem like its gonna happen. 299 with free ship still seems justified considering the size of the spoiler and fabrication involved. I wouldnt expect shipping to be under 20 dollars. I dont know the weight however but a delicate glass object needs sturdy packaging and id pay to make sure its delivered in proper shape. Delivery companies are not easy on parts. I have seen alot of beat up packages over the years. Some things do go thru rough transit.
If its 30 or so bucks shipping, then at 10 orders hawks is giving up 300 bucks in costs. They probably arent making that much per order considering the labor process.

I think the above made the point but used wrong pricing. It should have been priced at 250+ shipping and end up costing 300 anyway just like current offer of 300 with free ship. that likely would have fooled more ppl

gbeaird

iTrader: (1)

List price shows on their web site as $350, I assumed that was before the group purchase was announced. I've dealt with Hawk's ThirdGen on several occasions, and find them to be a very good bunch of folks to work with. Top notch and on the level.

Thank you for suggesting I'd recommend something shady without really knowing me.

But I'm still in, and hoping this goes successfully!

hawksthirdgen

List price is normally $350 but we have it for $299 on the site PLUS shipping. I am offering it for $299 WITH FREE SHIPPING

Heather

hawksthirdgen

ALSO, I wanted to let you know that the group purchase specials are only good on the sites that I post them on, for the members of these sites. It is not for the everyday consumer buying from the website I will offer better deals than what is on the website, and you can order directly from me with any purchases you may have.



Heather

white1991rs

I think you would sell a lot more if you lowered the price, these spoilers look great and I would really like one but not at 300 bones. Anyone who installs this has to pay for it to be painted to match which you can count on being like 100 so you would end up paying around 400 dollars which seems pretty steep for an extra 2-3 inches of spoiler .

UnderCover89TBI

iTrader: (25)

If you don't wanna pay for it. Don't buy it. Just that simple.