[For Sale] LSX setup
Thread Starter
Member
iTrader: (2)
Joined: Mar 2010
Posts: 166
Likes: 0
From: IOWA
Car: 89 IROCZ
Engine: Forged 347 LS1
Transmission: Built 4L60E with 4k stall
Axle/Gears: 4th gen w/ 3.42 gears
LSX setup
SOLD
I am seeing if anybody would be interested in buying the parts I have for an LSX set up I was building.
Parts include:
6.0L LQ4 (disassembled all bearings are good) but includes every thing included coils, brackets and harness
Brand new felpro head bolts
LS1 fbody intake maniflod with TB, fuel rails and injectors
LS1 fbody exhaust manifolds with factory steel gasgets with new studs and egr block off plates as well as flanges to make your own down pipes
Brand new melling oil pump
Brand new felpro full gasket and seal set
Brand new fbody oil pan, widage tray, pickup tube, dip stick
Water pump
brand new Alternator and branket (braket is broke but can be welded)
o2 sensors
brand newAeromotive intank fuel pump
Corvette fuel filter with regulator with -6 fittings
brand new 20ft of nylon braded -6 fuel line
Brand new crack pully bolt
3" CAI intake with filter and ait sensor
LSX swap motor mount plates
I'm sure there is more that i'm forgeting. Would be the perfect start for somebody wanting to put an LSX in there car. Would like to get $1500 out of every thing. Would prefer local pick up (fior the right price pending distance will meet half way) however if buyer is willing to pay shipping fees we can work something out.
I am seeing if anybody would be interested in buying the parts I have for an LSX set up I was building.
Parts include:
6.0L LQ4 (disassembled all bearings are good) but includes every thing included coils, brackets and harness
Brand new felpro head bolts
LS1 fbody intake maniflod with TB, fuel rails and injectors
LS1 fbody exhaust manifolds with factory steel gasgets with new studs and egr block off plates as well as flanges to make your own down pipes
Brand new melling oil pump
Brand new felpro full gasket and seal set
Brand new fbody oil pan, widage tray, pickup tube, dip stick
Water pump
brand new Alternator and branket (braket is broke but can be welded)
o2 sensors
brand newAeromotive intank fuel pump
Corvette fuel filter with regulator with -6 fittings
brand new 20ft of nylon braded -6 fuel line
Brand new crack pully bolt
3" CAI intake with filter and ait sensor
LSX swap motor mount plates
I'm sure there is more that i'm forgeting. Would be the perfect start for somebody wanting to put an LSX in there car. Would like to get $1500 out of every thing. Would prefer local pick up (fior the right price pending distance will meet half way) however if buyer is willing to pay shipping fees we can work something out.
Last edited by fonzie85; May 15, 2011 at 05:51 PM. Reason: item has been sold
Thread Starter
Member
iTrader: (2)
Joined: Mar 2010
Posts: 166
Likes: 0
From: IOWA
Car: 89 IROCZ
Engine: Forged 347 LS1
Transmission: Built 4L60E with 4k stall
Axle/Gears: 4th gen w/ 3.42 gears
Re: LSX setup
Not wanting to part out yet... would like to sell as whole
Trending Topics
Joined: Sep 2002
Posts: 3,685
Likes: 10
From: PA
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
Re: LSX setup
Man...wish you were closer and parting the stuff out. Ide take the LQ4 short block. Good luck with the sale! Bump for ya!
Junior Member
Joined: Feb 2006
Posts: 73
Likes: 0
From: Iowa
Car: 89 IROC-Z & 92 RS
Engine: 350 TPI & LQ4 408 in the works
Transmission: 700R4 & T-56
Axle/Gears: stock/ LT1 disc 3.42
Re: LSX setup
I'm from Iowa City, whats your price reduced to? What was the mileage on the LQ4 and what year is it? this is exactly what I am looking for. Does it have the engine harness as well? Please get back to me
Last edited by 3rdgenfever; May 4, 2011 at 09:25 PM.
Thread Starter
Member
iTrader: (2)
Joined: Mar 2010
Posts: 166
Likes: 0
From: IOWA
Car: 89 IROCZ
Engine: Forged 347 LS1
Transmission: Built 4L60E with 4k stall
Axle/Gears: 4th gen w/ 3.42 gears
Re: LSX setup
Price reduced to $1500... the engine had 60k... all internal parts are like new... the harness and pcm are one of the few parts that i do not have.
Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
Re: LSX setup
I think you may need to sell separately. 
I'm interested in these 2 items if so!
Pics of this? 3" CAI intake with filter and ait sensor
Corvette fuel filter with regulator with -6 fittings
brand new 20ft of nylon braded -6 fuel line
brand new 20ft of nylon braded -6 fuel line
Pics of this? 3" CAI intake with filter and ait sensor
Junior Member
Joined: Feb 2006
Posts: 73
Likes: 0
From: Iowa
Car: 89 IROC-Z & 92 RS
Engine: 350 TPI & LQ4 408 in the works
Transmission: 700R4 & T-56
Axle/Gears: stock/ LT1 disc 3.42
Re: LSX setup
Sent pm with offer, and I can come get it maybe this week or the weekend after this coming weekend, got a wedding and car show this coming weekend.... if you like the offer
Thread
Thread Starter
Forum
Replies
Last Post
