hatch switch
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Sep 2017
Location: pa
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 z28
Engine: 5.7
Transmission: t56 6-speed
Axle/Gears: 3:42
hatch switch
ever since I changed my automatic to a t56 my hatch switch will not work. It works at the rear with the key.I was told that since I changed my neutral safety switch to the clutch pedal the computer thinks it is in gear and will not let the switch work.There is a green wire coming off the latch switch that I put a ground to (wrong thing to do) the switch worked for a few seconds and then melted the wire.So I unhooked it and repaired the wire. Does anyone know where that green wire goes? I also seen a relay in the console so I replaced that to still no work HELP It is a 92 z28
#4
Supreme Member
iTrader: (12)
Join Date: Sep 2007
Location: West Jefferson, OH
Posts: 1,280
Received 38 Likes
on
31 Posts
Car: basic third gens
Engine: that I like
Transmission: to restore
Axle/Gears: and enjoy
Re: hatch switch
When I swapped mine, I had to do the same thing. Now the e-brake lever has to be pulled so the hatch switch will function.
Thread
Thread Starter
Forum
Replies
Last Post
BlueZee28
Convertibles
13
12-02-2018 12:38 PM
t-ray10
Interior Parts Wanted
3
09-05-2010 01:04 PM