BBSDesigns Turbo Headers; The Last Run
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
BBSDesigns Turbo Headers; The Last Run
Good News!! For those of you REALLY (cash in hand only) interested, I will be making a last run of turbo headers.
The business now had gone in a totally different direction and I rarely, and only use my jigs for making turbo systems for friends, special requests, or for me (I am not going to sell the jigs so please dont ask). That is the reason why this will be the last run.
This last run will start today and end in 30 days from today June 30th, 2007, so everyone that post in this thread with his or her turbo header request will be included, after that I will not be making more headers or at least for sale. People interested will be writting down their request, then emailing me at bermudezbrainstormingdesigns@hotmail.com with the complete shipping information. I will be accepting Paypal, money orders or checks (no corporative checks). All shipping will take place once the part(s) are built and payment have been cleared. All fabrication will begin after payment has been received and cleared.
I will only be offering headers, sorry no turbos or anything else, just headers. The only headers I will be offering are:
1) Race Single Turbo Header for V belt. For use with V belt setup with or without the A/C. This header is the same as Tim "TurboedTPI" is using on his Turbo Firebird with the serpentine belt setup, but with no A/C. (600+ hp). $500.00 ea.
2) Race Single Turbo Header for Serpentine Belt. For use with serpinte belt setup with or without the A/C. This header is a very tight fit, the cold section of the turbo can't be to large or it will hit the valve cover, we recommend a 60-1 Hi Fi or equivalent turbocharger. (500-550 hp). $500.00 ea.
3) Street & Strip Twin Turbo Headers. For use with both V belt or serpentine belt setups with or without A/C. Twin full TO3 turbos are to be used. The passengers side turbo's wastegate actuator might need (depending on the turbo) to be modified a little to fit and clear the A/C dryer and hard line. (600hp). $900.00 per pair.
4) Race Twin Turbo Headers are not going to be offfered, sorry too time consuming, unless he or she is willing to wait. How long? two to three months. $1600.00 per pair.
Again, for those of you that dont know what kind of quality I work with, well my headers are brutal strong, heavy bastards I use 3/8" thk flanges, 1/8" thick pipes all TIG welded. I am sure that one or two guys here running with my headers will throw something in.
Well, here it is, the last run of the BBSDesigns headers[tear].
PS: You guys have to see the recent Quad Turbo GTA pictures, its... well it looks pretty cool. I also included a collage of pictures so that you can see the different setups. Most pictures are from clients who send me them. There you'll find from turbo V6's to twin turbo V8's Vettes.
The business now had gone in a totally different direction and I rarely, and only use my jigs for making turbo systems for friends, special requests, or for me (I am not going to sell the jigs so please dont ask). That is the reason why this will be the last run.
This last run will start today and end in 30 days from today June 30th, 2007, so everyone that post in this thread with his or her turbo header request will be included, after that I will not be making more headers or at least for sale. People interested will be writting down their request, then emailing me at bermudezbrainstormingdesigns@hotmail.com with the complete shipping information. I will be accepting Paypal, money orders or checks (no corporative checks). All shipping will take place once the part(s) are built and payment have been cleared. All fabrication will begin after payment has been received and cleared.
I will only be offering headers, sorry no turbos or anything else, just headers. The only headers I will be offering are:
1) Race Single Turbo Header for V belt. For use with V belt setup with or without the A/C. This header is the same as Tim "TurboedTPI" is using on his Turbo Firebird with the serpentine belt setup, but with no A/C. (600+ hp). $500.00 ea.
2) Race Single Turbo Header for Serpentine Belt. For use with serpinte belt setup with or without the A/C. This header is a very tight fit, the cold section of the turbo can't be to large or it will hit the valve cover, we recommend a 60-1 Hi Fi or equivalent turbocharger. (500-550 hp). $500.00 ea.
3) Street & Strip Twin Turbo Headers. For use with both V belt or serpentine belt setups with or without A/C. Twin full TO3 turbos are to be used. The passengers side turbo's wastegate actuator might need (depending on the turbo) to be modified a little to fit and clear the A/C dryer and hard line. (600hp). $900.00 per pair.
4) Race Twin Turbo Headers are not going to be offfered, sorry too time consuming, unless he or she is willing to wait. How long? two to three months. $1600.00 per pair.
Again, for those of you that dont know what kind of quality I work with, well my headers are brutal strong, heavy bastards I use 3/8" thk flanges, 1/8" thick pipes all TIG welded. I am sure that one or two guys here running with my headers will throw something in.
Well, here it is, the last run of the BBSDesigns headers[tear].
PS: You guys have to see the recent Quad Turbo GTA pictures, its... well it looks pretty cool. I also included a collage of pictures so that you can see the different setups. Most pictures are from clients who send me them. There you'll find from turbo V6's to twin turbo V8's Vettes.
Last edited by BBSDesigns; 06-01-2007 at 01:57 AM.
#2
Supreme Member
iTrader: (1)
Join Date: Jun 2001
Location: Tacoma, Wa
Posts: 3,109
Likes: 0
Received 25 Likes
on
17 Posts
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Re: BBSDesigns Turbo Headers; The Last Run
Awesome timing! Do the single turbo headers come with a shorty for the opposite side or is that something we have to source? I just spent this paycheck on c6 brake pads so I'll be emailing you next paycheck. What kind of turnaround do you expect? These don't come coated in anyway do they?
#3
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
Awesome timing! Do the single turbo headers come with a shorty for the opposite side or is that something we have to source? I just spent this paycheck on c6 brake pads so I'll be emailing you next paycheck. What kind of turnaround do you expect? These don't come coated in anyway do they?
The single headers can be used with either the stock driver's side manifold or header if you have one. The stock exhaust pipe comming from the driver's side header or manifold is used to connect to the passengers turbo header, or you can always make a new one at the muffler shop.
#4
Senior Member
iTrader: (1)
Join Date: Jul 2005
Location: SW Michigan
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 G T/A
Engine: L98
Transmission: 700R4
Axle/Gears: 3.27 9 Bolt
Re: BBSDesigns Turbo Headers; The Last Run
Again, for those of you that dont know what kind of quality I work with, well my headers are brutal strong, heavy bastards I use 3/8" thk flanges, 1/8" thick pipes all TIG welded. I am sure that one or two guys here running with my headers will throw something in.
Well, here it is, the last run of the BBSDesigns headers[tear].
Well, here it is, the last run of the BBSDesigns headers[tear].
https://www.thirdgen.org/forums/powe...ly-runnin.html
#5
Supreme Member
Join Date: Jan 2003
Location: Ontario, Canada
Posts: 1,931
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
Re: BBSDesigns Turbo Headers; The Last Run
yeah man , definately a heavy *** built piece. Like 1/8" thick. check my www. for pics on it
#6
Member
iTrader: (2)
Join Date: Feb 2004
Location: S.Florida
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro Z28
Engine: 350 TPI
Transmission: Auto
Re: BBSDesigns Turbo Headers; The Last Run
You will Never have to worry about the turbo headers for as long as you own your car!!!!! These are some HEAVY DUTY hearders!
Ray
Ray
#7
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
That's no joke either, I've never seen such a heavy duty piece in my life! Your single RACE header is the way to go, I love my setup.
https://www.thirdgen.org/forums/powe...ly-runnin.html
https://www.thirdgen.org/forums/powe...ly-runnin.html
Wow, nice, clean and stunning GTA! Man don't sell it! Get the money elsewhere 'cause a car like that wont be found anywhere! I wish my GTA looks a bit like yours someday.
Trending Topics
#8
Member
Join Date: Apr 2004
Location: on the street
Posts: 467
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Formula 350
Engine: L98 with a T-76
Transmission: ArtCarr 700-R4
Axle/Gears: Bone stock 10bolt and 3.23's
Re: BBSDesigns Turbo Headers; The Last Run
Yes, these headers are very beefy. I've been running mine for over 3 yrs now, not one problem. Anyways, BBS, my brother is doing a very simular setup as mine, can u you make the same header i have but with out the wastegate tube on the front? We are going to decide where we are puting the wastegate once the header and turbo are on the car, so you wont have to put any waste gate flange on or nothing. Let me know buddy. Thanks
-Tim
p.s. this car will be even more impressive that mine (we hope) GT-42 turbo
-Tim
p.s. this car will be even more impressive that mine (we hope) GT-42 turbo
#9
Supreme Member
iTrader: (2)
Join Date: Nov 2003
Location: Antelope, CA
Posts: 3,400
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
Re: BBSDesigns Turbo Headers; The Last Run
wow!!!!!! don't know if I gonna turbo my formula, but I can't pass this up.
#10
Junior Member
iTrader: (1)
Join Date: Sep 2005
Location: Belleville, Il
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: '90 GTA
Engine: 385 Stroker
Transmission: 700R4/ Edge 3400
Axle/Gears: 10 bolt/ Richmond 3.73
Re: BBSDesigns Turbo Headers; The Last Run
So for the single turbo headers, is it just the header on the side holding the turbo or another header to come over and connect with it?
#11
Senior Member
Join Date: Jul 1999
Location: Concord, NC
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC-Z
Engine: Superramed 355 w/ intercooled T72
Transmission: T56 -=- www.iroc-ss.com
Re: BBSDesigns Turbo Headers; The Last Run
The people spoke, now you gotta step up! I can vouch that the product is very nice. Edgardo is also a very helpful guy!
--------
-- Mark
--
-- 86 IROC-Z Forged 355, M6, T72 turbo
-- 68 C10 LT1 Stepside in hundreds of pieces
(click for links)
--------
-- Mark
--
-- 86 IROC-Z Forged 355, M6, T72 turbo
-- 68 C10 LT1 Stepside in hundreds of pieces
(click for links)
#13
Supreme Member
Join Date: Feb 2002
Location: miami, florida
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: BBSDesigns Turbo Headers; The Last Run
Hey BBS, is it possible for me to call you and talk to you for a few minutes about doing a set of twin headers? I have a few questions I need answered before I can shell out my hard earned money.
#15
Member
iTrader: (1)
Join Date: Jun 2006
Location: Lubbock, Tx
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: L98 5.7 350 TPI
Transmission: Brand New (again) 700r4
Axle/Gears: GM 10 bolt 7.625 W/ TrueTrac 3.23
Re: BBSDesigns Turbo Headers; The Last Run
Definitly intersested in that single race header!!!!
#16
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
First, THANK'S to all you guys and gals (if any, I hope at leats there's one hardcore girl out there, oh well I know there is one; my wife ) for the nice words and support! I really and wish I could live out just doing headers and turbo setups, but reality is that I had to move to other things in order to eat
Hello vwdave;
I got your message, but the thing is that the headers I got for twin turbo will only fit on full TO3's (no TO3/TO4 hybrids) with the A/C. You might get the headers and maybe hack up a little the valve covers or modifiying the A/C lines, and might be more to that, but I really havent made the attempt. The turbos will clear the hood, but I always say that you'll need heat shielding for everything that you can put to, the more the better.
TurboedTPI;
Yes, I can make you the header without the wastegate flange.
Starfish;
The price is for one header only, you need to use the current header or manifold in the driver's side if going single turbo. The crossover pipe is new or modified stock, easy thing at a muffler shop.
#17
Supreme Member
Join Date: Feb 2002
Location: miami, florida
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: BBSDesigns Turbo Headers; The Last Run
Hello vwdave;
I got your message, but the thing is that the headers I got for twin turbo will only fit on full TO3's (no TO3/TO4 hybrids) with the A/C. You might get the headers and maybe hack up a little the valve covers or modifiying the A/C lines, and might be more to that, but I really havent made the attempt. The turbos will clear the hood, but I always say that you'll need heat shielding for everything that you can put to, the more the better.
I got your message, but the thing is that the headers I got for twin turbo will only fit on full TO3's (no TO3/TO4 hybrids) with the A/C. You might get the headers and maybe hack up a little the valve covers or modifiying the A/C lines, and might be more to that, but I really havent made the attempt. The turbos will clear the hood, but I always say that you'll need heat shielding for everything that you can put to, the more the better.
#18
TGO Supporter
iTrader: (5)
Join Date: Feb 2000
Location: St. Augustine, FL
Posts: 1,852
Likes: 0
Received 12 Likes
on
11 Posts
Car: 89 GTA
Engine: 383
Transmission: 4L80E
Axle/Gears: 12 bolt-3.73
Re: BBSDesigns Turbo Headers; The Last Run
BBS:
I'm in for 2 sets.
I need to know how big of a turbo can you put on the passenger side before you run out of room valve cover wise and strut tower wise? I want to run either a t-76gts or t-88 both on a t-4 flange. Can you raise the turbo location up maybe a half-inch or an inch so that I can run a bigger turbo without clearance issues?
Can you make the single headers with a t-6 flange if necessary?
Also, my afr head exhaust ports are matched to a fel-pro 1406 d-port gasket and I had to have my header ports opened up to match. Do you have a bigger flange opening than stock available?
I'm in for 2 sets.
I need to know how big of a turbo can you put on the passenger side before you run out of room valve cover wise and strut tower wise? I want to run either a t-76gts or t-88 both on a t-4 flange. Can you raise the turbo location up maybe a half-inch or an inch so that I can run a bigger turbo without clearance issues?
Can you make the single headers with a t-6 flange if necessary?
Also, my afr head exhaust ports are matched to a fel-pro 1406 d-port gasket and I had to have my header ports opened up to match. Do you have a bigger flange opening than stock available?
Last edited by 89gta383; 06-05-2007 at 11:50 AM.
#19
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: BBSDesigns Turbo Headers; The Last Run
1) Race Single Turbo Header for V belt. For use with V belt setup with or without the A/C. This header is the same as Tim "TurboedTPI" is using on his Turbo Firebird with the serpentine belt setup, but with no A/C. (600+ hp). $500.00 ea.
I'm in and you have E-mail!
I'm in and you have E-mail!
#21
Supreme Member
Join Date: Sep 2005
Location: Osceola Indiana
Posts: 2,151
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
Re: BBSDesigns Turbo Headers; The Last Run
this is gonna sound stupid but, 500 for both both manifolds, or 500 bucks for each one
#23
Supreme Member
iTrader: (1)
Join Date: Jan 2002
Location: garage
Posts: 4,432
Likes: 0
Received 1 Like
on
1 Post
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: BBSDesigns Turbo Headers; The Last Run
I think BBS explicitly states that the 62mm unit with the comp. xx A/R is the max. size to fit using the single manifold.
#24
Member
Join Date: Apr 2004
Location: on the street
Posts: 467
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Formula 350
Engine: L98 with a T-76
Transmission: ArtCarr 700-R4
Axle/Gears: Bone stock 10bolt and 3.23's
Re: BBSDesigns Turbo Headers; The Last Run
In a thirdgen, both are impossible to mount where BBS mounts the turbo between the valve cover and hood. You need a custom setup for anything with a T6 flange or 76mm+ comp. housing (with a larger A/R). A T6 sized unit or one with a 76mm+ inducer make the 62-1 turbo look tiny.
I think BBS explicitly states that the 62mm unit with the comp. xx A/R is the max. size to fit using the single manifold.
I think BBS explicitly states that the 62mm unit with the comp. xx A/R is the max. size to fit using the single manifold.
#25
Supreme Member
iTrader: (1)
Join Date: Jan 2002
Location: garage
Posts: 4,432
Likes: 0
Received 1 Like
on
1 Post
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: BBSDesigns Turbo Headers; The Last Run
The height of the GT42 depends on the turbine A/R and flange. Is it a T6/diesel flange or a T4 flange. I am guessing that it is T4. Also, the GT42 has a relatively small comp. A/R compared to a Garrett T-series with an equiv. comp. inducer wheel. A 76mm and bigger T-series has a .95 A/R large comp. housing.....that what I was thinking of.
Overall, I was wrong. But keep in mind what size A/R the comp. housing is. Can you get a 3.5" pipe (GT42 correct size) to the comp. outlet of the GT42R in a realistic way? Was the comp. housing turned so the A/R by the valve cover was at a minimum?
Overall, I was wrong. But keep in mind what size A/R the comp. housing is. Can you get a 3.5" pipe (GT42 correct size) to the comp. outlet of the GT42R in a realistic way? Was the comp. housing turned so the A/R by the valve cover was at a minimum?
#26
TGO Supporter
iTrader: (5)
Join Date: Feb 2000
Location: St. Augustine, FL
Posts: 1,852
Likes: 0
Received 12 Likes
on
11 Posts
Car: 89 GTA
Engine: 383
Transmission: 4L80E
Axle/Gears: 12 bolt-3.73
Re: BBSDesigns Turbo Headers; The Last Run
Thanks for the info.
#27
Member
Join Date: Apr 2004
Location: on the street
Posts: 467
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Formula 350
Engine: L98 with a T-76
Transmission: ArtCarr 700-R4
Axle/Gears: Bone stock 10bolt and 3.23's
Re: BBSDesigns Turbo Headers; The Last Run
The GT-42r is way bigger than my 62-1, im not sure how big a t76 turbonetics is. But the inlet to the GT-42 is 5in. It literaly dwarfs my turbo. It is a t-4 turbine with a 1.01 a/r
#29
Member
Join Date: Nov 2003
Location: upstate new york
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
definitely ineterested in a v-belt non a/c single race header, just let me know about shipping cost to 12831, NY, and expected turnaround once youve recieved my payment.
thanks in advance
thanks in advance
#30
Supreme Member
iTrader: (1)
Join Date: Jan 2002
Location: garage
Posts: 4,432
Likes: 0
Received 1 Like
on
1 Post
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: BBSDesigns Turbo Headers; The Last Run
Okay, I said I would stop posting, but I just wanted to say that the GT42 that will fit will push enough air for 800+ HP on BBS' header. I don't own one of his headers but the pics show it is a good design. The materials he uses are excellent.
No, I have nothing to do with BBS, but have been around the turbo boards for a while.
No, I have nothing to do with BBS, but have been around the turbo boards for a while.
#31
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Pictures of setups, to clear any confusion
I attached a picture of how each type of header fits on each application to clearup any confusion.
#32
Senior Member
Join Date: Jun 2002
Location: Michigan
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Camaro
Engine: 350
Transmission: th350
Re: BBSDesigns Turbo Headers; The Last Run
So then can we order from now up till the 30th then? If so then you will be getting an email as soon as I get paid
#33
Member
Join Date: Nov 2003
Location: upstate new york
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
im sure youre getting flooded with mail, but get back to me soon as possible please, all i need is adress to send the payment to and was wondering aboout shipping cost and turnaround,
thanks!
thanks!
#35
Junior Member
Join Date: Jul 2004
Location: chicago
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: monte carlo ss
Engine: l98
Transmission: 200r4
Re: BBSDesigns Turbo Headers; The Last Run
I'm a little confused... I have a serpentine belt setup. and would like to keep my ac...So do I have to go with a v belt setup to keep ac and run your kit or do you make a kit for serpentine belt system and ac.....If so what kind of extra work needs to be done to keep ac......
#37
Senior Member
Join Date: Apr 2002
Location: Northern New Jersey
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
I'm a little confused... I have a serpentine belt setup. and would like to keep my ac...So do I have to go with a v belt setup to keep ac and run your kit or do you make a kit for serpentine belt system and ac.....If so what kind of extra work needs to be done to keep ac......
Also.. Since this is the LAST run Im gonna go for it and say put me down for 3) Street & Strip Twin Turbo Headers. I'm email you Edwardo with my info...
When the time comes I'll have the money for you...
Dan
#38
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
Yes, unfortunately I have to stop making headers and get my hands full in my new business. I am making this last run because I always receive emails from people asking me for headers, even when I stopped making them a while ago. So I thought about it and decided to make this last run for orders that enter (payment received)no later than June 30th. Why June 30th? Well, I really dont have time to make headers anymore, so until June 30th all orders that enter will start fabrication all at once.
#39
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
PO Box 11803 San Juan, P.R. 00922-1803
Official time for fabrication will start just after June 30th. Orders will be made in the order they come in. Al Lipper from Illinois is the first to receive his turbo header. Fabrication for each piece is about 3-5 days. Most quotes for shipping are $30.00 for Parcel Post and $58.00 for Priority Mail for the US main land. Alaska and Hawaii are not included. All other countries should email for a shipping quote.
#40
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
If I remeber well the only difference are the heart shaped exhaust ports, everything else is just right on.
#41
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
Important; the headers are designed to fit on a 3rd gen, never tried by myself on a 4th gen.
Last edited by BBSDesigns; 06-11-2007 at 01:39 PM.
#42
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
I'm a little confused... I have a serpentine belt setup. and would like to keep my ac...So do I have to go with a v belt setup to keep ac and run your kit or do you make a kit for serpentine belt system and ac.....If so what kind of extra work needs to be done to keep ac......
Ok, You have two alternatives to run turbo and with A/C with you serpentine belt setup;
#1 keep your serpentine belt setup and get the street & strip twin turbo header kit.
#2 Change to V belt and get the race single turbo header kit. Remember that you need to swap the entire belt setup including the water pump.
#43
Junior Member
Join Date: Jun 2003
Location: East Norriton PA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 iroc 89 pearl white' black 06gto
Engine: 350 Procharged AFR, T76 383 miniram
Transmission: 700r4, 700r4, LS2 t56
Axle/Gears: 3.73
Re: BBSDesigns Turbo Headers; The Last Run
pm sent and email sent
#44
Member
Join Date: Nov 2003
Location: upstate new york
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
hey BBS designs, i sent a certified bank check with shipping included, this morning(june 12th)
i was just wondering if you could email me or PM me when you get my check just so i know it got there, and i'll have a rough idea of when i could expect it, thank you.
Keith Burch
i was just wondering if you could email me or PM me when you get my check just so i know it got there, and i'll have a rough idea of when i could expect it, thank you.
Keith Burch
#45
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
hey BBS designs, i sent a certified bank check with shipping included, this morning(june 12th)
i was just wondering if you could email me or PM me when you get my check just so i know it got there, and i'll have a rough idea of when i could expect it, thank you.
Keith Burch
i was just wondering if you could email me or PM me when you get my check just so i know it got there, and i'll have a rough idea of when i could expect it, thank you.
Keith Burch
No problem
#46
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: BBSDesigns Turbo Headers; The Last Run
For all of you interested the address is:
PO Box 11803 San Juan, P.R. 00922-1803
Official time for fabrication will start just after June 30th. Orders will be made in the order they come in. Al Lipper from Illinois is the first to receive his turbo header. Fabrication for each piece is about 3-5 days. Most quotes for shipping are $30.00 for Parcel Post and $58.00 for Priority Mail for the US main land. Alaska and Hawaii are not included. All other countries should email for a shipping quote.
PO Box 11803 San Juan, P.R. 00922-1803
Official time for fabrication will start just after June 30th. Orders will be made in the order they come in. Al Lipper from Illinois is the first to receive his turbo header. Fabrication for each piece is about 3-5 days. Most quotes for shipping are $30.00 for Parcel Post and $58.00 for Priority Mail for the US main land. Alaska and Hawaii are not included. All other countries should email for a shipping quote.
#47
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Isla del Encanto, P.R.
Posts: 608
Likes: 0
Received 3 Likes
on
2 Posts
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
IMPORTANT!!!!!!!!!! Please Read:
If sending a money order or check, please make it payable to Edgardo Bermudez, not BBSDesigns. The thing is that I closed that bank account so I might not be able to cash out checks or money orders.
Also if using Paypal I will have to add a fee for that since they will take money from me, about $30.00 fee for every $1200.00 hence $15.00 fee for every $600.00 more or less.
Thanks
If sending a money order or check, please make it payable to Edgardo Bermudez, not BBSDesigns. The thing is that I closed that bank account so I might not be able to cash out checks or money orders.
Also if using Paypal I will have to add a fee for that since they will take money from me, about $30.00 fee for every $1200.00 hence $15.00 fee for every $600.00 more or less.
Thanks
#48
Member
Join Date: Jul 2003
Location: sw michigan
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 gta
Engine: 5.slow turbo
Transmission: tremec tko
Re: BBSDesigns Turbo Headers; The Last Run
how many orders have you gotten so far? do you have a website i can check out? i'm just waiting for a check to clear then i'll be ordering, i'll probably use paypal. gonna make a great fathers day present for myself!!
#49
Senior Member
Join Date: Apr 2002
Location: Northern New Jersey
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
Dan