ABS plastic headliners
Thread Starter
Member
Joined: Jul 2006
Posts: 452
Likes: 0
From: West Palm Beach, FL
Car: 1986 Pontiac Firebird S/E
Engine: 305 carb'd V8
Transmission: 4-speed auto
Axle/Gears: Stock
ABS plastic headliners
Has anyone replaced the old piece of crap headliner with one of the new plastic colored ones that only require cutting out the hole for the courtesy lamp?
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
there's been at least 10 that I know of on the boards that have swapped to the abs headliner. do a search. https://www.thirdgen.org/forums/sear...earchid=200589
https://www.thirdgen.org/forums/body...=abs+headliner
https://www.thirdgen.org/forums/body...=abs+headliner
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Originally Posted by 87CIZ
there's been at least 10 that I know of on the boards that have swapped to the abs headliner. do a search. https://www.thirdgen.org/forums/sear...earchid=200589
https://www.thirdgen.org/forums/body...=abs+headliner
https://www.thirdgen.org/forums/body...=abs+headliner
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
haha i know just so nice of me, I just feel like an *** when me/someone else jumps in to a common question with SEARCH. So depending on my mood i'll run a search to help... I was a lurker so long no one had to tell me to search, but low and behold someone nailed me on it the other day.
Senior Member
Joined: May 2006
Posts: 581
Likes: 0
From: Minnesota
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio
I put the ABS plastic headliner in my car and that was my thread above. I realy like it alot and its real sturdy. check out the pics in my cardomain, in my sig and ts on the 2nd page.
Last edited by 83camaroMN; Jul 30, 2006 at 09:45 PM.
Senior Member
Joined: May 2006
Posts: 581
Likes: 0
From: Minnesota
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio
Also if you read the thread above you will run into a dome light fit issue but can be fixed real easy.
Trending Topics
Member
iTrader: (10)
Joined: Jun 2002
Posts: 270
Likes: 0
From: Taylors Falls, Minnesota
Car: 1983 Z/28
Engine: Edelbrock 355
Transmission: T-56
Axle/Gears: 3.42/Zexel/PBR
Whats the dome light issue? I installed an ABS headliner a few years ago with no problems. Hey, I also have an 83 and i'm in minnesota!
Senior Member
Joined: May 2006
Posts: 581
Likes: 0
From: Minnesota
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio
Originally Posted by livewire
Whats the dome light issue? I installed an ABS headliner a few years ago with no problems. Hey, I also have an 83 and i'm in minnesota! 
Senior Member
Joined: Mar 2005
Posts: 992
Likes: 1
From: Sacramento, California
Car: 92 RS
Engine: a slow one
Transmission: a crunchy one
Axle/Gears: a whiny one
im glad i aint the only one running around with a backwards dome light, lol
dont bother me none, i have lights on my mirror, and the rear seat needed a little more illumination haha
however
the fabric on the one i got from hawks is pretty crappy
its been in for about six months, and the top edges are already faded to grey from black, and they feel like they want to deteriorate already
at least its ABS and i can always recover it without much work though
dont bother me none, i have lights on my mirror, and the rear seat needed a little more illumination haha
however
the fabric on the one i got from hawks is pretty crappy
its been in for about six months, and the top edges are already faded to grey from black, and they feel like they want to deteriorate already
at least its ABS and i can always recover it without much work though
Senior Member
Joined: May 2006
Posts: 581
Likes: 0
From: Minnesota
Car: 1998 Mustang
Engine: 3.8L V6
Transmission: Automatic with overdrive
Axle/Gears: 2.73:1 axle ratio
Originally Posted by Dizturbed One
im glad i aint the only one running around with a backwards dome light, lol
dont bother me none, i have lights on my mirror, and the rear seat needed a little more illumination haha
however
the fabric on the one i got from hawks is pretty crappy
its been in for about six months, and the top edges are already faded to grey from black, and they feel like they want to deteriorate already
at least its ABS and i can always recover it without much work though
dont bother me none, i have lights on my mirror, and the rear seat needed a little more illumination haha
however
the fabric on the one i got from hawks is pretty crappy
its been in for about six months, and the top edges are already faded to grey from black, and they feel like they want to deteriorate already
at least its ABS and i can always recover it without much work though
Senior Member
Joined: Mar 2005
Posts: 992
Likes: 1
From: Sacramento, California
Car: 92 RS
Engine: a slow one
Transmission: a crunchy one
Axle/Gears: a whiny one
Originally Posted by 83camaroMN
LOL the dome light dont bother me ethier, the floor lights light most of the front of the car up. I have had mine for about 2 months no probs yet. Only think I see is some kind of black glue on the corner of my headliner but that came off the car.
i wondered if Camaro's had floor lights too
my brothers 86 Firebird also had them, and I was jealous
now i have to crawl down there and see if my bulbs are blown or if it's just the fuse
Thread
Thread Starter
Forum
Replies
Last Post
MrPackstin
Interior Parts for Sale
11
Oct 25, 2017 08:09 PM
formula00ra
Interior Parts Wanted
1
Sep 28, 2015 11:50 AM






