I am building a 29 Ford Pickup street rod. I installed a LS1 with a 4L60E out of a 2000 Camero. I used a fuel tank out of a 2004 GTO which fit well in the bed. I have the stock fuel pump set up in the tank. Now, I am confused on how to plumb the fuel lines. Two lines currently on the engine and two on the tank. However, I believe the top large line on the fuel pump is the evap line. Looking for advise on the proper line hookup from the tank to the engine.

 

Search the LSX forum, been covered many times.

 

Thanks - at 50 something I am new to using these forums. I don't see if I just cap off the Evap opening on top of the stock 04 GTO tunk fuel pump because I don't plan to use that port??

 

50-something? Claiming to be too young to understand????

Okay, I understand these things can be confusing, and different Boards do different layouts.

So, welcome aboard thirdgen.org.

Be aware that this Board is dedicated to 3rd gen GM f-bodies. As long as the topic can be applied to 3rd gens, it'll be allowed. Just don't get distracted with talk about mounting the LS into the '29 frame, for instance.

Oh, I moved this to the LS swap subforum...

 

https://www.thirdgen.org/forums/ltx-...third-gen.html