So over the last few years I have worked on my fair share of 3rd gens and collected more than my fair share of parts that I thought that I would use again on new projects. I've got a garage FULL and a storage unit FULL of all kinds of stuff that I am needing to get rid of as I just can't store it all anymore. I am honestly interested in looking at getting rid of it all at once, but I would consider a few parts requests. I'm not kidding when I say I have tons of stuff! I am located just north of Springfield, IL and if you are coming down then you are gonna need a truck cause I'm gonna pack it full. Here is just a little of what all has to go...

I have a TON of mechanical parts, A/C parts, heater duct, brake pedal assemblies, shifters, console parts, dash parts, armrests,mirror, speedometers, etc.



I've got gray seats and door panels:




keep reading, there is more!!

 

a 305 TPI and some misc TPI stuff:



a nose or 2:

 

and most all of a black interior including door panels....




Like I said, I am honestly looking for a single buyer to come on down and load most all this stuff up as I don't think it would be easy to ship it all... If anyone is interested in coming down and looking at it all, please let me know. If you are looking for something small I will look and see if I've got it.

 

what kind of shifters do you have? do you have a t-shifter?

 

i have a few automatic shifters, I'm not sure if I have any t-shifters in there somewhere

 

I can't imagine that no one here needs 10,000 3rd gen parts.....

 

what kind of armrests do you have? i need the round plastic pieces that go on the armrests for the older camaro's, and seat runner plastics that cover the floor bolts all black in color. thanks.

 

i will check on both for you. for the armrests you are talking abou the round tube that goes up top where the armrest comes in contact with the door?

 

yes that is it, thank you.

 

i know i used to have some from the various cars we've had in here. i will check.

 

You don't by any chance have a c100 connector do you? I don't need the whole harness just a pigtail with about 6 -12" of wire on it.

 

I am looking for a black interior. What do you have as far as Door sills, backseat area, and the hatch area plastic

 

ILL TAKE THE TPI INTAKE MANIFOLD

 

WILL THAT HOLLEY CARB BOLT ON TO IT?

 

YOU KNOW IM KIDDING ABOUT THE CARB PART GUYS

 

post up a pic of one and I will bet you your car I have one...... I've got 3 or 4 junk harnesses laying around here somewhere

 

haha....i'm sure i can make an adapter for it if you want it on there. sorry about the wait. i sent you some PM's back at ya

 

I will have to check on the door sills. I think I saw those laying around in there somewhere. The rear center piece of the black interior should be around here somewhere also. I do also have the driver rear with the glove box (the actual carboard box is missing, but i have found replacements for almost nothing out there), but for some reason the pic didnt post up. I also have the driver and passenger kick panels....

 

The TPI intake is an 85-86 manifold with casting number 14081005 so it will fit all the old standard SBC's that are out there with no mods.

 

Hmmm, sent you a PM about the interior. Guess it must be gone by now. I could come get it soon.

 

I would be interested in stopping by some time. There are a few parts there I am interested in. I am in the springfield area during the week.