camaro material
Thread Starter
Member
Joined: Feb 2006
Posts: 186
Likes: 1
From: blairsville Ga
Car: 89 iroc
Engine: 355tpi
Transmission: jasper 700r4
Axle/Gears: 4.11 lsd
camaro material
me and my dad have our own upholstery business and im about to recover my seats but I cannot find the material I want. I have a picture here of the original Camaro logo material I would like to use. if anyone could help me find about 4-5 yards of the black and silver material that would be awesome
Banned
Joined: Dec 2007
Posts: 122
Likes: 0
From: Auburn, ME
Car: "Nina" 1988 Trans Am GTA
Engine: TPI 305 V8
Transmission: T-5
Re: camaro material
I've heard a few folks mention on here that they bought several yards of the "camaro" text fabric but this was before it was discontinued...I'd try a search on here or post up on the wanted classifieds and see if anyone might have some leads.
Good Luck!
-Jack
Good Luck!
-Jack
Joined: Nov 2010
Posts: 5,892
Likes: 84
From: Mantua NJ
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: camaro material
You can contact this co .http://www.puiinteriors.com/.don't know if they have what you need,but they do make upholstery kits for 3rd gen F bodies.
They do not sell to the public,they could send you in the right direction though.
They do not sell to the public,they could send you in the right direction though.
Joined: May 2012
Posts: 300
Likes: 18
From: Laurel, MT
Car: 1984 Z28 HO
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73
Re: camaro material
https://www.thirdgen.org/forums/inte...o-contour.html
I paid $300 for 3 yds and shipping. Had this posted after the fact on our thread.
"Not to make you feel bad, but eBay seller ROHNAZ sells the interior fabric for about $125 for the same size piece that you have. I have the grey/black and also the brown/tan. I will be getting the blue when I see it next."
I did not understand when I ordered it, but you just order the lettering and then you have to purchase the side material. I think the thread above (going from my poor memory) mentions 3 yds is plenty to do seats and door panels.
Our thread if interested https://www.thirdgen.org/forums/memb...amaro-z28.html
I paid $300 for 3 yds and shipping. Had this posted after the fact on our thread.
"Not to make you feel bad, but eBay seller ROHNAZ sells the interior fabric for about $125 for the same size piece that you have. I have the grey/black and also the brown/tan. I will be getting the blue when I see it next."
I did not understand when I ordered it, but you just order the lettering and then you have to purchase the side material. I think the thread above (going from my poor memory) mentions 3 yds is plenty to do seats and door panels.
Our thread if interested https://www.thirdgen.org/forums/memb...amaro-z28.html
Last edited by dlinger; Jul 24, 2013 at 12:33 PM.
Joined: Nov 2010
Posts: 5,892
Likes: 84
From: Mantua NJ
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: camaro material
http://berlinetta.info/forsale/ClothRedDeluxe.JPG
http://berlinetta.info/seats.htm
http://www.ebay.com/itm/NOS-Camaro-R...-/390618568467
http://berlinetta.info/seats.htm
http://www.ebay.com/itm/NOS-Camaro-R...-/390618568467
Last edited by mantaguy; Jul 24, 2013 at 02:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Black89TA
Exterior Parts for Sale
9
Jul 23, 2016 10:42 AM










