Custom Chip Burning
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 49
Likes: 0
From: Daleville, IN
Car: 1989 Camaro IROC Z28
Engine: 350 Stealth Rammed
Transmission: 700R4
Custom Chip Burning
I am looking for someone around the Central Indiana Region that can do custom programmed chips. I am in desperate need of this. If ANYONE at all can help with this, i would appreciate the information! Thanks in advance.
i have yet to find anyone that can properly tune a factory ecm. many come close but you'll spend a fortune, this is of course if you truly have a car that needs it. if your just modifying becaue you added cold air or something small then save your money.
reguardless. try looking up speartech. they are located in your state and supposedly to alot of work in that area. also lingenfelter does programming, not sure if they support tpi anymore though.
reguardless. try looking up speartech. they are located in your state and supposedly to alot of work in that area. also lingenfelter does programming, not sure if they support tpi anymore though.
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 49
Likes: 0
From: Daleville, IN
Car: 1989 Camaro IROC Z28
Engine: 350 Stealth Rammed
Transmission: 700R4
I actually have a few major upgrades. And if you look at my sig you can see that i dont have a TPI :P I found one in Ft. Wayne called Sinister Performance, i emailed them about 20 minutes ago. We will see what they say.
Joined: Oct 2001
Posts: 12,216
Likes: 1,141
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Im guessing STL is 2 far away?? if you need to you can stay @ my place ( 1HR north on 55 from STL)
Tim will come do it at my place .. if you want we have a dyno at the shop where I work 30 mins north on I55 very good work!!!
Tim will come do it at my place .. if you want we have a dyno at the shop where I work 30 mins north on I55 very good work!!!
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 49
Likes: 0
From: Daleville, IN
Car: 1989 Camaro IROC Z28
Engine: 350 Stealth Rammed
Transmission: 700R4
Thanks for the offer but i think im going to go with GMTuners.com. I have been talking to them via email and i think they can do what im looking for and they are about an hour to an hour and a half away.
Trending Topics
Junior Member
Joined: Jul 2004
Posts: 66
Likes: 0
From: Schaumburg
Car: 88 t/a red w/body kit
Engine: 305tpi...355 carbed
Transmission: 700r4
Originally posted by Tony Walch
Im guessing STL is 2 far away?? if you need to you can stay @ my place ( 1HR north on 55 from STL)
Tim will come do it at my place .. if you want we have a dyno at the shop where I work 30 mins north on I55 very good work!!!
Im guessing STL is 2 far away?? if you need to you can stay @ my place ( 1HR north on 55 from STL)
Tim will come do it at my place .. if you want we have a dyno at the shop where I work 30 mins north on I55 very good work!!!
Junior Member
Joined: Feb 2003
Posts: 58
Likes: 0
From: Ft. Wayne, IN
Car: 86 Camaro Z28
Engine: 5.3 LM7
Transmission: TH400
Axle/Gears: 3.23
I had GM Tuners or Ryan as I know him tune mine and it ran great and that was a Superramed 383. He is good at the GN/T-Type cars as well.
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 49
Likes: 0
From: Daleville, IN
Car: 1989 Camaro IROC Z28
Engine: 350 Stealth Rammed
Transmission: 700R4
I just got a custom chip/dyno tune done yesterday by LSRacingChips.com. These guys impressed me VERY much and i am happy with my car. The car is running perfect. Now i just need to get the rear end. But thanks for the reply.
Thread
Thread Starter
Forum
Replies
Last Post








