Intercooler locations
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: MO
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro
Intercooler locations
Turbo 3rd genners, where have you placed your intercoolers for optimal cooling and ground clearance? COuld you have a front mount while retaining the factory hood? I'd like to see how it looks if you''ve got it. thanks!
#2
Supreme Member
iTrader: (1)
Join Date: Aug 1999
Location: Northern NJ
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula / 09 G8
Engine: LS1 / LS3
Transmission: M6 / M6
Axle/Gears: 3:42 / 3:27
Have a look at the sticky above for a dual setup. Most people have them parallel with the radiator and some have them parallel with the ground with a scoop.
#3
Senior Member
Thread Starter
Join Date: Jul 2002
Location: MO
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro
I went and looked under the car today, there is a good deal of space to front mount it and remove the fog lamps or to mount it facing down and fabricate a seperate airdam for it. The airdam gets plenty of air to the radiator with the front mount setup. I need to get a tape measure out and get some gross dimensions for the location.
#5
Member
Join Date: Nov 2001
Location: Midvale, UT
Posts: 482
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 RS
Engine: L03
Transmission: T5
Axle/Gears: 4.11
Andris, I'd like some more pics of your car, whatever you got, I checekd your website, but its not updated at all. I kept up with your project till recently.
Its looking really good!
email me some more pics at geekness@msn.com or post em here!
Its looking really good!
email me some more pics at geekness@msn.com or post em here!
#7
Supporter/Moderator
Jeff,
I check my mail every few hours throughout the day - SPD@Skulte.com (or flying_monkies@skulte.com, or any other @skulte.com, since it all gets defaulted to me for 90% of the skulte.com emails...). I haven't received an email from you in a few weeks, and don't have any real spam filtering going on (save for about 5 email addresses in the procmailrc that is sent to dev/null).
Here's another front shot, so this post isn't totally w/o content
Andris
I check my mail every few hours throughout the day - SPD@Skulte.com (or flying_monkies@skulte.com, or any other @skulte.com, since it all gets defaulted to me for 90% of the skulte.com emails...). I haven't received an email from you in a few weeks, and don't have any real spam filtering going on (save for about 5 email addresses in the procmailrc that is sent to dev/null).
Here's another front shot, so this post isn't totally w/o content
Andris
Trending Topics
#9
Supreme Member
iTrader: (7)
Join Date: Nov 2000
Location: michigan
Posts: 13,039
Likes: 0
Received 0 Likes
on
0 Posts
andris i sent you three separate ones...........
zerotosixtyV8, look to supercharger intercoolers as well since esentially you put them in the same places.
i've seen a few like andris, and the others are either twins that are located in the very far front corners or there are a few like my buddy maniac on this site that has his almost directly on top of the intake.
zerotosixtyV8, look to supercharger intercoolers as well since esentially you put them in the same places.
i've seen a few like andris, and the others are either twins that are located in the very far front corners or there are a few like my buddy maniac on this site that has his almost directly on top of the intake.
Thread
Thread Starter
Forum
Replies
Last Post
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
10-15-2015 08:04 AM