Steering wheel pics
Thread Starter
Member
iTrader: (3)
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Steering wheel pics
Post up some pics of your steering wheel installed. Aftermarket or whatever. Anybody got a cavalier or other gm wheel in their third gen? I want a different steering wheel, but can't decide what I want. Need some pics to help me out!
Thread Starter
Member
iTrader: (3)
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
also, before everyone screams to do a search, I HAVE, many pics only come as red x's, so I am asking for newer pics or links.
Joined: Sep 2002
Posts: 3,685
Likes: 10
From: PA
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
I used one of those cheapie Pilot steering wheels that I got while working at Autozone.
I replaced the stupid PILOT center button...with one that I "made".
Ive had that wheel on there for close to 5 years now. Its just now starting to show wear. Im thinking...5 years, for the price I cant complain. I might just get another wheel, and slap it on there.
Anyway here are a couple pics. The one from further back sucks because the wheel is turned a lot.



Had the wheel for around 5 years... but here is the thread from 04 when I did the horn button mod.. Pics still work...its a miracle.
https://www.thirdgen.org/forums/body...termarket.html
Justin
I replaced the stupid PILOT center button...with one that I "made".
Ive had that wheel on there for close to 5 years now. Its just now starting to show wear. Im thinking...5 years, for the price I cant complain. I might just get another wheel, and slap it on there.
Anyway here are a couple pics. The one from further back sucks because the wheel is turned a lot.



Had the wheel for around 5 years... but here is the thread from 04 when I did the horn button mod.. Pics still work...its a miracle.
https://www.thirdgen.org/forums/body...termarket.html
Justin
Here's a steering wheel of a 90-94 Lumina Z34 that I put into a 87 Iroc-Z I built for a friend once, it was a direct bolt on.

And a 3 Spoke wheel off a 87 Firebird I used to replace my ugly factory Air Bag wheel on my Formula.

And a 3 Spoke wheel off a 87 Firebird I used to replace my ugly factory Air Bag wheel on my Formula.
Thread Starter
Member
iTrader: (3)
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Thanks for the pics everyone. I was considering the lumina or cavalier wheel. I put a 4 spoke from a 91ish silverado that I had laying in the shop and it works pretty good. I will have to get a pic posted when I can.
Thread
Thread Starter
Forum
Replies
Last Post
backtothe80s
Suspension and Chassis
33
Sep 5, 2015 12:39 AM






