i tried to figure it out with the wheel fitment sticky, but i cant because im dumb i have a 4th gen rear, and c5 y2k rims with two 1/8 inch spacers on each side, and the wheels could extend out another 1/2 inch if need be, but i want dished rims, can i with a 4th gen rear?

 

I don't see why it can't be done, the tires will just stick out more

 

i know that that's an option, i guess i should have said i still want them to fit i nthe wheel well so i can lower the car

 

With a 4th gen rear axle, about the best dish you can get is what the stock 3rd gen rear wheels have. With that, you'll have the tires sitting flushwith the fender lips....not tucked any.

Here's a car with the stock rear wheels& a 4th gen rear axle.

 

ahhh crap thats what i was afraid of. i have seen some rims that have the spokes go inward from the lugs, so its dished but with offset that would keep them tucked, i guess i'll just have to find those or some similar. thanks for the pics