winter plans?????????
Member
Joined: May 2004
Posts: 437
Likes: 0
From: edgemere, md
Car: 87 GMC Sierra
Engine: 350
Transmission: auto
Originally posted by megaracerx
lol, what about me?? i suck at working on cars
lol, what about me?? i suck at working on cars
Originally posted by iroc87matt
i'll help you since i need to learn, we can learn together. i need to work on mine soon, i got parts i just need time. does this yard have the same rule as alot (nobody under 18) cause if not ill go to, if twysted does
i'll help you since i need to learn, we can learn together. i need to work on mine soon, i got parts i just need time. does this yard have the same rule as alot (nobody under 18) cause if not ill go to, if twysted does

that would be cool actually, you have cell phone? i'm deff gonna need help over the winter
Supreme Member
Joined: Dec 2001
Posts: 1,282
Likes: 1
From: Elkton MD USA
Car: 1983, 1986
Engine: 2.8 2bbl, 2.8 MPFI
Transmission: 200C 3 speed, 700R4
Axle/Gears: 3.08, 3.42
Originally posted by megaracerx
you saidt the do this 4 times a year? are they all close togethr? and what sorta stuff do the have at this yard?
you saidt the do this 4 times a year? are they all close togethr? and what sorta stuff do the have at this yard?
Not sure by what you mean "close together". They used to have the F-bodies grouped together but now they are spread out in the "GM" section. They pretty much have everything but I think GM is their largest area.
Supreme Member
Joined: Dec 2001
Posts: 1,282
Likes: 1
From: Elkton MD USA
Car: 1983, 1986
Engine: 2.8 2bbl, 2.8 MPFI
Transmission: 200C 3 speed, 700R4
Axle/Gears: 3.08, 3.42
Here's a link to the place
Shorty's U-pull it
Shorty's U-pull it
Originally posted by MDv6man
4 times a year...
Not sure by what you mean "close together". They used to have the F-bodies grouped together but now they are spread out in the "GM" section. They pretty much have everything but I think GM is their largest area.
4 times a year...
Not sure by what you mean "close together". They used to have the F-bodies grouped together but now they are spread out in the "GM" section. They pretty much have everything but I think GM is their largest area.
lol, what i meant was, are the dates close together? or spread out through the year
Supreme Member
Joined: Dec 2001
Posts: 1,282
Likes: 1
From: Elkton MD USA
Car: 1983, 1986
Engine: 2.8 2bbl, 2.8 MPFI
Transmission: 200C 3 speed, 700R4
Axle/Gears: 3.08, 3.42
Originally posted by megaracerx
lol, what i meant was, are the dates close together? or spread out through the year
lol, what i meant was, are the dates close together? or spread out through the year
Junior Member
Joined: Oct 2004
Posts: 86
Likes: 0
From: Maryland
Car: 82 Camaro
Engine: 2.8L V-6
Transmission: 4 speed
Originally posted by MDv6man
Dates are spread out throughout the year
Dates are spread out throughout the year
Thread Starter
Senior Member
Joined: Jun 2003
Posts: 615
Likes: 0
From: sparrows point md
Car: 87 gta 89 ta
Engine: 5.0 5.7
Transmission: 700r4 x2
so have any of you done any of the stuff you planned... i sure havent yet, just tryin to get the iroc in the garage before we get a foot of snow....
Supreme Member
Joined: Dec 2001
Posts: 1,282
Likes: 1
From: Elkton MD USA
Car: 1983, 1986
Engine: 2.8 2bbl, 2.8 MPFI
Transmission: 200C 3 speed, 700R4
Axle/Gears: 3.08, 3.42
Originally posted by twysted87
so have any of you done any of the stuff you planned... i sure havent yet, just tryin to get the iroc in the garage before we get a foot of snow....
so have any of you done any of the stuff you planned... i sure havent yet, just tryin to get the iroc in the garage before we get a foot of snow....
Originally posted by twysted87
so have any of you done any of the stuff you planned... i sure havent yet, just tryin to get the iroc in the garage before we get a foot of snow....
so have any of you done any of the stuff you planned... i sure havent yet, just tryin to get the iroc in the garage before we get a foot of snow....
well, my T/a gave me a ton of crap this past month, i finally got her running, so hopefully by the end of january/febuary my 4th gen interior will be in...
Member
Joined: Mar 2004
Posts: 299
Likes: 0
From: Frederick, MD
Car: '86 Iroc, '87 Iroc Vert
Engine: 350 TPI, 305 TPI
Transmission: T5 in both
Axle/Gears: 3.73, 3.45 both LSD's
I think I am currently in the process of Re-new-ing my car. I have stripped the car down(not the paint yet). I actually have more of the car in the basement than in the garage.
I plan on removing all the undercoating. I think I may do a little subframe seam welding. Weld in some SFC's. I will be por15ing the whole under body. I am basically going to start from the ground up on this one. It's a little sad because I have a nice set of AFR's sitting on the work bench and an LT1 intake ready to be installed. I am dying to drive that motor. Anyhow I think my winter plans may end up being my 2004 winter to 2005 winter plans
I plan on removing all the undercoating. I think I may do a little subframe seam welding. Weld in some SFC's. I will be por15ing the whole under body. I am basically going to start from the ground up on this one. It's a little sad because I have a nice set of AFR's sitting on the work bench and an LT1 intake ready to be installed. I am dying to drive that motor. Anyhow I think my winter plans may end up being my 2004 winter to 2005 winter plans
Thread Starter
Senior Member
Joined: Jun 2003
Posts: 615
Likes: 0
From: sparrows point md
Car: 87 gta 89 ta
Engine: 5.0 5.7
Transmission: 700r4 x2
Originally posted by OneBadZ4U
I think I am currently in the process of Re-new-ing my car. I have stripped the car down(not the paint yet). I actually have more of the car in the basement than in the garage.
I plan on removing all the undercoating. I think I may do a little subframe seam welding. Weld in some SFC's. I will be por15ing the whole under body. I am basically going to start from the ground up on this one. It's a little sad because I have a nice set of AFR's sitting on the work bench and an LT1 intake ready to be installed. I am dying to drive that motor. Anyhow I think my winter plans may end up being my 2004 winter to 2005 winter plans
I think I am currently in the process of Re-new-ing my car. I have stripped the car down(not the paint yet). I actually have more of the car in the basement than in the garage.
I plan on removing all the undercoating. I think I may do a little subframe seam welding. Weld in some SFC's. I will be por15ing the whole under body. I am basically going to start from the ground up on this one. It's a little sad because I have a nice set of AFR's sitting on the work bench and an LT1 intake ready to be installed. I am dying to drive that motor. Anyhow I think my winter plans may end up being my 2004 winter to 2005 winter plans
Member
Joined: Mar 2004
Posts: 299
Likes: 0
From: Frederick, MD
Car: '86 Iroc, '87 Iroc Vert
Engine: 350 TPI, 305 TPI
Transmission: T5 in both
Axle/Gears: 3.73, 3.45 both LSD's
Just Wanted to share some pictures with you all.
Sorry, It didn't load. I'll try again later.
Sorry, It didn't load. I'll try again later.
Last edited by OneBadZ4U; Jan 1, 2005 at 01:00 AM.
Member
Joined: Mar 2004
Posts: 299
Likes: 0
From: Frederick, MD
Car: '86 Iroc, '87 Iroc Vert
Engine: 350 TPI, 305 TPI
Transmission: T5 in both
Axle/Gears: 3.73, 3.45 both LSD's
This thread is coming back from the Intensive Care Unit. Wanted to give an update. My winter has been so busy. My Iroc has been pushed to the back burner for a bit. I had to do some work on the RS. Replaced the L05 heads with Iron L98(off the Iroc) and put in an '87 Roller L98 Cam(used). Man does this car roll now!!! Before the work it was a New 30,000 mile old GM caprice L05. That is a bad combination with the TPI. I am all
now. My new project is my wife's brother's 93 Z28. Blown heads, milk in the bottom
. I can't hear a rod knock, yet. I need to get a bigger garage. Hopefully I'll be able to get back on the ROC soon. Oh well. What a winter.
now. My new project is my wife's brother's 93 Z28. Blown heads, milk in the bottom
. I can't hear a rod knock, yet. I need to get a bigger garage. Hopefully I'll be able to get back on the ROC soon. Oh well. What a winter. Last edited by OneBadZ4U; Feb 17, 2005 at 10:08 AM.
Thread Starter
Senior Member
Joined: Jun 2003
Posts: 615
Likes: 0
From: sparrows point md
Car: 87 gta 89 ta
Engine: 5.0 5.7
Transmission: 700r4 x2
my winter plans really never came about. i was gonna biuld up a gta but that plan got axed. and we just had a baby so i'll probably just put the new rims on my iroc and call it a day. i gotta do some serious tuning on it to pass emmissions i failed miserably.
Thread Starter
Senior Member
Joined: Jun 2003
Posts: 615
Likes: 0
From: sparrows point md
Car: 87 gta 89 ta
Engine: 5.0 5.7
Transmission: 700r4 x2
Originally posted by camarogirl18
well my winter plans were shot down too
owell ONE day
**** car insurance
well my winter plans were shot down too
owell ONE day
**** car insurance
Supreme Member
Joined: Apr 2004
Posts: 3,067
Likes: 0
From: Staunton,illinois
Car: 1966 impala , 1998 sebring vert,1978 buick regal turbo, 1991 chevy silverado 3/4ton 4x4 lifted
Engine: 283, 2.5,3.8 turbo 350
Transmission: powerglide,auto overdrive, th350,4L80
Originally posted by Megaracerx2
well, my plans weret getting banned!!
well, none of my plans cam together...other problems...ya know?
well, my plans weret getting banned!!
well, none of my plans cam together...other problems...ya know?
I too did not get around to my winter projects mine were stopped due to insufficient funding ....
Last edited by THEGENERAL; Feb 19, 2005 at 11:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post




