OUTATIME GTA

iTrader: (2)

Okay all - This seems to be the popular choice of date/venue, so let's have a head count and mention if you want to bring something bbq and/or parts wise for swap/sale.

Probable items needed (feel free to mention whatever I forget):
BBQ, tables, cooking skills, chips, other food, desserts, drinks/coolers/ice, etc etc.

2 months to prepare, so no excuses!!

Sat... Mar 20 2010 Test and Tune
General Admission: $10
Testing Fee: $50 car/driver
(You will get lots of runs in unlike a Wed/Grudge night)
Gates open: 10:00 AM . Testing: 12:00 PM - 4:00 PM
5305 Excelsior Road - Sacramento, CA 95827

Hope folks from other areas can join us including new faces/cars that we haven't seen yet!

1. OUTATIME GTA

• Snacks/Condiments/plates/napkins/plasticware
• Not sure about parts yet

2. IROCK ZZ

• BM Megashifter boot and idicator plate
• Stock indicator plate precut for megashifter, small chip perfect for cupholder mod!
• Aftermarket stereo install kit
• Bezel that covers the stereo and climate controls
• Climate control bracket
• Berlinetta dash symbol
• Tpi intake to maf boot
• Tornado fuel saver
• Thinking of removing my partial nos kit, i have all parts that intall in the engine bay
• Square automatic shift **** and clip
• ACCEL HEI Supercoil

3. vindeezl

• IROC springs F/R
• NIB Block mounted Fuel Pump
• Sylvania low beams
• Firebird Horn caps (2)
• GTA wheel caps
• TPI spark modules
• Lots of small interior parts for camaro & bird

4. 86copchaser76 +3

• Dessert and 6ft table

5. 3rdBird

• Gas grill, a table, ice coolers and some drinks

6. 1TUF92Z
7. Ramair21 +5

• costco dogs
• chips
• some drinks

8. SMOKIN Z +1
9. Bullydawg +2
10. kairles
11. tortuga7708
12. TraviZ
13. Wills91RS
14. jbucago +3-4 3rd gens

• TPI plenum and runners
• Throttle bodys
• i have some TBI stock injectors brand new.
• Window Motors, etc... ill just bring stuff!

15. knightbandit88 +1
16. porkyzilla
17. Darkshot

IROCK ZZ

ok ill be the first to reserve!


this new face and car will be there!!

Parts to offer:
BM Megashifter boot and idicator plate
Stock indicator plate precut for megashifter, small chip perfect for cupholder mod!
Aftermarket stereo install kit
Bezel that covers the stereo and climate controls
Climate control bracket
Berlinetta dash symbol
Tpi intake to maf boot
Tornado fuel saver
Thinking of removing my partial nos kit, i have all parts that intall in the engine bay
Square automatic shift **** and clip
ACCEL HEI Supercoil


Ill have to look and see what i have,, if your intrested let me know(private message) or im leaving it all at home!

Also pm me if you want any pics

Looking for:
gold iroc z center caps for 86 iroc wheels 16inch

ill up date with parts i have and am looking for! i know theres more....

may bring a buddy up with his monte carlo ss and run down the track to smash all his smack talk on the iroc!

also, if i have the extra money(not looking good right now) ill bring some tasty ribs but ill need to borrow a bbq to warm em up

vindeezl

iTrader: (2)

Count me in

I have a shitload of parts, most notably:

IROC springs F/R
NIB Block mounted Fuel Pump
Sylvania low beams
Firebird Horn caps (2)
GTA wheel caps
TPI spark modules
Lots of small interior parts for camaro & bird

Also, IROCZZ I found some wheel caps for 85-87 I have 2 gold ones in great shape

A1c88camaro

I will try to get the day off.
If anyone needs a truck to haul the stuff with let me know.
Sadly most of you know what happend to my baby.
She still sits in my bro's driveway in kansas.
I would love to find a car agian.
I would just not be able to pay in full it would take a few paychecks debending on the price.
Thankfully If i find a roller I have the engine trans an rear exle to swap into it.

By the way I am back from afghan woot.

Bullydawg

iTrader: (7)

I will try my best to make it. I leave March 22, so it will be close and I don't know if I need to tie some stuff up at home before I leave. I really am going to try and go though!

I have a sub box set-up for 2 12's I am trying to sell... If anyone wants it, ill bring it.
I also have 2 TPI intake manifolds ill sell for $20 each. Both are stock.

Basically, if someone buys my sub box or Intake Manifolds, ill make it. If not, I doubt ill have the money.

Vinny, is Mikey going? If so, have him bring me that Throttle Body.

Here is a pic from the Mels Diner GTG last January - Joey, who decided to park next to the show stopping tercel... Lets try and get more thirdgens!

IROCK ZZ

I found a few more thirdgens here in town!!!

Im gonna let them know whats up!

vinny im pming you

OUTATIME GTA

iTrader: (2)

Keep 'em coming folks.
I want to see "definitely going to be there" so we know what to count on.
If I see "I'll try to make it", I'm going to hold off adding until you tell me otherwise.
Thanks!

- Del

Copchaser

iTrader: (2)

Tryin to get some last minute issues worked out with the car, but I am in. Anyone wanna loan me their tax return?

knightbandit88

I would like to go but I won't be racing cause am pretty sure my T/A won't pass the testing. Also where will the BBQ be at? I'll be coming from SAN Jose, i hope my car will make it....I'll bring the sodas Coke/Sprite/Orange/Pepsi/ and Tequila salt/lemon j.k.

3rdBird

iTrader: (1)

How much you need?

turbosbox

The question is, what car are you looking for at what price range and condition?
I ended up getting a lower mileage formula so I'll be selling my 89 TBI that I went to last GTG in. I got the EGR valve replaced and passed smog easily after that. It's a little rough in condition, but cheap. A little smoke on startup due to valve seals leaking, but runs and starts great with no trans issues. Maybe there are guys with cars available if you specify what price range and stuff.

OUTATIME GTA

iTrader: (2)

We'll be bringing the BBQ to the track.

Can we count on you for sure knightbandit88? Why wouldn't it pass the testing? I'll add you to the list if so.

I'm adding you Marc, obviously, since you sparked this idea.

1TUF92Z

Count me in.

Copchaser

iTrader: (2)

If I bring you the car to smog it, promise it wont cost me my left lung?

I still need to burn a chip for it.

What do they look for when inspecting the cars for safety?

Ramair21

iTrader: (3)

count me in too! I still habe left over costco dogs that i can bring. Ill bring chips and some drinks. No parts for me

3rdBird

iTrader: (1)

I have a friend that owns a towing company, his motto is "it doesnt cost an arm or a leg, just a tow"

As far as the smog, i dont remember anything too out of line for passing the inspection. Whats up with the computer? Are your wheels on? if so any pics?
Your car has to be there, especially with those new wheels of yours.

IROCK ZZ

i know that company!!! they have been in our yard a bunch of times, just cant think of thier name!

SMOKIN Z

iTrader: (4)

Count me in for sure. I will try to fit as many parts as i can in my roadster........ I have lots....

Copchaser

iTrader: (2)

No wheels this time.. Rears are an inch too wide and stick out from the fender, so I have to narrow the rear a couple inches. But the next GTG it will be done for sure.

3rdBird

iTrader: (1)

Bill Moranville @ Carion Transportation.

1TUF92Z

Are you thinking of narrowing the rear axle or changing the rims to a narrower ones?

Copchaser

iTrader: (2)

Narrowing the rearend.. Wheels cost WWAAAAYYYY to much to just buy more.

Bullydawg

iTrader: (7)

I am in for sure now... My father and I are going and will most likely be racing!

Ramair21

iTrader: (3)

AWESOME!!! Im going to take you down little brotha!! LOL

Bullydawg

iTrader: (7)

I need slicks... I hope the track prep is good and I get some traction out there... If I cut a 1.7 imma get my 12's....

IROCK ZZ

can someone post or send me whats required of the safety check? ive never ran a car down the track before and i would love to in my iroc

Bullydawg

iTrader: (7)

Basically, just don't leak any fluids... At least that is what they check on the Street Legal Drags on wednesday...

webeeZ28

iTrader: (2)

They check to make sure nothing is loose in the engine compartment. Major factor being that your battery is held down in place correctly. They got me on that the last time I was there. Due to many problems, there is that one highlighted section in red


General Test and Tune Rules

• All vehicles must pass a basic NHRA ET Bracket safety inspection. For a full listing of requirements, consult an NHRA Rulebook.
  
• All Drivers must have a valid state driver's license.
• A single co-driver is permitted in vehicles running slower than 14.00 seconds. Co-drivers must be at least 16 years old and must sit in the front seat.
  
• All drivers and co-drivers must wear long pants and shirts with sleeves (no tank tops).
  
• SFI approved helmets are required for all vehicles running quicker than 14.00 seconds.
  
• Significant additional requirements including but not limited to a roll bars and driver's jackets are required for vehicles quicker than 11.50 seconds.
  
• Motorcycle racers slower than 10.99 seconds are required to wear a heavy jacket, gloves, helmet with eye protection, and shoes covering the tops of the ankles. Significant additional requirements including full leathers are required for motorcycles quicker than 10.99 seconds.
  

jbucago

I will Definatly Be there... And i will Definatly take your Sub Box and most likley buy both of your TPI manifolds... Im trying Really really hard to go TPI if i save my pennies im sure i will have the money to make it and buy your stuff!!! Im poor... :P

Bullydawg

iTrader: (7)

Sounds good. Just let me know! It's all just taking up space. Make me an offer on the Sub Box.

OUTATIME GTA

iTrader: (2)

Added you Bullydawg.

If you guys know for sure you are bringing more folks with you, can you post up a +1, or however many just to get an idea head count wise? Thanks.

Copchaser

iTrader: (2)

plus 3 for me: fiance, son and possibly IrocMonster (David Norman)

Ramair21

iTrader: (3)

im brining the Jimenez Fam! LOL. But ill bring some extra food and Drinks. Food should not be a problem LOL

Jazz T/A

Im in for sure. even if i dot get the t-tops seals by then (dam classic industries) and ill look in the shed to c what i can find that i dont need.

and bullydawg ill let u know when it gets closer if i want the sub box or not. i want it just i dont have room for it so ill c if the trans am is ready for it buy then.

Copchaser

iTrader: (2)

So are we set on food and supplies, Del? I can bring a couple 6 foot tables if you think we may need them, let me know if there is anything we need.

OUTATIME GTA

iTrader: (2)

Hey John, I think at least 1 6ft table would be good and if you want to bring any other food/dessert to go with the dogs that works too.

Do we have a gas BBQ and ice chests? I realize we still have almost 2 months to this, but it's good to be prepared!

Ramair21

iTrader: (3)

Hey Marc, Could you bring your gas BBQ again! That thing worked like a charm!

Copchaser

iTrader: (2)

Not a problem Del, dessert and a 6 footer. Got it.

IROCK ZZ

I also realllllllly need a working hatch pulldown motor! only need the motor part

3rdBird

iTrader: (1)

Theres a GTA and a couple Camaros at the PNP on North Antelope, they were pretty complete when I was there, bout a month ago.

I'll bring the gas grill, a table, ice coolers and some drinks.

OUTATIME GTA

iTrader: (2)

Thanks Marc.

I'm only seeing 10 people on this list. Who else?!??

Copchaser

iTrader: (2)

Good Luck at that PNP.. So many puddles, kinda frustrates the trip to get some good parts. I had to leave cause every car I was tryin to get parts from I had to swim to get to.. hahaha... There is a white 92 RS toward the back of the lot. Damn near complete..

IROCK ZZ

thats a long way to go for pnp. might try the stockton one

tortuga7708

I'm down for this. Hit me up in message wit more info if I need to take any thing or money or stuff like that.

vindeezl

iTrader: (2)

Had to double check the date again, we really only got 10 rolling for this?

Guess I'm saving gas and taking the truck heh

OUTATIME GTA

iTrader: (2)

tortuga7708 - Just bring some $$ for racing or spectating.
Vin - Still have over a month, figured it was too early to push out any reminders to show up. Always last minute changes for folks.

tortuga7708

alright. thanks
i got the day off already so you will see me out there for sure.

1TUF92Z

Have you priced how much it cost to get the rear housing/axle narrowed? I'm sure it would be somewhere from $800 and above. That does not include the removal and installation of the rear end.

Copchaser

iTrader: (2)

Yeah, there is a place over in this area named Jaws, they have the blue Supra TT thats we see at the track from time to time. Anyways they Quoted me about a grand to narrow it and rebuild it with custom aftermarket axles, blah,blah. I just have to pull it from the car and take it to them empty. All I know how to do is yank the axles. Either way Ima get it done after the GTG. for now Ima roll stock. Plus Im waitin on Ed to finish the brackets for the C5 rear brake setup, I only wanna yank these axles once, ya know?

1TUF92Z

You know I have been looking at rear end as well. I'm sure there are other options without needing to narrow the housing and you will have a stronger rear end. Yes, the Ford 9" and GM 12 bolt comes to mind. I'm going to measure the width of the rear end today. I wanna know the exact measurement then research begins.