after you get that little bugger out how do you get the **** off ? it was hard enough getting the clip out , **** dont wanna budge

 

should just pull straight up and off...

 

kk then little more elbow grease it is

well if i bust something b&m getting ordered =)

 

Take the clip out and it should slide off. Mine is loose (dk why) and it wiggles back and forth...
If its stuck, try twisting it a bit while pulling up on it.

 

yea i dont know whats up with it but man this little guy dont wanna come off , i am gonna drive it to my friends garage and use one of his tools it will like catch under the lip of the shift know and will help me pop it off

 

Did the clip come out whole? maybe a piece is still in there. Will it wiggle around?

 

it came out whole the little bastard still dont wanna let go tho i am gonna let my buddy mess with it before i break it off

 

Maybe a prev owner glued it on or something. Or maybe it "melted" itself to the shifter somehow.......just a wild guess.

 

I've never once had an issue getting the skift ***** off any of my cars. strange...killerklown may be right....maybe someone glued it...

 

Speaking of shifter *****, where can I get a new or mint cond. shifter **** and E brake handle.

Grey

 

Leather e-brake handles have been unavailable for years. It's doubtful you ever find a new one again. Even used, you'll be lucky to find a nice one, let alone 'mint.' But you might get lucky at a junkyard and find a decent one. Or someone who might have one is Tom at www.houseofcamaro.com

The plastic ones are still available though.

Whereas, new shifter *****, both leather and plastic, auto and manual, are still available. I'd guess there are a few sources, but one is site sponsor, Modern Day Muscle:

http://www.moderndaymuscle.com/interior4?start=20

***** are on this page ^, and e-brake handles are on the 'next' page.

 

It's doubtful you ever find a new one again. Even used, you'll be lucky to find a nice one, let alone 'mint.' But you might get lucky at a junkyard and find a decent one.


i have to agree junkyard or you might get lucky on ebay as well

 

where can i get a new clip??? i seem to have lost mine....

 

on a side note i finaly got the thing off , i took off my t tops stood on my seat and pulled with all my might , my face got red i was pulling with so much force the little buggy finaly let go

i seen to signs of glue but god damn , it must of had something on there

 

good to hear it finally came off. wonder why it was glued on...

 

You know, hammer or a blunt object or a punch for that matter works really well. (this time I am not joking).

Sometimes these things just need a bit of "persuasion" from a blunt force.

 

i dont know what there called , but you know how you have a dent you can weld on a bar and a sliding hammer can go on it to help pull it out for paint prep , well i used something like that and it still wouldnt come off of it

i mean it was insanly stuck but its off now and new consoles going in this friday