Nitrous on this combo?
Thread Starter
Junior Member
Joined: Sep 2006
Posts: 42
Likes: 0
Car: 1988 Camaro 11.08s / 130.5mph
Engine: 383 HSR
Transmission: 700 R4
Axle/Gears: 9-bolt 3.27
Nitrous on this combo?
I´m thinking of adding nitrous to my engine but I have concerns about my bottom end. It´s a 1988 Camaro with 2 bolt 350.
I have stock cast crank, stock rods and hyper FT pistons with moly rings.
Rebuilt with new bearings all over.
Other mods are:
XFI268 cam
Brodix IK180 heads
HSR intake and 58mm TB
Headers and free flowing dual 2.5" exhaust
upgraded fuel pump, DUI ingnition parts
Estimated hp now is in the range of 375-400.
Looking into a NOS 05151 wet system and would like to run a 100hp shot in the 4000-6000 rpm range with the proper safety equipment like fuel pressure switch, lower ignition etc.
Do you think this will fairly safe or shall I forget it right away?
Thanks!
I have stock cast crank, stock rods and hyper FT pistons with moly rings.
Rebuilt with new bearings all over.
Other mods are:
XFI268 cam
Brodix IK180 heads
HSR intake and 58mm TB
Headers and free flowing dual 2.5" exhaust
upgraded fuel pump, DUI ingnition parts
Estimated hp now is in the range of 375-400.
Looking into a NOS 05151 wet system and would like to run a 100hp shot in the 4000-6000 rpm range with the proper safety equipment like fuel pressure switch, lower ignition etc.
Do you think this will fairly safe or shall I forget it right away?
Thanks!
Joined: Oct 2000
Posts: 2,112
Likes: 0
From: Orange County,NY
Car: 1982 Z28
Engine: 355
Transmission: T56
Axle/Gears: 12 Bolt
Senior Member
iTrader: (8)
Joined: Aug 2007
Posts: 1,341
Likes: 0
From: Southern Wisconsin
Car: 1988 Camaro
Engine: 383 Stroker
Transmission: Probuilt 700 R4
Axle/Gears: 3.73
Re: Nitrous on this combo?
The next thing your going to have to worry about would be the tranny and rear end, if they are still stock
Thread Starter
Junior Member
Joined: Sep 2006
Posts: 42
Likes: 0
Car: 1988 Camaro 11.08s / 130.5mph
Engine: 383 HSR
Transmission: 700 R4
Axle/Gears: 9-bolt 3.27
Re: Nitrous on this combo?
Thanks!
The tranny is a rebuilt/stronger 700R4 and my rear end is a 9-bolt 3.27 in good shape.
We´ll see how long they last
BR
The tranny is a rebuilt/stronger 700R4 and my rear end is a 9-bolt 3.27 in good shape.
We´ll see how long they last
BR
Thread
Thread Starter
Forum
Replies
Last Post
roysatikas
Transmissions and Drivetrain
0
Sep 22, 2015 08:15 PM