how do i make a signiture
TGO Supporter
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
go here and load the pic to you readers ride.
https://www.thirdgen.org/rides/
after thats done go ahead and see your ride.
then after that right click on the pic goto properties and save the address by copying it.
after that go bak to you user cp on the message boards
and then goto opition, after that in the sig area, you need to use this code
[ img ]paste the address of the pic from readers rides here[ /img ]
that how i did mine, just take out the spaces between the brackets are url on both sides [img
good luck.
https://www.thirdgen.org/rides/
after thats done go ahead and see your ride.
then after that right click on the pic goto properties and save the address by copying it.
after that go bak to you user cp on the message boards
and then goto opition, after that in the sig area, you need to use this code
[ img ]paste the address of the pic from readers rides here[ /img ]
that how i did mine, just take out the spaces between the brackets are url on both sides [img
good luck.
Last edited by MdFormula350; Feb 8, 2003 at 10:11 AM.
Supreme Member
Joined: Jul 2001
Posts: 2,760
Likes: 0
From: Cove, Arkansas
Car: 85 Camaro SC
Engine: V6
Transmission: 700r4
Hmm not working properly yet. You need to view your reader rides, and click to enlarge on your pic then when the new screen opens up you can right click on your pic and go down to the properties and get the hyperlink "ie. www.thirdgen.org/readerrides/image......
Then you need to put that in your sig with the [ img ] hyperlinks to remote link your pic
Then you need to put that in your sig with the [ img ] hyperlinks to remote link your pic
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM