ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
#152
Banned
iTrader: (4)
dang
man i can't belive on what i missed out on.......
willie, first i would like to say , "damn!" you have seriously done some kickazz work man, nothin but props........ soon i will be putting hopefully an ls2 six speed with an ati procharger in, do you think a person could use your setup up with it?
again props bro!
willie, first i would like to say , "damn!" you have seriously done some kickazz work man, nothin but props........ soon i will be putting hopefully an ls2 six speed with an ati procharger in, do you think a person could use your setup up with it?
again props bro!
#154
Junior Member
Join Date: Jul 2004
Location: Cola, SC
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 Iroc Camaro
Engine: 427 TPI
Transmission: 700-R4
Axle/Gears: 12 bolt 4.33
#158
Member
iTrader: (2)
Join Date: Aug 2006
Location: Ocala, Florida
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 5.7
Transmission: 700R-4
Axle/Gears: 9-Bolt Borg-Warner 2.77
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
So what is the deal? Is Tenacious Parts still someone we can use to get this setup? I am still able to pull up the website, but emails come back.
Thanks!
Thanks!
#159
Supreme Member
Join Date: Aug 2005
Location: Yellowknife, NWT, Canada
Posts: 3,004
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 Z28
Engine: 357
Transmission: TH-350C
Axle/Gears: 3.43
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
Anyone...?
Hello... echo... echo.... echo......
Hello... echo... echo.... echo......
#160
Supreme Member
Join Date: Jul 1999
Location: Adrian, Mi, USA
Posts: 1,551
Likes: 0
Received 25 Likes
on
20 Posts
Car: 1988 Pontiac Firebird Formula
Engine: 5.7 TPI
Transmission: 700R4
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
Tenacious Performance seems to be out of business. No idea when this happened, or why..... I am unsure of how to go about getting information on these kits, however...... Willie, the OP, is still active on the boards... PMing him may get ya somewhere, or you could try contacting some of the folks listed on the registration info for tenperf.com.
#162
Senior Member
Join Date: Jul 2001
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Conv. TA
Engine: Forged 350 with D-1SC
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
The only person I would suggest talking to is Dorian at ATI.
He worked with Willie putting together the set up.
It has been quite some time though.
I am also running the setup on my 91' TA.
Hoping to get it back on the road soon!
He worked with Willie putting together the set up.
It has been quite some time though.
I am also running the setup on my 91' TA.
Hoping to get it back on the road soon!
#163
Member
Join Date: Mar 2003
Location: algonquin il
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 gta
Engine: L98 D1SC procharger twin IC
Transmission: 700r4
Axle/Gears: 3.27
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
i believe i got the last twin high flow setup ...i dont think dorian works for ati anymore
#164
Member
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
Not only does it impede air flow, but you also have all that heat coming off the intercooler and going straight into your radiator.
#165
Senior Member
Join Date: Jul 2001
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Conv. TA
Engine: Forged 350 with D-1SC
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
Seems that someone at ATI would be willing to put together a set up and make a sale?
The biggest obsticle is that with this set up we had to fabricate our own brackets for the intercoolers. This was not a out of the box installation.
The best way to get information on this is to search mypontiac and willie for past posts concerning our set ups.
The biggest obsticle is that with this set up we had to fabricate our own brackets for the intercoolers. This was not a out of the box installation.
The best way to get information on this is to search mypontiac and willie for past posts concerning our set ups.
#167
Supreme Member
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
the whole point of spending 2-3k on a procharger setup was because it was easier than fabricating a turbo setup.
That was YEARS ago- Now turbos are cheap and reliable, and there are plenty of cheap manifolds to get you in the right direction. I completed a single turbo setup for a V8 recently for about $2000
$800 brand new 800 horsepower Precision turbo
Fabricated intercooler plumbing myself ($200 in U-bends)
$320 intercooler (not chinese)
$200 chinese manifold + (I re-welded to reinforce)
$200 Custom crossover & downpipe (outsourced this I am not good with a mig)
you also need gaskets, clamps, oil lines, and weld an oil return in the pan, I got a turbo with a v-band to make it easy to pull apart too.
IMO more effective and cheaper than an equivalent supercharger setup, and you should get better fuel economy (haha)
That was YEARS ago- Now turbos are cheap and reliable, and there are plenty of cheap manifolds to get you in the right direction. I completed a single turbo setup for a V8 recently for about $2000
$800 brand new 800 horsepower Precision turbo
Fabricated intercooler plumbing myself ($200 in U-bends)
$320 intercooler (not chinese)
$200 chinese manifold + (I re-welded to reinforce)
$200 Custom crossover & downpipe (outsourced this I am not good with a mig)
you also need gaskets, clamps, oil lines, and weld an oil return in the pan, I got a turbo with a v-band to make it easy to pull apart too.
IMO more effective and cheaper than an equivalent supercharger setup, and you should get better fuel economy (haha)
#169
Supreme Member
iTrader: (11)
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
Anyone have any up-to-date info on this? If this guy doesn't work for ATI anymore, can any of the people who have this setup please post their complete ATI parts sheet so I know exactly what to order?!
I'm wanting to pull the trigger and have the money RIGHT NOW.
Thanks!
I'm wanting to pull the trigger and have the money RIGHT NOW.
Thanks!
#170
Senior Member
Join Date: Jul 2001
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Conv. TA
Engine: Forged 350 with D-1SC
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
I never did get a parts list. I just spoke to Dorian and he sent what Willie had ended up using to make the kit.
There are so many metal and rubber hoses that are required.
Also, what is on the car has been cut to fit.
In addition, Willie had to fabricate mounting brackets to get the intercollers connected to the frame. He sent me many photos and provided templates for me to make them.
Willie originally had ATI send a box of miscellaneous parts. He requested additional stuff as needed and sent back what he didn't. Maybe you can find someone willing to work with you?
This is basically a Corvette twin intercooler kit from what I recall.
There are so many metal and rubber hoses that are required.
Also, what is on the car has been cut to fit.
In addition, Willie had to fabricate mounting brackets to get the intercollers connected to the frame. He sent me many photos and provided templates for me to make them.
Willie originally had ATI send a box of miscellaneous parts. He requested additional stuff as needed and sent back what he didn't. Maybe you can find someone willing to work with you?
This is basically a Corvette twin intercooler kit from what I recall.
#171
Senior Member
iTrader: (8)
Join Date: Jun 2009
Location: Peoria, AZ
Posts: 768
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28, 2000 T/A
Engine: SBC 355, LS1
Transmission: T56, T56
Axle/Gears: 10bolt 3.73, 3.42
Re: ATI's Twin Hi-Flow Intercooler System on a Third Gen? Stay Tuned...
I do not have mine installed, but I have an LT1 IC kit I plan to modify to use, the biggest hurdle IMO will be the Y's. Going from single 3" to dual 2.5" and to go through the IC's and then from the dual 2.5" back into the the 3", the best off the shelf option vs having something fabbed are exhaust Y's.
I'm pretty sure Willie used most parts from an LS1 kit.
Here is the parts list. Found on earlier pages in this thread.
(QTY)
1 AIGJ1A-1 (LS1 F-body I/C (right side)
1 AIGJ1A-2 (LS1 F-body I/C (left side) - these will need to be modified by you
for a scoop, see Willie's pictures.
1 AIGC2I-1 LT1 intake tube Polished or Satin - you will need to modify, see
Willie's pictures.
1 AIGC2I-2 Extended offset tube (MAF)
1 AIGC2I-21 Extended offset tube (speed density)
1 AIGI3I-2 Tube with surge valve bung
1 AIFC2I-4 Tube
3 AIGJ1I-6 Tube
2 AIGB2I-8 Tube
2 AIGA3I-1 Y-Tube (you will need to modify, see Willie's pictures)
1 RSST.065B-2.50 Raw tube 2.5" x 12" long section
2 ATR40I-90-1 2.5" 90 degree rubber elbow
1 ATR40I-45 2.5" 45 degree rubber elbow
2 ATR48I-090 3" 90 degree rubber elbow
2 AHR40B-000 2.5" X 4" long hose section
1 AHR40B-000 2.5" X 8" long hose section
2 AHR48B-000 3" X 6" long hose section
1 AHR64B-000 4" X 6" long hose section
1 AHR40B-000 2.5" X36" long hose section
1 AHF24B 3 ft long surge hose section
22 CL040I-1SS #40 hose clamps
8 CL040I-1SS #52 hose clamps
2 CL040I-1SS #64 hose clamps
1 RSAS.187B-1 3 ft of aluminum strap
I'm pretty sure Willie used most parts from an LS1 kit.
Here is the parts list. Found on earlier pages in this thread.
(QTY)
1 AIGJ1A-1 (LS1 F-body I/C (right side)
1 AIGJ1A-2 (LS1 F-body I/C (left side) - these will need to be modified by you
for a scoop, see Willie's pictures.
1 AIGC2I-1 LT1 intake tube Polished or Satin - you will need to modify, see
Willie's pictures.
1 AIGC2I-2 Extended offset tube (MAF)
1 AIGC2I-21 Extended offset tube (speed density)
1 AIGI3I-2 Tube with surge valve bung
1 AIFC2I-4 Tube
3 AIGJ1I-6 Tube
2 AIGB2I-8 Tube
2 AIGA3I-1 Y-Tube (you will need to modify, see Willie's pictures)
1 RSST.065B-2.50 Raw tube 2.5" x 12" long section
2 ATR40I-90-1 2.5" 90 degree rubber elbow
1 ATR40I-45 2.5" 45 degree rubber elbow
2 ATR48I-090 3" 90 degree rubber elbow
2 AHR40B-000 2.5" X 4" long hose section
1 AHR40B-000 2.5" X 8" long hose section
2 AHR48B-000 3" X 6" long hose section
1 AHR64B-000 4" X 6" long hose section
1 AHR40B-000 2.5" X36" long hose section
1 AHF24B 3 ft long surge hose section
22 CL040I-1SS #40 hose clamps
8 CL040I-1SS #52 hose clamps
2 CL040I-1SS #64 hose clamps
1 RSAS.187B-1 3 ft of aluminum strap
Last edited by 3rd gen Will; 04-06-2010 at 06:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM