Dakota Digital HDX series
#1
Dakota Digital HDX series
Is there any interest/demand for Dakota Digital HDX series for third gens? I contacted them and they said "at this time there are no immediate plans for a HDX series gauge for this year (90-92) Camaro".
I'm thinking of contacting them again if there is a market for them and try to work some of my ideas in. I think the reason they're not on their radar is either the demand isn't there, or that the factory bezel wouldn't work. I'm thinking they could just cut out the middle part of the bezel to make it work fairly easily.
They'd be a minimum of $1300. Would you buy a set?
http://www.dakotadigital.com/index.c...d=689&mode=cat
I'm thinking of contacting them again if there is a market for them and try to work some of my ideas in. I think the reason they're not on their radar is either the demand isn't there, or that the factory bezel wouldn't work. I'm thinking they could just cut out the middle part of the bezel to make it work fairly easily.
They'd be a minimum of $1300. Would you buy a set?
http://www.dakotadigital.com/index.c...d=689&mode=cat
#3
Supreme Member
iTrader: (11)
Join Date: Sep 1999
Location: NJ
Posts: 4,350
Received 299 Likes
on
235 Posts
Car: 92 Firebird
Engine: 4.8 LR4
Transmission: T56
Axle/Gears: 3.45 9 Bolt
Re: Dakota Digital HDX series
They sell universal HDX gauges, in a Firebird, it should be easy enough to mount them in there. I could see putting them in a Camaro wouldn't be too difficult either.
I plan on putting HDX gauges in my 69 Suburban and Second gen Camaro too
I plan on putting HDX gauges in my 69 Suburban and Second gen Camaro too
#4
Re: Dakota Digital HDX series
Yeah, didn't see the dual 5.4" universal one before, only the smaller 3 3/8" with the 2 1/16" gauges. Definitely don't like the smaller one that squeezes the tach and speedo into one. The 5.4" could work like something like this...
https://www.thirdgen.org/forums/inte...ml#post5858003
Seems like there'd be a lot of dead space with just 2 big gauges. Hmm, something to keep in mind anyways.
This is what I'm thinking so far.
https://www.thirdgen.org/forums/inte...ml#post5858003
Seems like there'd be a lot of dead space with just 2 big gauges. Hmm, something to keep in mind anyways.
This is what I'm thinking so far.
#5
#6
Re: Dakota Digital HDX series
I actually commented on the youtube video, they said the HDX for 3rd gens has not been released 'yet' but they believe they are going to make them for 3rd gens.
But maybe more people should comment and show interest, so they hurry up!''
Edit:
Spoke too soon, i emailed Dakota also and they just replied back that they have no plans to make that for the 3rd gens.
I think more people need to email them and ask about it. Need to show them there is interest out there.
But maybe more people should comment and show interest, so they hurry up!''
Edit:
Spoke too soon, i emailed Dakota also and they just replied back that they have no plans to make that for the 3rd gens.
I think more people need to email them and ask about it. Need to show them there is interest out there.
Last edited by cdoyle; 02-15-2018 at 04:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
My90Iroc
Aftermarket Product Review
15
02-26-2002 08:25 AM
Tony89GTA
Transmissions and Drivetrain
3
11-21-2001 11:23 AM
Mark A 91Formula
Transmissions and Drivetrain
4
11-11-2001 04:58 PM
SLAYER6669
Transmissions and Drivetrain
1
09-25-2001 10:53 PM