When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ConvertiblesDiscussed here are problems and solutions to convertible specific questions, including difficult to find part numbers and other convertible tech help.
In addition to the minor repairs I plan on
Installing power seat (also plan on swapping in GTA seats)....complete digital dash.....steering wheel controls....
My doner car is a digital dash 88 GTA .....{was TPI but PO removed it and put a carb on}
I'm in the process of stripping it now...dash...entire harness...steering column.....a/c harness......
My question is about the a/c controls and a/c box....?
Do I have to replace entire box or just harness and vac lines....?
Thank you
I like digital gauges.......
Favorite TV show was Knight Rider...
KITT..... computerized digital dash.....
I've built two KITT Trans Ams.....
So now I'm looking for a Pontiac version of KITT
GTA digital dash fits the bill but I also want it in my vert....
Need a cluster ( that works )
TPI engine harness from a digital dash car ( 1988 )
Or can I use 1991 engine harness with the digital dash
Does the digital dash function 100%? Reason I ask is the entire wiring harness is different and has different sensors front to back from the analog gauge cars. Honestly I would think long and hard about that decision before you start pulling that vert apart to do that conversion.
From: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: My new vert
The Digital Dash conversion may be more than you anticipate. There are sensors on the doors, on the hatch and the sending units for the sensors might be different. I was going to swap a Digital Dash in my 83 Riviera (yes it was an option) until I looked into it, the job was almost impossible without a ton of work.
Cool idea, but keep in mind it is not a weekend swap. If you do it, replace all of the wire looms and check all of your wires while you are going through it.