When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a truck load of third gen interior parts and pieces. I have trunk carpets, console tops, console bottoms, and all the plastics.
Before I get into what I have (and dont have) I must first say that the prices are all FIRM. I hate haggling so it wont happen here. Please do not contact me and ask "what do you have." Look at the pix and if you need something that is not pictured you are welcome to ask if I have it somewhere.
The console tops and bottoms can be mix match and you can choose from fair to good to excellent and create your own combo. Pay close attention to the consoles. Some have the square holes for switches and one of them does not. There's one super rare one in there with a clock in the middle. Could be turned into a cup holder? prices for console tops range from $30 for fair to $50 for good and $80 for excellent. Even though there are lids in the pix the LIDS ARE NOT INCLUDED in the prices I just quoted. Lids are the same price. $30 for fair, $50 for good and $80 for excellent. The bottoms are all good and excellent except one that is broken but could easily be fixed and then would be excellent. One gray one has poor carpet but I have a nice carpet you can buy for $10.
The grey plastics are good condition (not excellent) and the whole set if $125. The black plastics in this ad are all for convertibles and each piece is $40.
I have trunk carpets. 2 of each color. The 2 black are very good but not excellent. Those are $40 each. One grey is fair and thats $25 and one gray is very good and thats $40.
I have 3 black tail plastics. Two are for standard cars those are $30 each and one is for the cars with the rear well covers usually came in the cars with the Bose system but some cars came with those rigid covers without Bose. That tail plastic is $60 (very hard to find).
I am located in Martinez CA about 3o miles east of Oakland. You MIGHT be able to talk me into shipping an item like a c
onsole lid if its not real big.
No sorry, I should have specified. All my stuff is black and grey. I just saw a real nice red interior at a pick n pull a while back. I should start snagging that stuff. Not everybody wants it but when someone needs it they can be hard to find
Interested in the console with the clock. Could you Text me some more pictures (331-205-9916)
Will try to do that today. I honestly don't know if the clock itself works but things like that are usually easy to fix. I've never seen a console like that one. I wonder if anybody knows if theres an RPO code for it?
Will try to do that today. I honestly don't know if the clock itself works but things like that are usually easy to fix. I've never seen a console like that one. I wonder if anybody knows if theres an RPO code for it?
They are more common then you think. The RPO code for these are U35 Clock, Quartz.
They are more common then you think. The RPO code for these are U35 Clock, Quartz.
Thx. Good to know. I'll bet I've been in at least 200 cars in the junk yards and I've not seen one of these. This one came out of an 85. I wonder if the reason I haven't seen many is that I'm always digging into the 87 and up. Was this offered 87 and up?
Here is a typical used 5 speed plate. The price on this one is $75. NOTE: the leather boot on this one is toast and boots are never included in the price I quote anyway. I do have a few original boots but they show their age. A brand new reproduction plate is $159. It is super hard to find these with zero corners broken off. All the corners are intact on this one. But this one is not perfect. There are 3 minor blemishes on it that I tries to photograph. Also, ALL these used plates will need to be thoroughly scrubbed and then "dyed" with SEM plastic dye. Use landau black color. Do not use black spray paint it gums up the micro texture. And lastly you will need a shift indicator overlay from Hawks Third Gen. I included a pic of that and the link to that item is here.
Private message me with your email address and I'll just send the pix direct to you. I have two plates that I have access to now. The rest are in storage and tough to get to. One plate is fair with a few scratches and flaws that one is $75. The other is near perfect except one minor spot and the lettering is still quite good on it too. That one is $100. As I said, PM me and give your email address and I'll send pix.
"I have 3 black tail plastics. Two are for standard cars those are $30 each and one is for the cars with the rear well covers usually came in the cars with the Bose system but some cars came with those rigid covers without Bose. That tail plastic is $60 (very hard to find)."
If the Black rear panel for the bose lid is a 86-90 (with electric pad on top) I would happily take it.....however it would need to be shipped....to the UK... will pay $70+ shipping ?
I'll do my best to try to figure out what the shipping cost is. There is a local guy who wants it as well and has been buying other stuff from me so Im waiting to hear from him on it. Please note that it is scratched up on the drivers side lower quadrant.
neilcase, do you plan on responding to any of my messages i have sent you after you sent me parts that had damage that was not described and missing brackets?
