Okay somebody help me out here, ive been racking my brain trying to figure out what the hell is going on..... I wired up my ATI inline pump along with the wiring relay (Yellow=positive of pump, Orange=power, Black=ground, Grey=connect to stock pump grey wire) But i get no power from the pump when i turn on the ignition, i know the pump is good, it runs fine when i touch to power wire to the pump, but not through the relay with a good fuse, and a good ground. Is there a chance the relay is bad, i mean it's brand new, can i pick up the relay bottom at say radio shack err somthing, this is driving me nuts, i almost feel like putting in a switch so i can turn the damn thing on manually, what advice do you have ? Sending the relay back to ATI will take at least a week or more, should i just wire it up direct ?

 

if the wiring is good, then the relay is bad.

Just go to radio shack and get a new one.....

 

Cool man thanks for the help !