1986 Camaro Black Interior Plastics & More In Pensacola FL

Thread Tools
 
Search this Thread
 
Old Aug 23, 2013 | 12:52 PM
  #1  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
1986 Camaro Black Interior Plastics & Dash Stuff In Pensacola FL

Hey Guys I have some interior plastics out of a 1986 Camaro I'm looking to sell. This is not a complete set and the parts have wear and tear. I'm currently wanting to clean out the interior of my parts car and this stuff is just taking up space. Keep in mind that I don't have stuff for T-top cars or anything specifically I-ROC or Z-28.

**All I have now are the large rear interior plastics, manual seat tracks, and dash stuff. I don't have any door panels, front plastics, headliner, sail panels, or carpet.**

Feel free to shoot me an email with what you are looking for at ss4crimefighting@gmail.com and let me know you're form thirdgen.org! I have body parts I'm selling on craigslist and I don't want to confuse you with somebody from CL!

Check out my other ads on the forum!
https://www.thirdgen.org/forums/exte...ellaneous.html
https://www.thirdgen.org/forums/engi...6-2-8-mfi.html
https://www.thirdgen.org/forums/exte...heetmetal.html

MASTER LIST
Spare Tire Cover-$20 (Carpeting sold.)
Passengers side interior quarter-$20 (Carpeting sold.)
Passengers side under dash panel-$10
Drivers side interior Quarter-$30 (Carpeting sold.)
Drivers side A-pillar trim-SOLD!!!
Passengers side A-pillar trim-SOLD!!!
Radio and A/C control bezel -$8
B-pillar trim-SOLD!!!
Roof Console-SOLD!!!
Manual Seat Tracks -$40 for a set, $80 for all and $20 for one. (Ones in the front are out of my '86. The other set is out of a '91 RS.)
A/C vents-$8 each or $48 for all (One of the center vents has a broken fin. The rest operate as they should. These will need the floppy vent fix.)
Gauge Cluster Trim-$40 (This piece will swap into all '82-'89 Camaros.)
U21 instrument cluster-SOLD!!!
Steering Column Dash Trim-$10
Cantral A/C Duct-$30
Middle Vent A/C duct-$20
Drivers Side A/C Duct-$20
Passengers Side A/C Duct-$20
Drivers Side Window Defrost Duct-$10 (2 of the screw tabs are broke.)
Passengers Side Window Defrost Duct-$10
Interior Heater Box-$80 (Missing the blend lever, Heater core needs flushed out. Came out of an A/C car.)

Let me know what you are looking for and I'll try my best to come up with it.
Thanks!




Attached Thumbnails 1986 Camaro Black Interior Plastics & More In Pensacola FL-camaro-interior-sale-2.jpg   1986 Camaro Black Interior Plastics & More In Pensacola FL-camaro-interior-sale-update   1986 Camaro Black Interior Plastics & More In Pensacola FL-camaro-seat-tracks-1024x768.jpg   1986 Camaro Black Interior Plastics & More In Pensacola FL-sc-heater-box-1024x768.jpg  

Last edited by '86 Sport Coupe; Jun 22, 2020 at 04:34 PM. Reason: A-pillar trim sold
Reply
Old Aug 29, 2013 | 11:35 AM
  #2  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

More pictures of what I have for sale.

The lot of dash stuff.



Lot of the A/C ductwork.

Attached Thumbnails 1986 Camaro Black Interior Plastics & More In Pensacola FL-dash-piece-parts-lot   1986 Camaro Black Interior Plastics & More In Pensacola FL-camaro-ac-ductwork-1024x768.jpg  

Last edited by '86 Sport Coupe; Jun 22, 2020 at 04:36 PM. Reason: This is now a post for more pictures
Reply
Old Aug 29, 2013 | 10:34 PM
  #3  
91rs-t-tops's Avatar
Junior Member
 
Joined: Dec 2012
Posts: 97
Likes: 0
From: Near Springfield, Missouri
Car: 91 Camaro Rs
Engine: 3.1 v6
Transmission: 700R4
Axle/Gears: 3.23
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

how much to ship door sills to 65711
Reply
Old Aug 30, 2013 | 09:08 AM
  #4  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

@91rs-t-tops Door sills have been called for at the moment. if anything changes I'll let you know.
Reply
Old Sep 4, 2013 | 02:10 PM
  #5  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Special thanks to fellow member Celts20 for practically cleaning me out. Gonna update my list and pictures with some new stuff in a couple of days. If what your looking for is not listed then just ask.
Reply
Old Sep 11, 2013 | 12:21 PM
  #6  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Motivated seller. I'd love to see this stuff put to use instead of sitting around collecting dust. Let me know what you are looking for!
Reply
Old Sep 30, 2013 | 09:13 AM
  #7  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Looking to get rid of this stuff. Let me know what you need. This stuff needs to go back on good cars!
Reply
Old Oct 4, 2013 | 08:53 PM
  #8  
Maverick H1L's Avatar
Supreme Member
iTrader: (8)
 
Joined: Aug 2003
Posts: 7,240
Likes: 6
From: LeRoy, NY
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Do you have the bigger carpet and the headliner?
Reply
Old Oct 5, 2013 | 10:48 AM
  #9  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by Maverick H1L
Do you have the bigger carpet and the headliner?
I do not have those. Sorry about that.
Reply
Old Oct 12, 2013 | 02:46 PM
  #10  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. This is some loose stuff I'd like to clean up. It would be thrilling to see it go back on good cars! Let me know what you need.
Reply
Old Oct 26, 2013 | 05:38 PM
  #11  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Still looking for people needing this stuff. I'd rather not see it sit here any longer.
Reply
Old Nov 7, 2013 | 06:01 PM
  #12  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Looking for any interested parties. This stuff needs to live on in running cars!
Reply
Old Nov 8, 2013 | 08:59 AM
  #13  
jjcuff1's Avatar
Member
 
Joined: Aug 2006
Posts: 484
Likes: 0
From: Tampa, FL
Car: 1988 Iroc-Z Red T-tops
Engine: 305 TPI LB9 55k miles
Transmission: Auto 700r4
Axle/Gears: 2.73 posi
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

The center console padded aremrest cover in good shape
I am looking for overhead console for ttop car,
Also the automatic shifter plate the one simple top plate with PRNDL on it in good shape, mine the ribs are missing

to tampa, fl
Reply
Old Nov 8, 2013 | 10:52 AM
  #14  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by jjcuff1
The center console padded aremrest cover in good shape
I am looking for overhead console for ttop car,
Also the automatic shifter plate the one simple top plate with PRNDL on it in good shape, mine the ribs are missing

to tampa, fl
I don't have a padded armrest for the center console.
I don't have any automatic shiftier plate stuff. I sold mine locally awhile ago.
The overhead console I have is off of a Hardtop car. I'm not sure if it would work with a T-top car.
Reply
Old Nov 27, 2013 | 05:17 PM
  #15  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. have a few sales pending ATM. let me know if something catches your eye.
Reply
Old Dec 13, 2013 | 03:41 PM
  #16  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Sold a few things and looking to sell some more. Let me know what you need!
Reply
Old Dec 31, 2013 | 03:44 PM
  #17  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Looking to sell some more. I'd be thrilled to see this stuff go back on good cars!
Reply
Old Dec 31, 2013 | 06:49 PM
  #18  
Mirror Image's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2003
Posts: 859
Likes: 5
From: Birmingham Alabama
Car: 1991 Firebird convertible
Engine: LQ4 ls 6.0
Transmission: 4L60E
Axle/Gears: 342 Limited slip
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Did you sell the sill plates and kick panels
Reply
Old Dec 31, 2013 | 08:24 PM
  #19  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by Mirror Image
Did you sell the sill plates and kick panels
Those were the first things that sold when I originally posted this ad on here. Sorry about that. Anything else I have that you may be interested in?
Reply
Old Dec 31, 2013 | 09:33 PM
  #20  
Mirror Image's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2003
Posts: 859
Likes: 5
From: Birmingham Alabama
Car: 1991 Firebird convertible
Engine: LQ4 ls 6.0
Transmission: 4L60E
Axle/Gears: 342 Limited slip
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Not sure yet but I may need a set of black seat belts if you have them
Reply
Old Jan 1, 2014 | 12:18 AM
  #21  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by Mirror Image
Not sure yet but I may need a set of black seat belts if you have them
Black seatbelts huh? I have a set of Front ones in my parts car but they are not perfect. I don't even have them removed ether. I can get some pictures of them to you if you need them.
Reply
Old Jan 1, 2014 | 12:30 PM
  #22  
Mirror Image's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2003
Posts: 859
Likes: 5
From: Birmingham Alabama
Car: 1991 Firebird convertible
Engine: LQ4 ls 6.0
Transmission: 4L60E
Axle/Gears: 342 Limited slip
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by '86 Sport Coupe
Black seatbelts huh? I have a set of Front ones in my parts car but they are not perfect. I don't even have them removed ether. I can get some pictures of them to you if you need them.
That works
Reply
Old Jan 1, 2014 | 07:22 PM
  #23  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

I should also add that these are coming out of a hardtop car. If the belts themselves won't work then at least the receivers would. I'm not too familiar as to how the belts mount in the convertible cars.
Reply
Old Jan 19, 2014 | 06:23 PM
  #24  
codyscamaroz28's Avatar
Member
 
Joined: May 2009
Posts: 156
Likes: 0
From: Paris, tn
Car: 1982 Z28, 1991 RS
Engine: 350 Carbed, 305 TBI
Transmission: 700r4, t5
Axle/Gears: 3.23s posi Limited Slip, 3.08 posi
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

have any black door panels?
Reply
Old Jan 22, 2014 | 08:24 PM
  #25  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by codyscamaroz28
have any black door panels?
No I don't. Sorry about that.
Reply
Old Jan 23, 2014 | 10:50 AM
  #26  
cozwurth's Avatar
Junior Member
 
Joined: Jan 2012
Posts: 21
Likes: 0
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Do you have any of the plastic panels from the top of the door panels? I need a pair.
Reply
Old Jan 24, 2014 | 09:10 AM
  #27  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Originally Posted by cozwurth
Do you have any of the plastic panels from the top of the door panels? I need a pair.
I got cleaned out of the only one I had when I first put this ad up. Sorry about that. Guess I'll have to update my description with what "other" stuff I actually have.
Reply
Old Feb 5, 2014 | 02:27 PM
  #28  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Just updated pictures and parts list with what I currently have available. Let me know what you need!
Reply
Old Feb 20, 2014 | 12:16 PM
  #29  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics In Pensacola FL

Bump. Fixing to update this ad with some new stuff in a few days. Keep your eyes peeled!
Reply
Old Mar 8, 2014 | 08:27 PM
  #30  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. The seat tracks are the new items of this bunch. Looking to sell some more stuff. I'm going to a car meet on April 5th so there will be a greater demand for what I have in the next coming month. Let me know what you need and lets make a deal!
Reply
Old Mar 11, 2014 | 09:12 PM
  #31  
Nickmiceli7's Avatar
Junior Member
iTrader: (1)
 
Joined: Jan 2013
Posts: 64
Likes: 0
From: Hobart, Indiana
Car: 1991 Firebird
Engine: stock 305
Transmission: Stock auto
Axle/Gears: stock
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Black cup holders?
Reply
Old Mar 12, 2014 | 01:50 PM
  #32  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by Nickmiceli7
Black cup holders?
No I don't have those. Sorry about that.

On another note I have recently managed to pull apart the dash in my parts car.
Details for it:
Out of an '86 Camaro Sport Coupe 2.8 V6 auto with A/C

Cluster is an 85 mph unit with the 7K RPM gauge. ODO shows 8XX miles on the clock. It has rolled over from 100000 or 200000 miles.

The dash face itself is not perfect and has a few cracks. The most prominent being on the passengers side center console mount.

Dash pad is cracked in 3 different places.

All A/C duct work is there. Drivers side pieces are not perfect though.

The A/C vents themselves are in pretty good shape with no cracked fins.

I've had a pretty successful time selling this stuff here on TGO so I figure I'm sold out on most of good stuff. I'd like to sell some more and help keep you guys on the road. Let me know if anything I have interests you!
Reply
Old Mar 26, 2014 | 03:34 PM
  #33  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. Gearing up for that car meet. Let me know what you need before April 5th or else I might not have it.
Reply
Old Sep 21, 2014 | 08:40 AM
  #34  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. It's been a pretty long time since I was last on here. I've still got this stuff hanging around so let me know what you want!
Reply
Old Sep 25, 2014 | 08:11 AM
  #35  
slcoble's Avatar
Junior Member
 
Joined: Aug 2014
Posts: 3
Likes: 0
From: Kansas
Car: 1986 camero
Engine: 5.0ltr
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

I am looking for the light control module not the panel control but the electronic panel that it connects to.Thanks
Reply
Old Sep 25, 2014 | 01:08 PM
  #36  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by slcoble
I am looking for the light control module not the panel control but the electronic panel that it connects to.Thanks
Do you mean the actual light switch? Can you clarify with any more details?
Reply
Old Sep 25, 2014 | 08:22 PM
  #37  
slcoble's Avatar
Junior Member
 
Joined: Aug 2014
Posts: 3
Likes: 0
From: Kansas
Car: 1986 camero
Engine: 5.0ltr
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by '86 Sport Coupe
Do you mean the actual light switch? Can you clarify with any more details?
Not the actual light switch it is the electronic box the light pod connects to.
Reply
Old Sep 25, 2014 | 08:33 PM
  #38  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by slcoble
Not the actual light switch it is the electronic box the light pod connects to.
I think I might know what you are talking about. I can dig it out and post some pictures of it. It's the eletric switch box that connects to the switch **** behind the dash right? I know that works. Pull it half way out and the dash lights come on. Pull it all the way and it makes the headlights come on.

I've never heard of it being called the "headlight module." That was kinda throwing me off.
Reply
Old Oct 5, 2014 | 08:05 PM
  #39  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. I could really use some room in my parts car right now. Got other things I'm pileing in it right now. Let me know what you want and lets make a deal.
Reply
Old Oct 13, 2014 | 08:18 PM
  #40  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. I'd really like to see this stuff go back into use! Let me know what you need.
Reply
Old Oct 14, 2014 | 10:48 AM
  #41  
LittleFranks's Avatar
Junior Member
10 Year Member
iTrader: (2)
 
Joined: Aug 2014
Posts: 54
Likes: 1
From: South Florida
Car: 92 Z28 Hawaiian Orchid
Engine: L98
Transmission: 700r4
Axle/Gears: 3.23 Posi
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Have black door panels and arm rests ?
Reply
Old Oct 14, 2014 | 12:07 PM
  #42  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by LittleFranks
Have black door panels and arm rests ?
No Door panels or armrests. Sorry about that.

I mainly have dash stuff and the big rear interior plastics these days. I got cleared out of my armrests and front interior plastics when I first put this ad up.
Reply
Old Oct 14, 2014 | 12:31 PM
  #43  
LittleFranks's Avatar
Junior Member
10 Year Member
iTrader: (2)
 
Joined: Aug 2014
Posts: 54
Likes: 1
From: South Florida
Car: 92 Z28 Hawaiian Orchid
Engine: L98
Transmission: 700r4
Axle/Gears: 3.23 Posi
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Thanks anyways brother
Reply
Old Oct 14, 2014 | 12:44 PM
  #44  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by LittleFranks
Thanks anyways brother
Your welcome. Good luck finding what you need. If you end up needing something from me again then let me know.
Reply
Old Oct 16, 2014 | 11:42 AM
  #45  
padak's Avatar
Member
iTrader: (10)
 
Joined: May 2013
Posts: 378
Likes: 5
From: Aliquippa, PA
Car: '87 Trans Am
Engine: 5.0L-V8
Transmission: 700R4
Axle/Gears: 3.23 - Posi -10 Bolt
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Black Sail Panels?
Reply
Old Oct 16, 2014 | 11:51 AM
  #46  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Originally Posted by padak
Black Sail Panels?
I do not have sail panels. I only have the large plastic pieces that go back there. Sorry about that.

Take a look at the master list to get an idea of what I have. I figure I'm exhausted on the commonly needed stuff.
Reply
Old Oct 16, 2014 | 03:22 PM
  #47  
BG1959's Avatar
Junior Member
10 Year Member
Liked
iTrader: (4)
 
Joined: Jul 2014
Posts: 51
Likes: 0
From: San Antonio, Tx
Car: 1989 IROC-Z, 1970 Camaro SS
Engine: 5.7
Transmission: 700R4
Re: 1986 Camaro Black Interior Plastics & Dash Stuff In Pensacola FL

Could use the Passengers side A-pillar trim. Is all of the plastic on it good?
Reply
Old Oct 16, 2014 | 04:20 PM
  #48  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & Dash Stuff In Pensacola FL

Originally Posted by BG1959
Could use the Passengers side A-pillar trim. Is all of the plastic on it good?
The plastic in it is good. Some sanding and paint would make it look even better if you wanted to do that.

Thing is that I've got another guy that was interested in both of the A-pilar pieces if he could not get his back in good shape. I'll mesage him and see what his plan is.
Reply
Old Oct 17, 2014 | 12:01 PM
  #49  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

BG1959 Check your inbox for a PM
Reply
Old Oct 27, 2014 | 11:54 AM
  #50  
'86 Sport Coupe's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2013
Posts: 123
Likes: 0
From: Pensacola FL
Car: 1986 Camaro Sport Coupe (Part Out)
Engine: 2.8 MPFI V6
Transmission: 700R4 Automatic 4 speed
Axle/Gears: 3.42 Open With Drum Brakes
Re: 1986 Camaro Black Interior Plastics & More In Pensacola FL

Bump. Still looking for interested parties. Needing this stuff gone. I'd love to see this stuff go back on running cars!
Reply



All times are GMT -5. The time now is 12:40 AM.