[NJ] 85 drag car partout.
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
Sparco evo2 seat and 5pt harness, nce shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm m
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon county NJ
-Phil
***Chassis now being parted
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
Sparco evo2 seat and 5pt harness, nce shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm m
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon county NJ
-Phil
Last edited by //<86TA>\\; Jul 31, 2018 at 05:35 PM.
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Last edited by //<86TA>\\; Jul 31, 2018 at 05:36 PM.
Joined: May 2013
Posts: 1,493
Likes: 98
From: CT
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: 700r4
Axle/Gears: 9 Bolt Torsen 3.70
Re: 85 drag car partout.
I'm interested in the hood but don't trust my jeep to drive it from CT to NJ, I know its a huge pain but would you be interested in shipping?
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Your a little over 2hrs from me, i could drive it to you for less than shipping, but it won't fit in my car and I don't want to drive my Jeep that far either, lol.
Let me see what I can do.
Let me see what I can do.
Trending Topics
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
I won't separate it at this price. Sounds like you would be better off just getting a new houses ng and axle package, last time I looked the were still under a grand.
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: 85 drag car partout.
-- Joe
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Want a title? Post!
Joined: Nov 2016
Posts: 0
Likes: 0
From: SPb, Russia
Car: Firebird T/A GTA 88 hardtop
Engine: SBC 350 tpi
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
No I won't ship overseas, sorry
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Yes I will part the chassis
Senior Member
Joined: Jan 2005
Posts: 782
Likes: 0
From: Port Angeles, Wa
Car: 1983 Camaro Z28
Engine: 584
Transmission: TSI Glide
Axle/Gears: Quick performance 9 inch
Re: 85 drag car partout.
Very interested in the fuel tank! I didn't see any pics though. Can you send pics of it to me? Nice and clean inside? Rusty?
Pm me and I'll shoot you my email. Thanks!
Pm me and I'll shoot you my email. Thanks!
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Pulled the tank, clean inside and out.
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
They are stepped 1 7/8 to 2". They are made for these cars, they are for Stahl pattern sbc heads, not standard sbc heads
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Hood and passenger side door sold
Joined: Mar 2004
Posts: 1,643
Likes: 50
From: Manitoba
Car: '91 GTA
Engine: 421sbc
Transmission: Powerglide
Axle/Gears: Ford 9" with 3.89
Re: 85 drag car partout.
Can you post pics of the Bmr Trac pack style full adjustable torque arm?
Junior Member
Joined: Jun 2016
Posts: 2
Likes: 0
From: New Hampshire
Car: 1984 camaro z28
Engine: 5.7L
Transmission: T5 s speed
Axle/Gears: Not sure yet
Re: 85 drag car partout.
Do you still have the torque arm? How much would it be to ship it to 03561? I am seriously interested in it.
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Probably 45-50$ based on the last couple shipments
Junior Member
Joined: Jun 2017
Posts: 2
Likes: 0
Re: 85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
It's sold , I didn't remove the pic
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
The newest 3rd gen is 26 years old, so yeah, any original parts will most likely be showing their age
Member
Joined: Aug 2015
Posts: 147
Likes: 1
From: Columbia, SC
Car: 1989 Camaro RS
Engine: 383
Transmission: TH400
Axle/Gears: 9 inch, 35 spline drag spool,4.56
Re: 85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
Yes the brakes are available
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
.
Last edited by //<86TA>\\; Jul 9, 2018 at 10:02 PM.
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
No it's gone, was for a th400 anyway
Joined: Aug 2011
Posts: 413
Likes: 1
From: Plaistow,NH
Car: 92 Camaro Z
Engine: LS 5.3 LM7
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Re: 85 drag car partout.
Hello, do you still have the adjustable torque arm and driveshaft loop? If you do how much are you asking for it?
Thanks
Pat
Thanks
Pat
Senior Member
Joined: Mar 2014
Posts: 571
Likes: 10
From: Indy
Car: 88 IROC-Z
Engine: GEN 4 LY6 (going forged 408)
Transmission: 60E (going RPM LEVEL 6 4L80E)
Axle/Gears: 7.5" 3.42 (staying...)
Re: 85 drag car partout.
Are the back quarters rust free? I need both lower rear sections, and the rear passenger side rocker arm mounting are sheet metal.
IF the passenger side rocker box (the frame) ill take that too if its not rusted.
<- restoring my high school car...
IF the passenger side rocker box (the frame) ill take that too if its not rusted.
<- restoring my high school car...
Thread Starter
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: 85 drag car partout.
I think the driverside is good, the passenger side kissed a wall and has rotting in the spare tire well.
Joined: Aug 2011
Posts: 413
Likes: 1
From: Plaistow,NH
Car: 92 Camaro Z
Engine: LS 5.3 LM7
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Senior Member
Joined: Mar 2014
Posts: 571
Likes: 10
From: Indy
Car: 88 IROC-Z
Engine: GEN 4 LY6 (going forged 408)
Transmission: 60E (going RPM LEVEL 6 4L80E)
Axle/Gears: 7.5" 3.42 (staying...)