I ended up ordering the wrong set of heads for my engine, and I need to get the correct set. Here is the information on the heads I am selling:

Protopline iron heads 64CC/220CC 2.02" intake & 1.6" exhaust valves (Item # JRK 223400020A21) [Accepts both center mount and outside flange mount valve covers]
http://www.protopline.com/223400020a.htm
- .600" lift valve springs for hydraulic or solid lifter cams
-Straight plug design

I installed the heads on the small block, but never ran the engine. They have orange engine paint on them. I am asking $610 or best offer for the pair. If you need more information please let me know.

Here is the junk from the seller:
• Elgin 21-4N 1 piece stainless steel 2.02" intake & 1.6" exhaust valves
• Hardened valve spring retainers and 7° valve locks
• Hardened 3/8" rocker arm studs and 5/16" push rod guide plates
• Pioneer 1.250" OD valve springs set up for .600" lift high RPM cams
• Valve springs specs: 125# @ 1.850" - 335# @ 1.250 - Coil bind @ 1.150"
• High performance, high-strength cast iron casting
• High flow intake and exhaust ports
• Valve angle is 23º (same as stock heads)
• Bronze valve guides
• Unique multi angled valve seats to outflow the competition
• Special-shaped combustion chambers for improved burn
• Accepts both center mount and outside flange mount valve covers

 

Any one interested or suggestions on the price?