[NY] Moates Chip Programming Equipment

Thread Tools
 
Search this Thread
 
Old Apr 7, 2018 | 06:02 PM
  #1  
renegade69's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Mar 2011
Posts: 2
Likes: 1
Moates Chip Programming Equipment

SOLD/No Longer Available


Hello. I have a Burn 1 chip programmer and Xtreme ALDL USB Data logger with all required cables and 2 unused chips. Will sell as 1 package.
$125 shipped lower 48


Last edited by renegade69; Apr 10, 2018 at 10:07 AM. Reason: Sold
Reply
Old Apr 9, 2018 | 11:46 PM
  #2  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

What else would I need? A copy of Tuner Pro? This is for a 89 TPI Z28
Reply
Old Apr 9, 2018 | 11:58 PM
  #3  
renegade69's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Mar 2011
Posts: 2
Likes: 1
Re: Moates Chip Programming Equipment

Yes,Tuner Pro RT. There is a wealth of knowledge on this forum. DIY/PROM section. I never got around to programming chips for my car.
Thanks
Reply
Old Apr 10, 2018 | 12:02 AM
  #4  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Moates Chip Programming Equipment

I don’t see the value here new pricing is lower than your asking $225 price!

Reply
Old Apr 10, 2018 | 12:07 AM
  #5  
renegade69's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Mar 2011
Posts: 2
Likes: 1
Re: Moates Chip Programming Equipment

Thanks for bringing it to my attention. I thought I put $125 the other night. Price has been adjusted.
Reply
Old Apr 10, 2018 | 12:14 AM
  #6  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Moates Chip Programming Equipment

Great deal
Reply
Old Apr 10, 2018 | 12:15 AM
  #7  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Moates Chip Programming Equipment

Originally Posted by Stuman
What else would I need? A copy of Tuner Pro? This is for a 89 TPI Z28
You would want a moates.net g1 and maybe consider a hdr1.
Reply
Old Apr 10, 2018 | 07:54 AM
  #8  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

I am interested in the equipment. Please PM me. Thanks
Reply
Old Apr 10, 2018 | 07:55 AM
  #9  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

Thanks for the info.
Reply
Old Nov 14, 2018 | 11:26 AM
  #10  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Moates Chip Programming Equipment

Asking for a friend.
You marked it as sold but was that both items ? Is the burn 1 still available, if it is how much for just the burn 1 without the aldl cable.

Last edited by Tuned Performance; Nov 14, 2018 at 11:32 AM.
Reply
Old Nov 14, 2018 | 11:40 AM
  #11  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

Hey Tuned, I purchased the Burn1 and the ALDL data logger from him in August. During our conversation I found out he had a Stealth Ram that wouldn't clear his Corvette hood and I also purchased that from him. It had been spray painted black. I bead blasted it and it looks brand new ready to go on my new motor hopefully this spring.
Reply
Old Nov 14, 2018 | 11:43 AM
  #12  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Moates Chip Programming Equipment

Thanks stuman, you need to start a thread with pics of your project.
Reply
Old Nov 14, 2018 | 12:02 PM
  #13  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

Yea, I posted several pics a couple days ago in a "T-56 shifter hole thread" as I just got that done weekend before last. Supposed to start under the dash this weekend, taking brake pedal out making hole for clutch master and installing the clutch and brake pedal.
Reply
Old Nov 16, 2018 | 12:47 PM
  #14  
renegade69's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Mar 2011
Posts: 2
Likes: 1
Re: Moates Chip Programming Equipment

Yeah Stuman. Post some pics.
Reply
Old Nov 16, 2018 | 05:57 PM
  #15  
Stuman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 60
Likes: 0
From: Lexington SC
Car: 1989 Z28 Camaro
Engine: removed 406 building 383
Transmission: 700R4 swapping to T56
Axle/Gears: Ford 9" 3.70 going to 4.10 or 4.30
Re: Moates Chip Programming Equipment

Hey renegade, good to hear from ya. I think I will start a thread with some of my disassembly and cleaning pics up to the point I'm at now and I can add to it as the fun stuff , engine and trans, starts happening in the next months. I try to get started this weekend or first of the week as I'm on vacation.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TPI-Formula350-
Engine/Drivetrain/Suspension Parts for Sale
5
Jul 8, 2014 04:38 PM
87irocruns13
Engine/Drivetrain/Suspension Wanted
1
Aug 13, 2008 04:25 PM
AntiVTEC
V6
8
Sep 5, 2003 09:37 PM
JAKEDPLAYA
DFI and ECM
8
Apr 18, 2003 11:15 AM




All times are GMT -5. The time now is 02:59 PM.