When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys i just picked up a 4th gen washer tank reservoir for my 3rd gen and the install seems pretty simple. The question i had is about the pump that is located on the 4th gen reservoir. I was wondering do i keep that mounted and run a longer hose to that pump or do i remove that pump and just run the hose inside the reservoir? If i do in fact use that pump how do i wire it. I havent looked to much at my stock reservoir but from what i recall there isnt a pump located on the stock tank, it just has the hose going into the cap and a hose pickup on the inside? Any clearification would be great. Thanks in advance
Alright well i figured it out myself. I ended up removing the pump from the 4th gen tank and running a hose into where the pump was at. Everything is working great and it looks so much better then a big tank sitting on the fender.
