Whats the differences in the (93-94) LT1 starters to the (95-97) LT1 starters??? and why do they have two diffrent part numbers? is there a difference in wiring or something? because im replacing the one thats currently on my gen1 block and i belive the one thats on there i got off a 94 LT1, iv seen the (95-97) LT1 starters are a bit cheaper is there a reason? would either one matter?

 

bump, kinda need one soon thanks...

 

the vette lt1 starter will work and is cheaper than the reg capricelt1 starter and is gear reduction unit.

 

thats not saying much... i mean theres gotta be a reason why theres a slip in model years?

 

I dont have a response but I do have an additional question that may help you and others as well...

I have a 94 LT1 with a 95 style cam/opti and am running a 97 T56/flywheel

which starter would you use? which high torque mini starter is the best? Can any be interchanged with the different years?

 

I have a 97 brand new lt1 starter which won't work with my new motor combo and it will work on all year lt1s. I looked into the online catalog and my part number is listed 93-97 which will also work on all 153 tooth older sbc as well. I paid 160, and would take 100 shipped if any of you were interested. I started the old motor probably 10 times total and the unit looks brand new. It's a bosch starter.

 

So i pulled my intermint starter of my engine tonight its a reman OEM No: 9000773 stater i looked it up and it says


PG260M Series Starter for Delco
1.7 kW, 12 Volt, CW Rotation
Design: PMGR (Permanent Magnet Gear Reduction)
Drive Teeth: 11
SERIES:FOR DELCO PG200/250/260M
LESTER NO: 6442
WAI No: 2-1481-DR
OEM No: 9000773



I'm pretty sure this is a b-body starter, it worked on my 305 with the stock flywheel and starter bolts and i didn't have to shim anything. . . what f-body starters can i use thats going to work then??

 

I posted the answer right above your question, any 93-97 lt1 starter should work no problem. I asked for a 95 camaro, but the catalog only shows one starter for all these years. Hope this helps, and if you'd like mine before it hits ebay let me know.

 

what is the most compression ratio that the lt1 starters will turn.