Third Generation F-Body Message Boards

Power Adders Getting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.

Good Head Gasket for Nitrous?

Thread Tools
 
Search this Thread
 
Old May 11, 2005 | 11:46 AM
Share
  #1  
BranZ's Avatar
BranZ
Thread Starter
Junior Member
 
Joined: Aug 1999
Posts: 92
Likes: 0
From: Texas
Car: 1991 Z28
Engine: 5.7
Transmission: A4
Good Head Gasket for Nitrous?
What are good head gaskets for 083 heads on 355 TPI for 150 shot of nitrous? Thanks, BranZ
Reply
0
Old May 11, 2005 | 03:30 PM
Share
  #2  
Free Bird's Avatar
Free Bird
Supreme Member
iTrader: (1)
 
Joined: Jun 2001
Posts: 1,668
Likes: 0
From: Dale City, VA
Car: 91 GTA and 85 IROC
Engine: 355
Transmission: gear jammer
Axle/Gears: 4.11
the bore is a little big but I'm using them w/ my 355 and a 300 shot. Fel-pro 1003 .041 compressed thickness and a 4.166" bore.
Reply
0
Old May 11, 2005 | 05:07 PM
Share
  #3  
BranZ's Avatar
BranZ
Thread Starter
Junior Member
 
Joined: Aug 1999
Posts: 92
Likes: 0
From: Texas
Car: 1991 Z28
Engine: 5.7
Transmission: A4
Are you using head studs or some good head bolts? I am considering upgraded them also. BranZ
Reply
0
Old May 12, 2005 | 05:05 PM
Share
  #4  
Free Bird's Avatar
Free Bird
Supreme Member
iTrader: (1)
 
Joined: Jun 2001
Posts: 1,668
Likes: 0
From: Dale City, VA
Car: 91 GTA and 85 IROC
Engine: 355
Transmission: gear jammer
Axle/Gears: 4.11
studs were to much of a PITA imo. So I'm using ARP head bolts.
Reply
0
Old May 12, 2005 | 06:20 PM
Share
  #5  
FSTFBDY's Avatar
FSTFBDY
Supreme Member
iTrader: (33)
 
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
http://www.cometic.com/catalogs/AutoCat04.pdf
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 camaro 305 v8 TBI idles very high and shifts at high idles
db057
TBI
34
Jan 21, 2023 01:13 AM
12.99 Cars Illustrated Challenge/1991 Z28
CarGuyDennis
Organized Drag Racing and Autocross
137
Dec 6, 2016 11:02 PM
350 (Bored 0.040 Over) Head Gasket Size/Thickness?
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
Missing diverter valve?
lakeffect2
Cooling
11
Aug 23, 2015 08:44 AM
Need advice on a "chip"
NWAsonoma
TBI
4
Aug 18, 2015 05:45 PM
Tags
Back to Subforum
Power Adders
View Next Unread
wire routing?




Advanced Search

All times are GMT -5. The time now is 06:09 PM.