ok i have a 92 camaro no power any thing in it. Im about to get a set of doors how hard is it two add power windows ? useing all the oem stuff its 87 or maybe a 88 with a 2.8 v6. and how much wait will it add ? and how hard would it be to add the power locks two my car is 3180 with me in it it dont need alot more wait thanks for any info.

 

ck. SPAL website . they have kits for windows & door locks . i have both on my car . i'm happy , good luck . weight for both full kits , less than a 6 pack .

 

You'll need to research wiring diagrams to see exactly what you're going to have to add, and where. If you want factory controls, you're going to have to either cut up your console or find a piece from a factory power optioned car. Relay/wiring will be the difficult part depending on your ability, the project won't be that bad as long as you get a set of doors with functioning power options.

 

i have a full parts car to pick from hints why im willing to try and do it

 

any one help?

 

If you have a complete parts car with everything that you need, I don't think anybody could give you any better advice than to just swap all of the parts into your car.

 

I am pretty sure the harness is separate in the car from the main harness. Separate it out, see how it is installed, and remove it. Then put it in your car, along with the doors and switches. You have the best help available - a car that you can take apart to see how everything works.