[MA] 5-speed shifter console + rear interior plastic
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
5-speed shifter console + rear interior plastic
I am looking for a good shape rear interior plastic in black. If you have other colors let me know I don't have a problem painting. I am also looking for a rear carpet. Black as well.
Finally I am looking a 5-speed shifter console piece. The one that goes around the shifter and has the 5 speed track emblem.
Hope someone out there has all this stuff.
Thanks.
Finally I am looking a 5-speed shifter console piece. The one that goes around the shifter and has the 5 speed track emblem.
Hope someone out there has all this stuff.
Thanks.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 5-speed shifter console + rear interior plastic
How much of the rear plastics do you need Dennis ? Just the PPD Hatch cover ?? Just the cargo area......or the back seat area plastics too ? I've got a black rear carpet but I'm pretty sure it's got T-Top bracket holes in it. ( I'll look )
I've got a T5 Bezel too but I want big $ for mine. ( last one I got ) Your better off seing what other members have available before considering mine !
Re-Post with exactly what plastics you need. I'll check into that carpet.......
I've got a T5 Bezel too but I want big $ for mine. ( last one I got ) Your better off seing what other members have available before considering mine !
Re-Post with exactly what plastics you need. I'll check into that carpet.......
Member
Joined: Jul 2003
Posts: 141
Likes: 0
From: sw michigan
Car: 90 gta
Engine: 5.slow turbo
Transmission: tremec tko
Re: 5-speed shifter console + rear interior plastic
i have some the rear 1/4 panel/B-pilar plastic and a couple other pieces, i don't see the rear trunk well piece though.
let me know
jim
let me know
jim
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
I need the three pieces that make up the trunk rear plastic. I also need the rear carpet. If the holes are on the horisontal part, I don't care. If they are on any of the vertical parts I do care. As for the center console, how much we talking? I am looking to spend like $20. Probably way under what you want for that.
I don't need B-pillar or anything else. If you guys don't have black I am ok with any color as I will be painting it and covering it with fabric anyways.
Thanks for the interest.
I don't need B-pillar or anything else. If you guys don't have black I am ok with any color as I will be painting it and covering it with fabric anyways.
Thanks for the interest.
Re: 5-speed shifter console + rear interior plastic
Hey Dennis,
I have a complete interior plastic panels in red in very good condition from a '91 with T-Tops, the only thing is you would have to get a new storage box, the one that was with the panel was all moldy and crap and you would need to put a new key lock on it, I never had the key for the lock. let me know, if your interested I send some pic's and we can discuss price and shipping.
Chris
I have a complete interior plastic panels in red in very good condition from a '91 with T-Tops, the only thing is you would have to get a new storage box, the one that was with the panel was all moldy and crap and you would need to put a new key lock on it, I never had the key for the lock. let me know, if your interested I send some pic's and we can discuss price and shipping.
Chris
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
Sounds great. I don't care about the box or the lock. I am covering it all in black fabric anyways. Can you post pics? Or send them to bernal.dennis@gmail.com
Thanks.
Thanks.
Supreme Member
iTrader: (10)
Joined: Oct 2007
Posts: 1,881
Likes: 2
From: Fl.
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: 5-speed shifter console + rear interior plastic
I have 2 5-speed shift plates if your interested, I will take pics.
Trending Topics
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
please take pics. I am interested!!!
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: 5-speed shifter console + rear interior plastic
Still looking for interior plastics? I've got a whole set in nice condition. Black. $25-75 each depending on which pieces you need.
Lock box and fiberboard in good shape!
Let me know if you're interested and I'll take some pics and we can talk about shipping.
Lock box and fiberboard in good shape!
Let me know if you're interested and I'll take some pics and we can talk about shipping.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
Yes I am still looking but I am NOT, NOT NOT looking for stuff in good shape. I know this is a strange request, but I don't want good stuff. I am covering it all in fabric so I could care less if it has scratches on it, and I definetly don't need the locking cover thing to work at all. I don't even need it to have a lock in the hole. I will never be opening it.
Due to this reason is why I am looking to spend like $20-30 on it all since I don't care about condition. I am also looking for A-Pillar plastics now too, but same deal, NOT nice at all. Just need all mounting tabs.
I may just need to go to a junkyard myself to pick up crap since no one will want to deal with the hastle of shipping something this big that is not raking in some real $$$.
Due to this reason is why I am looking to spend like $20-30 on it all since I don't care about condition. I am also looking for A-Pillar plastics now too, but same deal, NOT nice at all. Just need all mounting tabs.
I may just need to go to a junkyard myself to pick up crap since no one will want to deal with the hastle of shipping something this big that is not raking in some real $$$.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 5-speed shifter console + rear interior plastic
The only 2 panels that 'fit the bill' are the long one running down the rear drivers side, and the spare tire cover. Take the ride to RI and you can have them. ( from an 82-88 non-shoulder belt car )
There are no cracks or broken spots,..... they had gotten sun bleached and started to dry-rot a little. There is also some type of stain on the long one. I tried to clean them up but they are not good enough to re-use without being prepped first.
I could also offer Ya' a tan rear hatch trim panel for PPD cars. It's a regular hatch trim and not made for a locking storage cover. That's in pretty good shape and I'd want $25 for it. The same is true for a pass side speaker cover,...... I've got a spare blue one from an 84 TA, good shape, has carpet, $20.
Even if you don't want the PPD cover, the pass side speaker cover,....... the tan drivers side speaker cover and spare tire cover are still here for the taking.
There are no cracks or broken spots,..... they had gotten sun bleached and started to dry-rot a little. There is also some type of stain on the long one. I tried to clean them up but they are not good enough to re-use without being prepped first.
I could also offer Ya' a tan rear hatch trim panel for PPD cars. It's a regular hatch trim and not made for a locking storage cover. That's in pretty good shape and I'd want $25 for it. The same is true for a pass side speaker cover,...... I've got a spare blue one from an 84 TA, good shape, has carpet, $20.
Even if you don't want the PPD cover, the pass side speaker cover,....... the tan drivers side speaker cover and spare tire cover are still here for the taking.
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: 5-speed shifter console + rear interior plastic
Yeah, dude I competely understand. Good luck finding what you're looking for, but I'd hate to see the plastic I'm sitting on just get covered.
Yes I am still looking but I am NOT, NOT NOT looking for stuff in good shape. I know this is a strange request, but I don't want good stuff. I am covering it all in fabric so I could care less if it has scratches on it, and I definetly don't need the locking cover thing to work at all. I don't even need it to have a lock in the hole. I will never be opening it.
Due to this reason is why I am looking to spend like $20-30 on it all since I don't care about condition. I am also looking for A-Pillar plastics now too, but same deal, NOT nice at all. Just need all mounting tabs.
I may just need to go to a junkyard myself to pick up crap since no one will want to deal with the hastle of shipping something this big that is not raking in some real $$$.
Due to this reason is why I am looking to spend like $20-30 on it all since I don't care about condition. I am also looking for A-Pillar plastics now too, but same deal, NOT nice at all. Just need all mounting tabs.
I may just need to go to a junkyard myself to pick up crap since no one will want to deal with the hastle of shipping something this big that is not raking in some real $$$.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
Totally understand.
Jon from RI, I may need to come down and see what you are talking about. Any chance you can post pics? I am near Boston so I am not that far away, but saving a drive would be great.
Jon from RI, I may need to come down and see what you are talking about. Any chance you can post pics? I am near Boston so I am not that far away, but saving a drive would be great.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 5-speed shifter console + rear interior plastic
Here are the free ones:





A tan rear hatch trim: ( This MIGHT NOT BE THE RIGHT ONE..... ! )

Here is the Blue pass side Hatch trim:

By picking up the freebies ( mainly the drivers side trim panel ) at least you wouldn't need to deal with shipping the largest of the interior panels.





A tan rear hatch trim: ( This MIGHT NOT BE THE RIGHT ONE..... ! )

Here is the Blue pass side Hatch trim:

By picking up the freebies ( mainly the drivers side trim panel ) at least you wouldn't need to deal with shipping the largest of the interior panels.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
Very true. I am thinking I might take those off your hands. Also do you happen to have any A-pillar plastics? Same deal as the rears, just need the piece to have all tabs but color or condition are not important.
If you don't, thats cool I may just try and fix what I have with super glue and metal tabs.
If you don't, thats cool I may just try and fix what I have with super glue and metal tabs.
Member
iTrader: (2)
Joined: Mar 2009
Posts: 148
Likes: 0
From: Detroit, Michigan
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: 5-speed shifter console + rear interior plastic
Very true. I am thinking I might take those off your hands. Also do you happen to have any A-pillar plastics? Same deal as the rears, just need the piece to have all tabs but color or condition are not important.
If you don't, thats cool I may just try and fix what I have with super glue and metal tabs.
If you don't, thats cool I may just try and fix what I have with super glue and metal tabs.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
True. But my car is a hardtop. Sorry. If you had hardtop ones at that price I would jump right on it.
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
Nice. Post pics and we can't talk about price.
Senior Member
Joined: Apr 2009
Posts: 554
Likes: 0
From: montreal-canada
Car: 1985 camaro Z/28
Engine: 305 V/8 4bbl carb
Transmission: T5 WC
Axle/Gears: 3-23 posi with 4 wheel discs
Re: 5-speed shifter console + rear interior plastic
pm me, with your e-mail adress if still interested...
Thread Starter
Joined: Feb 2005
Posts: 4,506
Likes: 92
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: 5-speed shifter console + rear interior plastic
John in RI - Can we set something up for this weekend in terms of pickup???? I am free if you are, Sat works best for me.
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 5-speed shifter console + rear interior plastic
Sure,
Sat morning / afternoon would be best. Send me a PM !
Sat morning / afternoon would be best. Send me a PM !
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: 5-speed shifter console + rear interior plastic
I have hard top pieces for around the windshield if John doesn't have any. Let me know, will have to check on shipping for you, just need a zip code unless you wanna drive all over the north east, lol.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM










