I have :
*New* Eibach pro kit lowering springs
The box got wrecked during shipment. But springs are unused.
4th Gen 6Spd Center Console
Grey leather/vinyl/pleather seats with power lumbar supports
And a stripped LB9 block from the 91 T/A.
Make me an offer and Let Me Know!
Ron
*New* Eibach pro kit lowering springs
The box got wrecked during shipment. But springs are unused.
4th Gen 6Spd Center Console
Grey leather/vinyl/pleather seats with power lumbar supports
And a stripped LB9 block from the 91 T/A.
Make me an offer and Let Me Know!
Ron
Senior Member
If those seats were in primo condition I would be interested for sure, I think it may be a while before I am down your way again though. How are they, and how much would you like for them.
They have a couple tears in them. one of them in the headrest, the others are along the top of the back seat where the sun beat down on em.
----------
https://www.thirdgen.org/forums/nort...tml?highlight=
some pics of the seats here
----------
https://www.thirdgen.org/forums/nort...tml?highlight=
some pics of the seats here
Senior Member
I don't really need the back seat, but I am interested in the front seats, was that the headrest tear visible in the pic? How much would you like from the pair? What city are you located in?
I've also got a NICE sounding Flowmaster with 4 inch tips that i found in my garage. and a dual fan setup
any takers?
still have all this stuff to sell!!
Junior Member
Is the Flowmaster for an Fbody or a generic design? How much do you want for it and where are you located?
Banned
Where are you? And what year is the console from? All 4th gen consoles are not the same.
Prices? You listed none....
Prices? You listed none....
Member
How much for the springs?
Quote:
Prices? You listed none....
Im in northern California.... i dont remember what year i think it was a 00 firebird console. Its a 6 speed console. It was new in box when i got it... never used it. sat in my garage. it even has the Pontiac emblem still in the plastic wrap.Originally Posted by Stephen
Where are you? And what year is the console from? All 4th gen consoles are not the same.Prices? You listed none....
----------
Quote:
i bought the springs for 200... ill let them go for 125.Originally Posted by lthrneck
How much for the springs? let me know
Banned
Quote:
Originally Posted by EatFordShtDodge
Im in northern California.... i dont remember what year i think it was a 00 firebird console. Its a 6 speed console. It was new in box when i got it... never used it. sat in my garage. it even has the Pontiac emblem still in the plastic wrap. No pic?
Supreme Member
i bought the springs for 200... ill let them go for 125.
Are the springs fronts or rears? what is the drop for thosd springs? ( like how much will it lower the car?)
You in San Francisco? Maybe we can arrange a meet in Novato?
Are the springs fronts or rears? what is the drop for thosd springs? ( like how much will it lower the car?)
You in San Francisco? Maybe we can arrange a meet in Novato?
Supreme Member
ProKit drops 1" whereas Sportlines drop 1 3/4"
New in box would have both front and rear springs
New in box would have both front and rear springs

Yeah, what he said. You get all 4. I'm about to get a set of Pro for the 4th gen.
Pro-kit has 1" all around, but the Sportlines are 1.6" front, 1.3" rear as I recall.
I have a 1/2 of each on mine.
Pro-kit has 1" all around, but the Sportlines are 1.6" front, 1.3" rear as I recall.
I have a 1/2 of each on mine.
Quote:
New in box would have both front and rear springs
They are the prokit and yes both front and rear.Originally Posted by vindeezl
ProKit drops 1" whereas Sportlines drop 1 3/4"New in box would have both front and rear springs
Junior Member
u kno where i can buy struts to handle the drop on the springs if u can direct me ill buy ur springs this friday
Quote:
Straight from the Eibach websiteOriginally Posted by chrisf5
u kno where i can buy struts to handle the drop on the springs if u can direct me ill buy ur springs this friday http://eibach.com/cgi-bin/htmlos.exe...02023300000420
"What shocks or struts should I use with an Eibach Pro-Kit?
Eibach Pro-Kits are designed to work with original equipment shocks and struts provided they are in good working condition.
Aftermarket performance shocks and struts will increase the overall performance of your suspension and are also recommended for use with Eibach Pro-Kits. Pro-Damper - valved by Eibach, is the newly established line of Eibach performance dampers. The Eibach Pro-Damper is the ultimate match for the Pro-Kit as it is the only damper line which is valved to work in unison with the Pro-Kit characteristic. "
Junior Member
for sure where u lay ur head at im in livermore cali u near i hope? >.< get back to me u can txt me as i get on the comp not very often ill PM u my #
looks like the springs are sold for now. pending a phonecall tomorrow....
and sale is pending on the muffler, thanks!
and sale is pending on the muffler, thanks!
The springs are sold.
Still have the following
4th Gen Six Speed Center Console
Flowmaster Muffler with 4" tips
Grey leather/vinyl/pleather seats with power lumbar support
Dual Fan setup
Still have the following
4th Gen Six Speed Center Console
Flowmaster Muffler with 4" tips
Grey leather/vinyl/pleather seats with power lumbar support
Dual Fan setup
Senior Member
how much for the lb9? and what does it come with
Quote:
Nothing, its just the short block.Originally Posted by gurkgurkgurk
how much for the lb9? and what does it come with Supreme Member
Do you have the top radiator/fan mount?
Senior Member
Quote:
Originally Posted by EatFordShtDodge
Nothing, its just the short block. you want nothing for it?
Supreme Member
It comes with nothing.
Quote:
im not sure i know what you mean. do you mean the radiator support? like the one in this link?Originally Posted by 87tpi
Do you have the top radiator/fan mount? http://www.fernfactorypictures.com/c...o_engine_m.jpg
with the yellow sticker?
Supreme Member
Yes, that's it.
Senior Member
87 tpi, pnp near me has a bunch of 3 gens, i can pick you up one this week if you need it. they are the same between v6 and v8 right?
Supreme Member
I think single and dual fans are the only difference. I don't know if the v6's came with dual. Thank you, lets see what Ron has and I will let you know. I will need one though. I have the fans but if needed I guess I'll have extra.
Quote:
No, i dont think i have that upper support. Ill have to check what is bolted on to the fans though, but i highly doubt it. if i find different ill let you know.Originally Posted by 87tpi
I think single and dual fans are the only difference. I don't know if the v6's came with dual. Thank you, lets see what Ron has and I will let you know. I will need one though. I have the fans but if needed I guess I'll have extra. Supreme Member
thanks Ron. Ray, if it's still cool, let me know how much, thanks.
Senior Member
I will stop by on sunday, whatever they charge, cant be more that 5-10 bucks.
----------
and if anyone sees one i need a dash, my pristen pnp one just cracked all to hell.
----------
and if anyone sees one i need a dash, my pristen pnp one just cracked all to hell.
Supreme Member
Still have the 4th gen console? PM sent.
Senior Member
Thank you for the console and seats, my wife is very happy with them and looking forward to having them (and the 6-speed with the console) in her car. PM sent on the exhaust.


Glad you like them! 
So now all I have left are the Flowmaster Exhaust and the Dual Fan Setup

So now all I have left are the Flowmaster Exhaust and the Dual Fan Setup
hey strangers! i found a couple more parts here. i've got...
Brand New in box :
Energy Suspension polyurethane Transmission mount. and ...
1 Energy Suspension polyurethane clam shell engine mount insert.
$20 each
Brand New in box :
Energy Suspension polyurethane Transmission mount. and ...
1 Energy Suspension polyurethane clam shell engine mount insert.
$20 each
Supreme Member
you know that transmission mount by ES is sold new for only 16 dollars.
Supreme Member
He said the motor mount insert 
What's up Ron?

What's up Ron?

Quote:
i paid 22 dollars at summit for the tranny mount. still the same price. now. and the motor mount is 25 at summit.Originally Posted by TraviZ
you know that transmission mount by ES is sold new for only 16 dollars. Quote: 
What's up Ron?
i have both a motor mount insert and a transmission mount from ES. Originally Posted by vindeezl
He said the motor mount insert 
What's up Ron?
Not much vinny just makin ends meet.

Supreme Member
your right what do i know.
Quote:
some people pay more some people pay less. i paid more, and im selling it for less then i paid... are you buying it?Originally Posted by TraviZ
your right what do i know. Supreme Member
for 16 shipped, ya.
so now you want a 21.95 part for 10. nice.
Supreme Member
no i want a 16.99 part for 16 
ron im just messing with ya im just letting you know people can go to any local kragen and get it for cheaper then what you want yours for just cuz you got a bad deal on it, honestly its so cheap anyways you should just give it away, be a good samaritan. ive given lots of **** away before. or i sold it dirt cheap. ac delete box 20 bucks.. lol i dont even need the mount i have 3 of them. one on the iroc, the TA and my z28.

ron im just messing with ya im just letting you know people can go to any local kragen and get it for cheaper then what you want yours for just cuz you got a bad deal on it, honestly its so cheap anyways you should just give it away, be a good samaritan. ive given lots of **** away before. or i sold it dirt cheap. ac delete box 20 bucks.. lol i dont even need the mount i have 3 of them. one on the iroc, the TA and my z28.
its all good, i figured you were just messin with me ive just had a long week my sense of humor is out the door. my dad is in the hospital with a stroke.
times are rough i cant just GIVE parts away! i normally would but i gotta get paid! lol.
times are rough i cant just GIVE parts away! i normally would but i gotta get paid! lol.
Supreme Member
we own thirdgens we are all broke!
touche'

