Whats your 1/4 times with prochargers?
stock 14.54 @ 93mph with K&N's and a cutout with 2.77 gears on potenza tires
12psi blower
ported maf
edeljunk headers
same gear (broke when i hit second gear at run below)
13.1 @ 110mph
Never got a 12 second ET but i was chasing fuel problems, otherwise the car had the power to go about 12.40s@113 or so with my 3.08 crappy gear
I did however manage a 1.70 60' with a crappy 2200 12" stall and those 3.08 gears, but the car died after the 60' foot. That would've been a good mid 12
12psi blower
ported maf
edeljunk headers
same gear (broke when i hit second gear at run below)
13.1 @ 110mph
Never got a 12 second ET but i was chasing fuel problems, otherwise the car had the power to go about 12.40s@113 or so with my 3.08 crappy gear
I did however manage a 1.70 60' with a crappy 2200 12" stall and those 3.08 gears, but the car died after the 60' foot. That would've been a good mid 12
Well I got to run mine today. It was dissapointing, it should have been around 11.50, but I only managed 12.01 at 119. The 60ft was a pitiful 2.05, but it was not from spinning. I belive the convertor is way too tight and it is just bogging off the line until it gets to about 4000 then it runs.
Oh well I didn't have to worry about traction.
Oh well I didn't have to worry about traction.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM
Street Lethal
Power Adders
634
Apr 30, 2019 12:14 PM




