Members Camaros Post pictures and information about your Third Gen Sport Coupe, Berlinetta, LT, RS, Z28, and IROC-Z28 Camaros!

1990 Camaro RS Corner Carver Build

Thread Tools
 
Search this Thread
 
Old 03-15-2016, 01:30 PM
  #1  
Junior Member
Thread Starter
 
racing28x's Avatar
 
Join Date: Feb 2016
Location: Montana
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Camaro RS
Engine: 305
Transmission: 700R4
Axle/Gears: 3:23
1990 Camaro RS Corner Carver Build

I picked up a 1990 Camaro RS with a 305 and auto trans off of craigslist back in Dec. of 2015. I traded the previous owner an ATV that I had about $800 into. Despite the car having 162k on the clock it ran and drove nicely, so I felt I did pretty good on the deal.


The motivation for purchasing this car was because I will be participating in another open road rally this summer. I did one in 2014 running from Austin, TX to Chicago in my 2006 Duramax.


This year's rally will be starting in my own hometown of Billings, MT and will end 5 days later in Portland, OR. For the first day the organizers (Rally North America) rented the local drag strip for half a day and on the final day in Portland we get to run on the paved road course at PIR.

I have already torn out the suspension on the car, which is good, because I have to have the car finished by July 10th.


And ordered a lot of parts.


My current parts list includes:
UMI adjustable track bar
UMI rear lower control arms
PowerStop upgraded front rotors/calipers/pads
New rear drums/shoes/cylinders
3.23 gears to replace the 2.73
Ground Control springs and weight jacks
17x8 American Torque Thrust wheels
KYB GR2 shocks and struts
Pro-Forged complete steering kit
New bushings and ball joints for the front a-arms
New sway bar links
Spark plugs/cap/rotor
Complete car weatherstrip kit

Parts to come before July:
245/45-17 Summer performance tires
In-car communication equipment
Radar/laser detector
New windshield
Exhaust


Part of every rally that Rally North America puts on is to try to raise as much money as possible for a certain charitable organization. Every team is challenged to raise money, which in turn determines the starting grid for each day as well as other perks. If you have a few extra $$$$ (even if its just a $1) please consider donating to our benefiting charity here=> http://events.campsunshine.org/site/...eam&fr_id=1250

Until just recently my team was holding onto 3rd place, but recently were bumped to 4th. With every donation of $20 or more I will add your name to the car as part of the decal package during the rally, and please feel free to give me pointers on my build thread as this is where I've gotten the majority of my information on the build.

Third gen member sheikss has already been kind enough to donate, and will get his name on the car during the rally.

You can check out my original build thread here => https://www.thirdgen.org/forums/nort...erica-big.html

Last edited by racing28x; 03-14-2017 at 11:32 AM.
Old 03-14-2017, 11:35 AM
  #2  
Junior Member
Thread Starter
 
racing28x's Avatar
 
Join Date: Feb 2016
Location: Montana
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Camaro RS
Engine: 305
Transmission: 700R4
Axle/Gears: 3:23
Re: 1990 Camaro RS Corner Carver Build

Action photos:
Old 03-14-2017, 04:49 PM
  #3  
COTM Editor

iTrader: (11)
 
BADNBLK's Avatar
 
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes on 12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: 1990 Camaro RS Corner Carver Build

Those pictures are awesome! Come play in the USCA OUSCI at PPIR this summer
Old 03-15-2017, 10:20 AM
  #4  
Junior Member
Thread Starter
 
racing28x's Avatar
 
Join Date: Feb 2016
Location: Montana
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Camaro RS
Engine: 305
Transmission: 700R4
Axle/Gears: 3:23
Re: 1990 Camaro RS Corner Carver Build

I need to make a trip to Colorado for sure, (most of my family lives in eastern Colorado) but this season I'm going to kill some cones and make a run at a local SCCA title.
Old 03-16-2017, 02:55 PM
  #5  
COTM Editor

iTrader: (11)
 
BADNBLK's Avatar
 
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes on 12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: 1990 Camaro RS Corner Carver Build

Originally Posted by racing28x
I need to make a trip to Colorado for sure, (most of my family lives in eastern Colorado) but this season I'm going to kill some cones and make a run at a local SCCA title.
Well good luck man!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SpectroRacing
Organized Drag Racing and Autocross
31
09-18-2020 12:30 AM
Ricky16
Tech / General Engine
13
11-02-2019 10:10 PM
matts86cam
Exterior Parts Wanted
9
09-05-2016 08:54 AM
'91CamaroRS
TBI
23
03-16-2016 09:07 AM
86B4Z
History / Originality
71
03-16-2016 12:10 AM



Quick Reply: 1990 Camaro RS Corner Carver Build



All times are GMT -5. The time now is 09:46 PM.