So

you know how when you go on Facebook now it brings up an old pic and asks if you want to share your memories? Well the other day it brought up a pic I posted when I started the motor swap on my 91...5 years ago! And the car is still sitting Well after 10 years of never finishing my old 86, I'm thinking I don't wanna keep another unfinished project around. Plus it'll be a long time before I have time for more than one project at a time, and the IROC really needs a motor this year. So with all that said... Car is in decent shape overall. A good wash and wax it's a "20 foot" car all day Car is black, and has a 99% swapped in red interior in pretty good shape. Was gonna eventually have the seats redone in leather, but the cloth ones are nice with no tears. Have a brand new carpet from year one for it. Body is solid. Drivers floor is just starting to rust. No replacement needed, just clean off and paint. I'll try to get a couple pics up when I get home this weekend. I'll start with an asking price of 1500. Why so much for a roller? If I get a close offer I'll keep the chrome SS wheels on it with usable tires. Otherwise it gets the stock wheels with junk tires. For 2800 I'll keep the t56 in it too. I will NOT sell the trans separate without selling the car first. I already gotta pull the motor back out

 

So nobody looking for a roller?? Is my price too high or because I don't have any pics? I will sell it for the right price, but I'm not gonna pull the motor out without a buyer...

 

The way it's been sitting now for 5 years😞 If body gets sold that motor is going in the IROC😃

 

Post pics of interior please.

 

Where in PA are you located?

What year is the T56 out of?

 

Interested I sent you a pm

 

Last fall my old phone crashed and I lost hundreds of pics. I found these on my Facebook page luckily. T56 is from an LT1 car. 96 I think.

 

Sent you a pm

 

How many miles on the body? Clean title not salvage?

 

So did I and he doesn't respond don't waste your time

 

Jeez, tough crowd, lol! Sorry, haven't been back on since I posted the interior pick the other day...

 

Damnit I really need this roller.

 

I'll be around all weekend , you have my number give me a call .maybe we can get together this weekend.

 

Damn, if only you weren't over 7hrs away....

 

How many miles on the body..

 

Hey guys, I want to apologize for being MIA! Been way more busy than normal the past couple weeks! Gonna hold off on pulling the motor for at least a month or 2. I just don't have the time right now. I see there are people interested, I'll get to my PM's after dinner. Yes, dinner at 9 o'clock, lol. Again, sorry...

 

I

wanted to post again tonight for 2 reasons... Number one, I don't want people(especially the moderators) to think I wasn't seriously looking for an offer when I put this out there. The reason I've been so busy lately, and will be for weeks yet, is this pic. My dad and I are building a garage for the trucking business. Been working on it all summer and need to finish it. Second reason I'm posting another comment... To any moderator reading this... Why does this site not have a general discussion forum? There's a wealth of automotive knowledge here besides third gen stuff that could be shared. Do we all own only third gen f-body's? Are there not a lot of folks here in some aspect of the auto business? Just wanted to throw it out there. Anyway, here is the building we're working on. 100 x 100, and yes, I will be putting my fully equipped garage in

 

Where in PA are you located? i'm interested

 

He is about 20 miles south of allentown, he steays right near me

 

Where at? That description puts him real close to me.

 

He lives off of 113 near creamery pa I used to own that car it's super solid and he's a good guy. Have any of the original interior parts left I need some black trim?

 

Think i talked to you at some point pretty close to to me anyways our shop is right by taco bell on 309 i have some black trim collecting dust what do you need

 

So once again I apologize for being MIA for a while! Thanks for the props Jay! Anyway, logged in tonight and saw I had a bunch of messages! Rather than type the same reply 6 times, figured I'd post here. Pulling back for now on yanking the motor and parting it. Decided before I tear it apart I wanna hear that motor run. I paid $4500 for it! And I'm in talks with somebody about helping me make it run. Not gonna publicly throw a fellow member here under the bus by their screen name, but Chris, it's because of you I changed my mind, lol! This car is worth at least 4k in parts before the motor even if the motor isn't what it's supposed to be! Thanks all for the interest and I will let everyone know what I end up doing with it...

 

The door sill trim

 

It's all good brent i don't mind being called out . Glad to hear you gonna get it running . If you end up going with the fast ez efi let me know if you need any help mines been up and going a year now if i can help with anything let me know and definitely let me know if you decide to do something with it I'm still interested

 

Jay i have black sill plates and some good upper door panel trim let me know if you want them I'll treat you good on them

 

No hard feelings Chris, in your situation I'd be trying to drive the same bargain you were, lol! If the moderators want to they can delete this post. Or let it on so I can show off my new garage, lol