Help need a steering column for 1984 Z28
Thread Starter
Junior Member
Joined: Aug 2012
Posts: 3
Likes: 0
From: Payson,AZ
Car: 1984 Z28 H.O.
Engine: L69 w/ Q-jet
Transmission: 700R4
Axle/Gears: not sure
Help need a steering column for 1984 Z28
My car was stolen and fortunately the police were able to recover it with little damage. unfortunately the stupid tweeker ripped apart the lock tumbler and cage setup as well as ripping a couple wires out. The cruise doesnt work anymore neither do the brights. I need to know if the G vin code is going to be an inhibitor because of the L69 motor auto tranny. Is there any one who knows what years I can use or who might have one available. Thanks a lot guys this car is my life.
Junior Member
Joined: Oct 2006
Posts: 81
Likes: 0
From: elbridge new york
Car: 1988 gta carbed 383
Engine: small block 4bbl
Transmission: 700r4
Axle/Gears: 3.27 g80
Re: Help need a steering column for 1984 Z28
My car was stolen and fortunately the police were able to recover it with little damage. unfortunately the stupid tweeker ripped apart the lock tumbler and cage setup as well as ripping a couple wires out. The cruise doesnt work anymore neither do the brights. I need to know if the G vin code is going to be an inhibitor because of the L69 motor auto tranny. Is there any one who knows what years I can use or who might have one available. Thanks a lot guys this car is my life.
Thread Starter
Junior Member
Joined: Aug 2012
Posts: 3
Likes: 0
From: Payson,AZ
Car: 1984 Z28 H.O.
Engine: L69 w/ Q-jet
Transmission: 700R4
Axle/Gears: not sure
Re: Help need a steering column for 1984 Z28
[quote=andy74;5558193]I have one,from an 84 z,key broke off in the ignition switch,but a good tilt column, pm me and we can figure something out.
I am interested as long as it is in good enough shape to rebuild. Let me know and ill give my info to you.
I am interested as long as it is in good enough shape to rebuild. Let me know and ill give my info to you.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
0
Sep 2, 2015 01:35 PM




