I need pins for the connecters on my LT1 PCM.
Thread Starter
Senior Member
iTrader: (2)
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
I need pins for the connecters on my LT1 PCM.
Like the topic says, I need the pins that go in the connecters that go to the LT1 PCM. I called the dealer and they said they had no listing of a part number and acted like I was crazy for asking. I even checked Radio Shack. I would like to find a GM part number or maybe something from Radio Shack. I removed the pins from my harness that go to my A/C and now I am trying to put it back.
Last edited by bingo; Aug 13, 2006 at 10:27 PM.
Thread Starter
Senior Member
iTrader: (2)
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
When I made my harness I took out all the pins I wasn't using. I have since moved and they have been lost.
Thread Starter
Senior Member
iTrader: (2)
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
I found this number:12084912. I am going to the dealership tomorrow and see if it is correct. I will post my findings.
Thread Starter
Senior Member
iTrader: (2)
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
The number I posted is the right number. They were $1.70 EACH! If anyone is interested this also fits LS1 PCMs.
Last edited by bingo; Aug 15, 2006 at 05:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM
MikkoV
TPI
2
Sep 9, 2015 04:25 PM
