Those With 4th Gen Center Consoles
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2012
Location: Tucson, AZ
Posts: 808
Likes: 0
Received 4 Likes
on
2 Posts
Car: 88 GTA Notchback
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: don't know
Those With 4th Gen Center Consoles
I have had my 4th gen console in for awhile. I did the Ford Taurus window switch conversion, that solved that issue. but what about the mirror switch? For a long time I just had it turned sideways in the front little cubby.
like so
Even though it was almost a perfect fit, it was just a little bit to big and the switch would fall out and look terrible.
So, on to the design table. I made an adapter plate that fits in the cubby and keeps the switch secure. (It is so secure if I ever need to remove it, it will probably need to be cut out.)
Just putting this out there as an option for the mirror switch placement. What you think?
This was my final test fit piece, the currently installed piece is black.
like so
Even though it was almost a perfect fit, it was just a little bit to big and the switch would fall out and look terrible.
So, on to the design table. I made an adapter plate that fits in the cubby and keeps the switch secure. (It is so secure if I ever need to remove it, it will probably need to be cut out.)
Just putting this out there as an option for the mirror switch placement. What you think?
This was my final test fit piece, the currently installed piece is black.
Thread
Thread Starter
Forum
Replies
Last Post